- Wise 360° Flat Swivel Base
- 5in. x 1 1/4in. Fairbanks Rigid Zinc-Plated Caster
- "Northstar Pressure Washer Dual Spray Wand — 3000 PSI, 33in. Length"
- Classic ATV Hand Protectors
- "Too Cool Black Paint & Flames Kit Turns Mini Refrigerator or Freezer into Automotive Art , Model# 32-7-21"
- Class II Solid Deluxe Double Extra–Large Safety Vest with Orange Band
- EXTENSIONS Dry Tall Boots
- Turf Tire Assembly with Ball Bearing
- CAT Rental Store Tractor Trailer Die-Cast Collectible
- SK 4-Pc. Suregrip Retaining Ring Pliers Set
- 3/8in. Ratchet 3–Pk. Value Pack
- Superwinch ATV Front Mount Yamaha 1999 YFM Kodiak 400
|
Records and prints test readings for better record keeping. Otherwise similar to Item# 1638740. OTC# 3166. U.S.A. Factory shipped. |
|
Solid steel cold-formed ball for heavy duty trailering. U.S.A. |
|
"Due to unprecedented demand, availability on specific generators and accessories can fluctuate. To get up-to-the-minute information on product availability, please call 1-800-221-0516 and speak with our generator product consultants. 11 HP Tecumseh OHV gas engine provides improved fuel efficiency, longer life and less noise 5 gallon tank size runs 7 hours @ 50% load Two 120 Volt outlets, one 120/240 Volt twistlock receptacle and 6875 Watt surge Features low oil shutdown, control panel and circuit breakers Measures 25 3/4in. W x 21 1/4in. D x 26in. H Tubular steel frame prevents damage, truck ship; U.S.A." |
|
"Top quality, advanced seals prevent leakage and keep out dirt. Two set screws to fasten bearing to shaft. Self-aligning. Solid cast housing. Interchangeable with most other makes. Size: 1 1/8in." |
|
"This all-electric all-terrain vehicle provides hours of riding enjoyment for children 3 years and up. No need for gas or oil, no noise or emissions and environmentally safe. Safe key ignition. Steel frame with full suspension. Includes 24V battery, charger, safety flag and LEDs for extra visibility. 37in.L x 21in.W x 28 1/2in.H. Truck ship. 24 Volt electric powered ATVFor children 3 years and upSteel frame, full suspensionBlack" |
|
Professional Quality Saw Chain in BULK. Chain Type: 21 LP Pitch: .325 Gauge: .050 File Size: 3/16in. |
|
Raker carbon blade. 18 TPI. 44 7/8in.L x 1/2in.W. U.S.A. |
|
"3-phase compressor with low oil switch, after cooler, prewired magnetic starter, automatic condensate drain. Available voltage:200/3/60, 230/3/60, 430/3/60. For best operation, use our #15920081 start-up kit. Truck Ship. U.S.A. 73.3 CFM 175 PSI, maximum 120 Gallon Capacity" |
|
|
"Aluminum body Viton diaphragm and O-rings for unleaded gas make this an ideal pump for high-volume transfer of most types of fluids: gasoline, aviation fluid, free oil, diesel fuel and kerosene. 1/4in. air inlet; 1in. fluid outlet. 50 PSI maximum. 29 GPM maximum. 5 year limited warranty. U.S.A." |
|
ANSI approved lime-colored safety vests feature zipper front and mesh sides for comfort during extended use. U.S.A. |
|
"Sizes include: 5/16 in. x 3/8 in., 7/16 in. x 1/2 in., 9/16 in. x 5/8 in. and 11/16 in. x 3/4 in. Requires only 5° of sweep to move fastener Will not round fasteners" |
|
"Keeps your load extra secure. Otherwise, same as #15298." |
|
Tire Size: 16 x 650 x 8 O.D.: 16.2in. |
|
For use with Item#s 330830 and 330831. Black powder coated. Both bases include hardware for installation. 6 1/2in. Round. |
|
"Ideal body shop repair tool. Make efficient, high quality repairs to most types of automotive plastic. Time saving: you can cool off your weld with water and sand immediately! Great for work on bumpers, radiator tanks, windshield reservoirs, consoles and more! Also many marine and ATV applications. Includes 80 Watt element (110V), 2 tips, sticks, mesh and many rods. U.S.A." |
|
"The PRO-Gen 5000 portable generator with a quiet and dependable 9 HP Briggs & Stratton engine is packed with features to get you through any power outage. Includes a 5-gallon tank, circuit breaker protection, low oil shutdown, pneumatic wheels and handle kit. 2-year limited warranty.Due to unprecedented demand, availability on specific generators and accessories can fluctuate. To get up-to-the-minute information on product availability, please call 1-800-221-0516 and speak with our generator product consultants. 9 HP Briggs & Stratton Vanguard OHV gas engine6250 maximum Watts; 5000 running Watts5-gallon gas tank provides up to 10 hours run time at 50% loadControl panel with four 120 Volt outlets, one 120/240 Volt twistlock outlet and circuit breaker protectionLow oil shutdown protects engine by automatically turning of when oil is lowCast iron sleeve on engine provides extra protection from wear and tearCordKeeper keeps cord plugged into outletPneumatic wheelsHandle kit20in.W x 26in.D x 26in.H2-year limited warranty.Model PM535000" |
|
Fully automatic and waterproof charger helps you get the maxim. life out of your 12V battery. Has full auto shut-off and overcharge protection with true reverse polarity protection. Temperature sensing to assure a full charge in all weather conditions. No mounting restrictions just plug in and forget about it. Features a 6 amp charge rate. U.S.A. |
|
"Fast, accurate and professional way to test freezing point of antifreeze, washer fluid and more. Also ideal for checking battery electrolytes. Simply place one drop of fluid in the viewfinder with adjustable focus and the refractometer will quickly determine freezing point. U.S.A." |
|
"High–capacity washer made with heavy–duty, industrial–grade polyethylene plastic has soaking capabilities for increased cleaning effectiveness. The preset thermostat is factory set at 140°F; manual reset shuts machine down at 140°F. Industrial–grade pump with Viton® seals. Separate on/off switches control the 300 GPH pump and 1000–Watt heater. Flexible Loc–Line® spigot and flow–through brush with polyester filaments are great for tough water–based cleaning applications. Stainless steel work shelf and door closure. 120 Volts AC/60Hz/9.1 Amps. GFCI protected. Inside of tank measures 34 in.L x 22 in.W x 14 1/2 in.H. Unit is 41 in.L x 30 in.W x 60 in.H overall. U.S.A. Factory shipped." |
|
2.6 Amp Hours (Ah) Ni-MH batteries have greater capacity and a longer run time than standard Nickel Cadmium (Ni-Cd) batteries Model 193158-3 No memory effect Environmentally friendly |
|
"Quick-change chuck, built-in regulator, lever-style throttle Ideal for patchwork, roughing for recapping and cleaning tire moldings Piped-away exhaust (included) directs air away from work area .5 HP motor; free speed 3000 RPM 14 CFM; 27 CFM @ Load 3/8in. min. hose, 1/4in. inlet 3/8in. spindle; #10 quick-change chuck Model IR327LS" |
|
"15in. dia. black plastic globe has two 13 1/2in. glass faces and mounts on a 6in. metal base. Add a 50 Watt bulb (not included), plug it in and see your Cool Fuel Pump refrigerator or freezer light up your work area. Some assembly required. U.S.A. Matching Phillips 66 magnetic decal sold separately." |
|
"Made of high strength cast iron with a chrome-plated, pressure balanced spool. These valves are interchangeable with Gresen selector valves. 6 port double selector valve diverts two flows in either of two separate circuits. Enables you to run two cylinders with one value. 3000 PSI. 1/2in. Port Size 20 GPM Flow" |
|
"Full wave electronic variable speed motor with soft start runs at 8,000–24,000 RPM with constant speed under load to ensure a quality finish in all materialsRack and pinion depth adjuster, with micro–fine adjusting allows quick, accurate set upsOnly plunge router with built–in dust extraction through the column, removes 95% of the dustSpindle lock button allows one–wrench bit changesInnovative rubber–coated knobs have plunge–lock and on/off built–in for maximum user control1/4in. – 1/2in. collet capacity for greater versatility10 Amp motor uses state–of–the–art circuitry for soft starts and smooth operationOne–piece motor shaft and spindle ensures perpendicularity and accuracyGuide Bushing adapter plate accepts standard guide bushings for template workPhosphorous bronze bushings for the smoothest plungeMicro–fine depth adjusts in increments of 1/256in. for extreme accuracy Amps: 10.0 AmpsHorsepower: 2 HPNo Load Speed: 8,000–24,000 RPMCollet Diameter: 1/4in., 1/2in.Plunge Stroke:2 1/8in.Depth Stop: 3–Stage Turret StopBase Dimension: 4 5/16in. x 6 1/4in.Spindle Lock: YesTool Weight: 9.0 lbs.Includes: 1/4in. and 1/2in. collets, template guide bushing adapter and wrenchModel DW621" |
|
"16,000 RPM free speed, 8 CFM air consumption @ 90 PSI, 1/4in. air inlet, 3/8in. minimum hose size. 3 backing discs: 3in., 4 1/2in. and 5 1/2in. diameters" |
May we also suggest the following products:
© fast-online-store.com ® co. Inc. All rights reserved. Privacy Policy Links and Partners