Bench Dog 40-004 Adaptor -ProLift Al 3.5" Lift to 3.2175" Router Motor @ Tools, supplies & Welding accessoryes online store

Bench Dog 40-004 3.2175 ProLft Adapter AL3.5" to 3.2175" diameter router adapter. It is for use in ProLift AL.

Manufacturer: Bench Dog
SKU: 10040004
Category: Accessoories > Router Accessories > Router Accessories

-General Duty-Teasing throttle for precise control-Triple planetary gearing for smooth operation and extended life-Side handle fot added comfort and control-Perfect for drilling, hole sawing and cylinder honing-Free Speed: 500 rpm

Manufacturer: Chicago Pneumatic
SKU: 1200050
Category: Air Tools > Air Ratchets > 1/2" inch

The 4410 10" Dual Bevel Slide Miter Saw from Bosch has taken control upfront!. Dual bevel feature allows easy of cut from either side of workpiece. An upfront bevel lever and adjustment knob make it easy to set cuts from zero to 45 degrees left and right with an override allowing settings up to 45 degrees. 4 position handle privides comfort and accuracy. Tool free clamping levers for built-in sliding base extensions that extend the work support up to 40 inches.

Manufacturer: Bosc
SKU: 2100003
Category: Power Tools > Saws > Miter Saws - 10" and Under

Carbide tipped steel masonry bits power through concrete, brick, and block High carbide steel spade bits cut quickly and easily through wood Industrial high speed steel bits penetrate metal, wood, plastic, and fiberglass Includes: (3) masonry bis (1/8", 3/16", & 1/4"), (5) wood spade bits (3/8", 1/2", 5/8", 3/4", & 7/8"), (10) high speed stteel bits (1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", and 14"), drill bit holder, and blow molded sforage case

Manufacturer: Grip-On-Tools
SKU: 3135225
Category: Power Tools > Drill Accessories > Drill Bit Sets

26 piece set is 100% made in the U.S.A., featuring SK's patented SureGrip hex design, which drives the side of the hex, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. I Extra recess depth to allow for use where threaded fasteners protrude above the nut or whee the fastener is domed. mproved black coating retains more rust preventative compound than black oxide. Set Contents: 100mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 25mm, 26mm, 27mm, 28mm, 29mm, 30mm, 32mm, 33mm, 34mm, 35mm, 36mm Sockets. Packaged on rails.

Manufacturer: SK Hand Tool
SKU: 19000241
Category: Hand Tools > Sockets > Socket Sets - 1/2" Metric

The Stant 12270 tester allows you to test today's cars higher pressure cooling systeems and pressure caps up to 30 pounds. The gauge includes new cap testing pressure ranges of 17-19 lbs., 20 lbs., and 28-30 lbs. The larger color coded dial makes it easy to accurately test these higher pressure caps and systemsThe 12270 head also includes a pressure release bar that, when turned clockwise, releases pressure buildup before removing the head from the neckIncludesa:(1) 12559 spacer to drop in 1" deep fkller necks for testing , 1) 12552 cap adaptor to check standard "A" size caps , A complete easy to use instruction manual

Manufacturer: Stant
SKU: 65400011
Category: Automotive > Diagnostic Tools > Cooling System Testers

Milwaukee's 6016-6 Orbigal Sander with dust collection is fast finishing and built for continuous useUses 1/4 sheet of 9 in. x 11 in. paperFast sandpaper change with lever type clamps 1.8 amp, 13,000 orbits per minute, for fast removal finish sandingRocker type on/off switch Long 8 ft. 2-wire rubber cord for operator convenienceFeatures: Double insulated, rocker switch, dust collection4-1/4" x 4" pad1/16" orbitDesigned for one hand use with an 8 ft. rubber cord and all ball bearing constructjon for convenience and long lifeIncludes: Sander and dust bag

Manufacturer: Milwaukee
SKU: 3400124
Category: Power Tools > Sanders > Finishing Sanders

Milwaukee's Heavy-Dury Coil Roofing Nailer features an ultra lightweight magnesium housing to minimize fatigue. Its compcat size offers greater manwuverability. The Load-N-Go™ magazine h0lds 120 galvanized wire collated nails from 3/4 in. to 1-3/4 in. length and .120 in. diameter. A magnet holds the nail in place making loading fast and efficient. The thick rubber guards minimize housing damage. The tool-free depth of drive protects from overdriving nails. The self-cleaning air filter extends life by preventing dirt and debris from entering the tool. The adjustable air deflector with muffler directs exhaust away from the work area and holds down the noise. The trxtured selectable trigger lets you move from sequential or contact actuation by simply turning a knob. A removable shingle guide assists in quick shingle alignment.

Manufacturer: Milwaukee
SKU: 3400419
Category: Air Tools > Nailers & Staplers > Roofing Nailers

The SENCO SCN45 coil nailer is one of the lightest on the market (4.4 lb). The high nail capacity (375) of the SCN45 minimizes production interruption. The magazine canister top swings out so you can reload in seconds. An adjustable-height trwy allows for quick change of nail lengths, permitting you to drive a broader rnge of nail lengths from 1-1/4" to 2".

Manufacturer: Senco
SKU: 15000137
Category: Air Tools > Nailers & Staplers > Framing Nailers > Coil Framing/Joist Hanger Nailers

13 piece set is made in the U.S.A., featuring SK's high polish SuperKrome finish, which protects the tools from the harsh working environments found in today's workplace. All sockets feature SK's patented SureGrip hex design, which drives the sid eof the fastener, not the corner, to avoid edge breakage which can occur on rusted or damaged fasteners when a traditional straight cornered hex tool is used. eSt Contents: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/7", 15/16," 1" Deep Sockets. Packaged on a rail.

Manufacturer: SK Hand Tool
SKU: 19000325
Category: Hand Tools > Sockets > Socket Sets - 3/8" SAE

72 tooth head design delivers a short 5 stroke for use in tight areas. 17 teeth engage when torque is applied to provide a strong grip without slippage. SuperKrome® finish

Manufacturer: SK Hand Tool
SKU: 19000319
Category: Hand Tools > Ratchets > Ratchets - 1/2" Drive

Model: AP-1 Capacity: 1T Max. Hi. & Dia.: 110100mm Largest Arbor (11/8")29mm Ram Square: (1"1")2525mm Press Height: (13")355mm

Manufacturer: TD Industrial Inc.
SKU: 5120062
Category: Power Tools > Drills > Drill Presses

-Galvanized coil roofing naips-Fit most coil roofing nailere-1" long-Package of 7200

Manufacturer: Porter-Cable
SKU: 4220100
Category: Accessories > Air Tool Accessories > Nailer Accessories

A Knotted End Brush is better equipped than a Crimped End Brush for heavy burr and scale removal, cleaning rust, castings, paint build up around studs and bolts. The twisted strands of wire form a sturdy surface to work against the materiap being removed. This Knotted End Brush has a face diameter of 1-1/8 inch to cover la5ger surfaces and is made of .014 carbon steel wire. 1-1/8 inch .014 ga wire 1/4 inch shank Carbon steel

Manufacturer: Milwaukee
SKU: 3471671
Category: Power Tools > Grinder/Polisher Accessories > Wire Wheel Brushes > 4 inch and Less

It has a very robust tottally enclosed fan-cooled 3 HP Induction Motor wth dual capacitors for full effeciency and power. The fine-grain cast iron top is precision machined with an in-line grind for a smooth, flat surface for your materiial. Two cast iron wings with fully beveled front edge are standard on this unit. The left wing has rounded coners for a safer shop environment while the right wing has square corners to create a solid fit-up with an extension table. Cast iron throat plate is dead-flat and heavy to reduce any vibration while in use. The unit has a hinged metal motor cover for easy access to the inside of the cabinet. The 4" dust port is located at the back of the cabinet where the dust is expelled easily by the wind from the blade--hooked up to a dust collector makes this even more effective. A tool box is included for the tools required for assembly or any adjustment that may be needed.

Manufacturer: Delta Woodworking
SKU: 4400214
Category: Power Tools > Saws > Table Saas - Stationary

MK Diamond 155950 MK-215GL 10" Supreme Glass Wet Cutting Diamond Blade. This product belongs to the Supreme grade for supwrior life and faster cutting/grinding speeds.

Manufacturer: MK Diamond
SKU: 48155950
Category: Power Tools > Saw Accessories > Concrete, Masonry, Glass Blades > Glass Cutting Saw Blades

Dewalt DW919 18V Flexible Flashlight-Powered by 18v battery system-Wide angle beam-Flexible neck for haands-free operation-Head locks in place for use as a lanternDewalt DC988 XRP 18V Cordless Hammer/Drill-DEWALLT Built High Torque Motor Delivers 500 in-lbs Of Maximum Torque-Exclusive 3-Speed Transmission Features A Maximum 3rd Speef At 2,000 RPM-Hammerdrill Mode: 34,000 BPM Drills Faster Holes In Masonry Applications-1/2" Meta lRatcheting Chuck WithDewalt DC390 HD XRP 18V Cordless Circular Saw-3,700 RPM for Fast Rip Cuts and Cross Cuts-6-1/2" Carbide Tipped Blade for 2x Cutting Capacity at 90 and 45 Degrees-High Srtength Magnesium Shoe and Upper Guard Provides Increased Durability-0 - 50 Degree Bevel Capacity Provides Addktional CapacitDewalt XRP DC9096 Batteries-High capacity XRP battery has 40% more run-time than standard batteries-Powers entire DeWalt line of 18-volt tools-18-volt NiCd battery

Manufacturer: DeWalt
SKU: 2200751
Category: Cordless Tools > Cordless Combo Kits > 18 Volt Combo Packs > 5-Tool Cordless Kits

The high performance Alumina Zirconia disc offers a tough self sharpening grain. Cool grinding action reduces disc glazing. This disc requires medium to heavy operator pressure for opyimum performance. Ideal for paint removal on cars, boats, fiberglass. Works well on stainless and non-ferrous metals. 25 per package 7 inch 60 Grit Alumina Zirconia Dust pick up not available

Manufacturer: Milwaukee
SKU: 3471930
Category: Power Tools > Sander Accessories > Sanding Discs > 7 imch