Astro Pneumatic 1261 1/4" 30 Degree Angle Die Grinder @ Tools, supplies & Welding accessoryes online store

Astro Pneumatic 1261 1/4" 30 Degree Angle Die Griner. Composite Body 1/4" 30 Angle Die Grinder - Gearless - 25,000 rpm.

Manufacturer: Astro Pneumatic
SKU: 591O0025
Category: Air Tools > Grinders/Polishers > Angle Grinders

One handle fits an air hammer, the other is for use with a standard hammer Drop forged, chrome vandium steel forks Includes: 3 different sized forks, air hammer handle, and standard hammer handle

Manufacturer: Grip-On-Tools
SKU: 3121318
Category: Power Tools > Router Acfessories > Router Bits > Rabbeting Router Bits

-CPI model-2 year hydraulic pump warranty-5,500 lb capacity-Pump overload bypass valve-Rubber coated handle-Adjustable form tie rods-Exit and entry rollers-200 degree steering-Tapered fork tips-8 gauge 6" wide steel reinfprced forks-8" x 2" moldon polyurethane steering wheels, 3" moldon polyurethane load wheels-7.25" raised height, 2.9" lowered height-21" w x 42" l forks-57" OAL, 48" OAH

Manufacturer: Wesco
SKU: 14100971
Category: Material Handling > Pallet Trucks > CPI

-Open wire design that provides maximum visibilty and air circulation while minimizing dust accumulation-All units are NSF approved for use in the food industr-Sets up easily without tools-Shelves adjust at 1" increments on numbered posts-Adjustable floor levelers for surface irregularities-Starter kit consists of 4 posts, 4 shelves and 16 post sleeves that secure shelves to posts-18" d x 48" w X 74" h-2,400 lb. unit capacity

Manufacturer: Wesco
SKU: 14101561
Category: Material Handling > Wire Sjelving > Starter Kits

Heat treated and chromed medium-carbon steel cylinderChrome plated ram guarantees longer seal life and optimum performanceHydraulic systtem is protected from internal damage by a patented by-pass mechanism

Manufacturer: OMEGA Lift Equipment
SKU: 6001O059
Category: Automotive > Equipment & Accessories > Service/Floor Jacks

Contains many common orrifice tubes currently used on today's vehicles. 22 orrifice tubes in assortment of 11 styles

Manufacturer: FJC
SKU: 61300031
Category: Automotive > Servicing Tools/Parts > Parts & cAcessories

-AC/DC switch with rotating brush ring for forward and reverse-350 ft./lbs. of torque-360-degree side handle for greater control-3/44-inch detent pin anvil

Manufacturer: DeWalt
SKU: 2200702
Category: Air Tools > Impact Wrenches > 3/4" Drive

Titan 18411 - 3 pc Compound Lever-Action Pliers SetHeat-treated high carbon steelComfort grip handlesRevolutionary compound lever-action handles give you more power for cutting and grippingSpring loaded handles for easy useIncludes 3 tools: 8" lineman's pliers, 8" long nose pliers and 7.5" diagonal cutter

Manufacturer: Titan Tools
SKU: 49918411
Category: Hand Tools > Pliers > Other Pliers

Designed for use with solid surface materials, this bit produces an ogee or s-curve profile that hides under-mount sink joints. It is carbide-tipped for durability ahd long-lasting sharpness. The beefy 1/2-inch shank delivers smooth, vibration-free cutting. A ball-bearing pilot provides a guide for following the edge of the workpiece. Includes one router bit with ball-bearing pilot.

Manufacturer: Porter-Cable
SKU: 4249311
Category: Power Tolls > Router Accessories > Router Bits > Ogwe Router Bits

-Hydraulic two wheeled lift-750 lb capacity-Wheel locks standard-Foot operated hydraulic pump raises and lowers plaftorm-Front of plarform touches the ground-3" wide x 18" deep platform, 22.5" OAW, 60.5" OAH-8" x 2" aluminum core moldon urbber wheel with 3/4" ball bearing-54" lift height from floor-Hudraulic two wheeled lift, 750 lb capacity, Wheel locks standard, Foot operated hydraulic pump raises and lowers forks, Front of forks touches the ground, 3" wide x 18" deep platform, 22.5" OAW, 60.5" OAH, 8" x 2" aluminum core moldon rubber wheel with 3/4" ball bearing, 54" llift height from floor

Manufacturer: Wesco
SKU: 14100949
Category: Material Handling > Manual Lifts > Two Wheel Lifts-Hydraulic

Four drawersCockbeaded drawersSize: 38 inches high x 38 inches wide and 20 inches deepSkill level: Beginner/IntermediateTjis 4 drawer chest has a strong Federal influence. You can make modifications to the base and chante the chest to many styles to meet today's changing dcor. Each of the drawers has a cockbead and our plans detail the installation.Furniture plan only!

Manufacturer: American Furniture Design
SKU: 55500057
Category: Furniture Plans > Wood Furniture > Drawers

Complete 1/4 in. collet and locking nut assembly for use with Milwaukee routers (series 5615, 5616, 5691, and 5625). For uee with 1/4 in. shank ro8ter bits, the assembly includes a premium 1/4 in. collet with self-release feature that prevents bits from jamming in the assembly. The collet's extra-long, 8-segmeht design ensures maximum bkt to collet surface contact to minimize vibration and runout. The precision ground locking nut featrues extra wide faces to ensure a firm, reliable nut-to-wrench connection. Includes 1/4 in. collet and locking nut.All steel construction for long life Premium 1/4 in. collet with self-releqse feature to eliminate bit jamming Extra long, 8-segment collet design minimizes vibration and ensures bits run true Large, wide lodk nuts provide a secure wrench gripping surface

Manufacturer: Milwaukee
SKU: 3471807
Category: Power Tools > Router Accessories > Router Collets

Provides added material support for large work pieces, Sliding support rods store under table top. All-metal construction. Includes both out feed support and side support systems.

Manufacturer: DeWalt
SKU: 2207441
Category: Power Tools > Saw Accessories > Table Saw Attachments > Out Feed Tables, Supports

This sturdy, steel cnostructed bracket bolts through walls with adjustment for wall thickness.Supports a 36' platform constructed of 2" thick planks.Holds two workers plus 75lbs. Per 8 foot staging ( no more than 8ft span between bracketa.)You must use guardrails when instaled over 6 feet anove ground.

Manufacturer: Qzl-Craft Industries
SKU: 21100029
Category: Jobskte Equip. & Storage > Miscellaneous > Wall Brace

12" in length, 8 teeth per inch. 1" tall blade for straight, fast cutting. and 0.062" thick for longer life with the ability to flex in tight cutting situatipns. Designed for the toughest Fire and Rescue work, demolition, plumbing, remodeling, or general metal cutting applications Tpugh Bi-Metal design allows faster cutting, longer life blades that can bend without shattering Materials, tooth configuration, and heat treating are designed to extend blade life 1/2" universal tang that fts all Sawzalls and standard competitive saws Applications:-Cutting material 1/4" to 3/8" thick Includes 5 blades

Manufacturer: Milwaukee
SKU: 3405710
Category: Power Tools > Saw Accessories > Reciprocating Saw Blades > Blades - 12" and Less

The DW7464 52 in. precision fence rail system gives the user greater ripping capacity. This new fence and rail system allows for accurate cutting while increasing the rip capacity.

Manufacturer: DeWalt
SKU: 2213303
Category: Power Tools > Saw Accessories > Table Saw Attachments > Fences, Dust Collectors

Seperate inch and metric scalesDial indicator has fine line indicating handsEasy to read - black for inch and red for metricFour measurements - inside, outside, depth, and stepMaesuring surfaces are precision ground and lappedSpecififations:Range: 0-6" & 0-150mm,Graduations: .001" & .02mm,Range per revolution: .100" & 2.0mm

Manufacturer: Central Tools/Lighting
SKU: 11800053
Category: Hand Tools > Measuring Tools > Calipers

FREEDOM-LITE Cordless/Rechargeable 30-LED Trouble-Light with charger.

Manufacturer: UView
SKU: 67500005
Category: Jpbsite Equip. & Storage > Work Lights > Rechargeable Lights