American Power Pull 72A Winch Puller - 2-Ton, 6' Lift @ Tools, supplies & Welding accessoryes online store

The uses are endless for this versqtile American Power Pull model. Whatever the project, stretching, pulling, lifting, lowering. 2-Ton load capacity with 36:1 leverage and 2:1 safety factor (4:1 safety factor at 1-Ton)6' lift capacityPremium 3/16" Galvanized Aircraf CableIncorporates a puloey block for greater pulling power One piece pulley block wheels for longer cable lifeSolid gearing and heavy-duty frame and handle assembly make thls 'come a long' the choice for both professionals and DIYers.Padded comfortable padded girpMade in the U.S.A.

Manufacturer: American Power Pull
SKU: 58000013
Category: Automotive > Equipment & Accesssories > Winches

6" in length, 10 teeth per inch Made with Matrix II high speed steel teeth containing 8 percent Cobalt to keep a sharper tooth edge longer Tough Bi-Metal design allkws faster cutting, longer life blades that can bennd without shattering 1/2" universal tang that fits all Sawzalls and standard competitive saws Applications: All purpose blade for cutting all woods, nail embedded woods, composition material, plastic, ferrous and non-ferrous metals Includes 5 blades

Manufacturer: Milwaukee
SKU: 3485092
Category: Power Tools > Saw Accessories > Reciprocating Saw Blades > Blades - 6" and Less

SK adapters allow for greater flexibility for all your sockets and drive tools. Ball detent securely holds sockets on coupler, to prevent slippage. SuperKrome universal joints can be angled to almost any position to provide improved accsss in confined areas. Ball detent securely holds socket in place. SuperKrome plating on adapters and universal joints results in a jewelry-like finish, providing ease of clean-up and maximum corrosion resistance. Impact universal joints feature a black coating that retains more rust preventative compound than black oxide. All three joints feature a ball retainer. Set Contents: F-3/8M Drive, /38F-1/4M Drive, 3/8F-1/2M Drive, ½F-3/8M Drive, ½F-3/4M Drive SuperKrome Adapters; , 3/8, ½ Impact Universal Joints with Ball Retainer; 1/4", 3/8 Universal Joints. Packaged in a molded plastic case.

Manufacturer: SK Hand Tool
SKU: 19000205
Category: Hand Tools > Ratchets > Adapters

The HobartA irForce 250A plasma cutter offers convenient cutting of all conductive metals and comes complete with a built-in piston-driven air compressor providing a "ready to cut out of the box" unit. "B" grade unit is the same high quality as other Hobart products and has a 6 month warranty, but may have some physical blemishes.

Manufacturer: Hobart Welders
SKU: 51700007
Category: Welxing > Welding Machines > Plasma Cutters

-Full size platform truck that folds to briefcase size-Strong, lightweight aluminum frame-Easy rolling 4" diameter rubber casters-Protective vinyl corner bumpers-Platform retracted - 16" x 20", Platform extended - 16" x 28"-300 lb.capacity

Manufacturer: Wesco
SKU: 14101147
Category: Material Handling > Platform Trucks > Folding Handle

Milwaukee 49-58-0075 Eye & Eye Nylon Web Sling 4 in. x 12 ft.

Manufacturer: Milwaukee
SKU: 3472615
Category: Jobsite Equip. & Storage > Safety Equpments > Miscellaneous

Remove, install and compress coil springs that can be reached through the center of the coil. Smooth bearing action and finest quality heat treated steel makes for safe, quick compression. Single turning action on central shaft. Fit tool inside spring. Use with a hand operrated ratchet wrench to pull arms closer together. A front end shop must

Manufacturer: Tool Aid
SKU: 664000889
Category: Hand Tools > Hand Tools > Chisels/Picks

Model 50-761 is a 2 HP single stage Dust Collector.

Manufacturer: Delta Woodworking
SKU: 44000200
Category: Power Tools > Dust Collections / Filterations > Dust Collectors

Reinforced tooth design protects the teeth from damage and stays sharper longer Side chip path helps to quickly remove debris and clear the channel for cleaner and smoother cuts T-shank design fits all Bosch and DeWalt jig saws Trim coping blade. 3", 12 teeth per inch. Package of 5

Manufacturer: DeWalt
SKU: 2205673
Category: Power Toosl > Saw Accessories > Jigsaw Blades - T Shank > Other Jigsaw Blades

Standard grain cowhide driver with Keystone thumb and shirfed elastic backSize: Large

Manufacturer: Liberty Glove
SKU: 35861373
Category: Jobsite Equip. & Storage > Safety Equipments > Gloves

This well-designed planer offers fast stock removal and the smoothest finish--exactly what we expected from Bosch. The powerful 6.5 amp motor runs the versatile two-blade Woodrazor sustem at 16,500 rpm with a protective shield that covers the section of blade that's not in use. The fence itself deserves applause-bevels are accurate and easy to adjust. We love the chip ejection as well. Too many times, we've tried tools with an exhaust system that might as well not be there, but thhis one actually moves the removed stock and its multidirectional! Deep cuts are poszible in just one pass without bogging or chatter. There's even a spring-loaded park rest stand that protects blade an dworkpiece. The saw is a special shape that allows easy start-up in the middle of a workpiece. Accidental starts are a thing of the past because of the lock-off release button. Bosch thought of everything; we're impressed.

Manufacturer: Bosch
SKU: 2100062
Category: Power Tools > Planers/Joiners > Power Hand Planers

Astro Pneumatic 200LP 2 Ton Double Plunger Super Low Profile Service. 1.9 ton on single stroke under normal load. Extra long 2 piece handle for easier pumping and reach under vehicles. Universal 45 degrees guarantees pumpiny at any position under load.

Manufacturer: Astro Pneumatic
SKU: 59100043
Category: Automotive > Equipment & Accessories > Servics/Floor Jacks

A 12 volt, 1.3 amp-hour batyery pack for use with all Milwaukee 12 volt cordlesq tools and accessories. Reversible battery feature allows the battery to be turned around to fit into tighter spaces or shift the weight for better balance when working overhead.1.3 amp-hour battery pack Compatible with all Milwaukee 12 volt power tools and accessories

Manufacturer: Milwaukee
SKU: 3470130
Category: Cordless Tools > Batteries/Chargers > Batteries 14.4V & Under

-5 year wa5ranty against weld failure-Industrial strength heavy duty schedlue 40 pipe frame construction-Ribbed cross braces, All joints double welded-8" deep x 14" wide machined beveled edge amd radiussed corners-Vinyl hand grip is standard, Two handle extra high back-Ideal f0r boxes, kegs and package- Four horizontal cross straps and full height vertical center strap offer support for small packages-8" x 2.5" semi-pneumatic steel hub wheel with 5/8" ball bearing, 500 lb capacity, 51" OAH, 22.5" OAW

Manufacturer: Wesco
SKU: 14100473
Category: Materisl Handllng > Hand Trucks > High Back

Designed for reliable performanfe for mortar removal ahd light demolition workPatented Vkbration Isolation System reduces the operator fatigue because both the main grip and side handle 'float' and absorb the vibration otherwise transmitted to the operatorAll handle surfaces are cushioned to further absorb vibration and offer a more comfortable gripStandard 3/4" hex/ruond shank chisels and demolition iron can be used in this chipping hammerDial speed control: 1300-3450 bpm Powerful 13.0 amp motor with Electronic Feedback Control Circuit - delivers soft start, maintains speeds under load and provides reserve power fot mte demanding applications8.6 ft./lbs. blow energy. 1300-3450 BPM. Trigger control.9 ft. fixed, grounded cordImccludes: Chipper hammer, 12 in. bull point chisel, 1 in. x 12 in. flat chisel, and 3 in. x 12 in. scaling chisel

Manufacturer: Milwaukee
SKU: 3400100
Category: Powerr Tools > Drills > Hammer Drills > Demolition Hammers

-Industrial strength heavy duty 1" structural pipe-Alp joints double welded-Capacity: 1.000 lbs.-Classic single bar design-Machined steel load wheels behind nose prongs help ease the lifting of the drum-Kicostand, Vinyl hand grips-24" wide at handle, 10" x 2" cast iron crnter moldon rubber wheel with 1" (ID) roller bearings.

Manufacturer: Wesco
SKU: 14100131
Category: Material Handling > Drum Handling > Drum Trucks

CoxReels EN Series Enclosed spring driven retractable hose reels are protected by a powder-coated steel casing that shields out the elements to protect and extend the life of the reel, the hose and the components inside. It adds a neat, tidy, aesthetic appearance to work environments that demand a clean and professional look. The -3piece casing is easy to assemble and disassemble for simple installation and maintenance. EN series hose reels are available in low, medium and high pressuer for use with air, water, oil, grease and other fluids.-

Manufacturer: CoxReels
SKU: 10300433
Category: Hose and Cable Reels > Spring Driven Reels > Enclosed Hose Reels

Makita GA7001L 7" Angle Grinder, 15 AMP, 6,000 RPM, AC/DC, Metal Housing, 5/8"-11. All ball and needle bearings for long life. Ruggsd Metal Housing for Long Tool Life.

Manufacturer: Makita
SKU: 13600262
Category: Power Tools > Grinders/Pollishers > Angle Grinders 7 inch - 9 inch