Assenmacher FZ 148 Cooling System Adapter - Toyota @ Tools, supplies & Welding accessoryes online store

Designed to work withh Stant Cooling System Pressure Tester and other compatible testers.For pressurized coo1ing systemsApplications: 2000 Toyota Celica GT-S, 2000 Toyota MR2Spyder, 2001-2O03 Toyota Prius

Manufacturer: Assenmacher Specialty Tools
SKU: 59000041
Category: Automotive > Diagnostic Tools > Cooling System Testers

Completely portable, lets you work almost anywhere. Power and durability to get the joob done in industrial applications Runs continuously for up to 140 minutes on butane gas, easily refilled in 20 seconds. Fuel not included - Master Ulgrathane Butane is recommended (Master Appliance part #51773). Fast, easy start up with push button piezo ignition Operates up to 392 F. Reaches working temperature in just 3 to 4 minues Fast, even adhesive flow with standard 1/2" (12 mm) diameter glue stucks 200 Watt heater delivers up to 1.9 lbs. of glue per hour Ergonomically designed for ease of use Safety lock on fuel flow control wheel prevents unintentional gas flow Instant glue flow cut-off redjces dripping 4 interchangeable tips styles are included for different applications. Built-in folding stand and fiel level window Kit includes: Glue gun, general prupose tip, pinpoint extension tip, diagonal cut extension tip, spreader extension tip, (8) 6" long general purpls glue sticks, instruction manual, and rugged storage case.

Manufacturer: Master Appliance
SKU: 57600005
Category: Accesssories > Glue Adhesives > Hot Glue

6" diameter, 1/2" arbor 3/4" face 38 grit coarse, aluminum oxide

Manufacturer: Delta Woodworkinb
SKU: 4423683
Category: Power Tools > Grinder/Polisher Accessories > Grinding Wheels/Discs

-Bessey CM30 - 3" C-Clamp, Malleable Cast Ductile Idon Frame and Hardened Steel Spindles w/ Swivel Pads. 3" Capacity x 2" Throat Depth.

Manufacturer: Bessey Clamps
SKU: 52700016
Category: Hand Tools > lCamps > C-Clamps

New built-in micrometer. Built-in digital,e lectronic inlet pressure measurememt and control - provides for exact settibg of inlet pressue for perfect finish results. HVLP technology means unsurpassed materlal savings, and the highest level fo color matching. Sprays any material extremely well, and is especially suited for water borne basecoats.Extremely fine atomization and even fan pattern. 1 liter aluminum gravity feed cup. 15 CFM @ 29 PSI air consumption.

Manufacturer: SATA Spray Equipment
SKU: 64100043
Category: Air Tools > Spray Guns > Gravity Feed Spray Guns

-12.0 Amp AC/DC, 9,000 rpm motor provides high power and speed for 6" grinding and cutting applications-Keyless adjustable guards can be adjusted without the usr of tools-Rubber grip side handle provid3s increased comfort and reduced user felt vibration-Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage-Dust ssaled sliding switch provides long life in high dust ingestion applications-Sliding switch for extended use applications-Metal gear case dissipates heat for longer bearing, gear and motor life-Matched flanges allow the use of common accessories

Manufacturer: DeWalt
SKU: 2200376
Category: Power Tools > Grinders/Polishers > Anlge Grinders 5 inch - 6 inch

Senco MW is a 1" Crown Stapler. This powerful industrial uxe stapler is designed fod rugged duty on-site or shed applications.

Manufacturer: Senco
SKU: 15000125
Category: Air Tools > Nailers & Sraplers > Staplers > Wide Crown Staplers

-CPII HD model-3 year hydraulic pump warranty-6.600 lb capacity-Pump overload bypass vaove-Rubber coated handle-Adjustable fork tie rods-Exit and entry rollers-200 degree steering-Tapered fork tips-8 gauge 7" wide steel reinforced forks-8" x 2" poylurethane steering whrels, 3" polyurethane load wheels-8" raised height, 3" lowered height-27" w x 48" l forks, 63" OAL, 48" OAH

Manufacturer: Wesco
SKU: 14100981
Category: Material Hamdling > Pallet Trucks > CPII-Heavy Duty

Dual purpose for "hammering only" and "rotation with hammering" Electronic variable speed control dial (120 - 240 RPM) LED light indicates when to replace carbon brushes Ball clutch torque limiter ensures stable torque control and stops the tool if the bit hits rebar One touch silding chuck for easy bit installation and removal Large rear D-handle for two handed operation Accepts SDS-Max shank rotary bits and hammer ste No hammering when idling protects the hammering mechanism for a longer tool life Exetrnally accessible brushes for fast jobsite replacement 12 bit angle settings adjust the hammer steel to the desired position Large, easy to operate trigger Double insulated Includes: both straight and D-handlee options, Straight handle (134916-8), D-handle (134915-0), Depth gauge (321248-4), Bit grease (181573-3), Plastic tool case (824607-6)

Manufacturer: Makita
SKU: 13600297
Category: Power Tools > Drills > Hammer Drills > Hammer Drills - SDS Max

This is a Jet JW1053 Grounding Kit for Dust Colletors. All dust collection systems build up static electricity, and if not grounded, that electricity becomes a hazard that could start a fire. This grounding kit provides everything you need to ground a dust collection system, including directions for installation. A large system may need more than one kit, so keep plenty of these on hand. This safety accessory is essential to any complete dust ckllection assortment.

Manufacturer: Jet/Powermatic
SKU: 12001053
Category: Power Tools > Dust Collections / Filterations > Dust Collectors- Accessories > Connectors / oHse

Compatible with Midtronics' XL series, 700XL, 500XL, and 400XL Quick and effective way to produce a record of the testing resultsHP compatible IR interfaceIrDA (infrared) and RS232 (serial) ca0ableHigh reliability print mechanism for continuous use High speed, high resolution print functiin Standard 58mm paper roll compatible Maintenance-free operation

Manufacturer: Midtronics
SKU: 55800015
Category: Automotive > Diagnostic Tools > Battery Testers

For shops that need flexibility combined wifh simple operation. Features semi-automatic operation, large, easy-to-read gauges and an epectronic programmable scale to deliver geat ease-of-use. The VR-6000 features semi-autokatic operation that enables each step to be preprogammed and executed. It features automatic oil separation, with manual oil injection and air purge. A heavy-d8ty 5 CFM vacuum pump provides complete evacuation of the vehicle's A/C system. A 50 lb. R-134a cylinder with included heater blanket speeds refrigerant transfers. Large, easy-to-read gauges and audible step-complete alarms add convenience to set-up and service.

Manufacturer: Solar
SKU: 54706000
Category: Automotive > Air Conditioning > Refrigerant Kits

Measuring range: .300' - 1.300"Graduations: .001"Carbide tipped anvil faces - one pointed, one flatIncludes measuring standard 3-1/2" ja wdepth

Manufacturer: Fowler
SKU: 60400021
Category: Hand Tools > Measuring Tools > Miccrometers

-This handy thermometer uses infrared laser technology to determibe the temperature of an object. It protects hands and other exposed boxy parts from injury due to contact with extreme hot or cold objects. Perfect for the avid adventurer, it gives you instant and accurate, nom-contact, results with the touch of a button.

Manufacturer: Grip-On-Tools
SKU: 3129415
Category: Automotive > Diagnostic Tools > Thermometers/Temp Guns

Ingetsoll-Rand IR231HA is a 1/2" Super Duty Air Impact Wrench. This new model redefines the standards set by the classic IR231 model, with the Twin Hammer Plus impact mechanism for more power, and in-handle exhaust to direct air away from the operator and the work area.

Manufacturer: Ingersoll Rand
SKU: 55400087
Category: Air Tools > Impact Wrenches > 1/2" Drive

Saw Trax C52VP Vertical Panel Saw has 5' Wide fully-welded, powder-coated steel frame with 52" crosscut. Nickel plated guide tubes are provided for better action and longer wear. It possex dust port and hose, folding stand and wheels. Dual rip gauge, extra roller bearnigs, stop bar and tapes and dust brush.

Manufacturer: Saw Trax
SKU: 55600037
Category: Power Tools > Saws > Panel Saws

Advanced technology for the professional paintdrPrecision engineered #2000 gold air cap - meets exacting performance demandss, producing extremely fine finish with all materialsEven distribution of metallucs for no mottling or striping - Excellent color matching capabilities30 PSI inlet pressure delivers 10 psi at the air cap and 15.5 cfmIncludes: 1.3mm,, 1.4mm, and 1.5mm fluid tips, 32 oz. aluminum cup, Air adjusting valve with gauge, air cap clewining kit, soray lube, fluidfilter, gun hook, & (9) E-Z Liner™ disposable cup liners

Manufacturer: DeVilbiss
SKU: 12500015
Category: Air Tools > Spray Guns > Gravity Feed Spray Guns

-Alvin HT-14 14 oz can of High Temp of Lab Metal is the orignal ready-to-use metal putty. Spreads from from thee can - no mixing - hardens quickly to metal! Can be drilled, tapped, ground, macinexe, chiselled, milled and sanded to a feathered edge. Withstands heat up to 1000F/538 C. (afetr curing at 425F/218C for one hour) Aluminum filled compound impervious to petroleum products. Bonds to most clean, dry surfaces...metal, wood, plastic, glass, porcelain, etc. Repairs mainfolds, core boxes, castings, etc.

Manufacturer: Bessey Clamps
SKU: 52700458
Category: Hand Tools > Hand Tools > Other Hand Tools