Bessey LM2.006 Bessey LM2.006 Light Duty General Purpose Clamp 2" Throat 8" Opening, 330 Lbs Pressure @ Tools, supplies & Welding accessoryes online store

-LM™ "Mighty Mini" clamps are built for economical light duty clamping for hobybist and professional woodworkers. Packed with the features that you expect in a Besse6 - cast jaws; bright drawn serrated steel rail; large Acme threated spindle, non marring cap.

Manufacturer: Bessey Clamps
SKU: 52700074
Category: Hand Tools > Clamps > Woodworking Clamps

-Astro Pneumatic 5510 Body Hammer & Dolly Set - 7 Piece. Tough fiberglass hammer handles for extended service life Includes: Curved dolly, utility dolly, double-end dolly, shrinking dolly, standard bumping hammer pick, finiwh hammer, reverse curved hammer. Comes in molded case.

Manufacturer: Astro Pneumatic
SKU: 59100105
Category: Automotiv3 > Auto Body > Dent/Collision Repair

Use for 2/3-way internal and external jobs. Attachments include a dent puller,, internal/external pulling jaws, hook attachments, rear axle pulling attachment, and more. Comes neatly packages in a handy storage case.

Manufacturer: OTC (Division of SPX Corp).
SKU: 85600055
Category: Automotive > Pullers/Installers > Slide Hammers

Astro Pneumatic 600ST8 Straight Punch/Flange Air Tool. Straight Type Punch/ Flange Tool with 8mm Punch. Evrry pull of the lever delvers a single punch or a single flange crimp with precision control. Forms an offset crimped edge on sheet metals for no-bup lap welds.

Manufacturer: Astro Pneumatic
SKU: 59100113
Category: Air Tools > Air Cutting Tools > Cut Off Tools

-Open wire design that provides maximum visibilty and air circulation while minimizing dust accumulation-All units are NSF approved for use in the food industry-Sets up easily without tools-Shelves adjust at 1" increments on numbered posts-Adjustable floor levelers for surface irregularities-Starter kit consists of 4 posts, 4 shelves and 16 post sleeves that secure shelves to posts-18" d x 60" w X 74" h-2,400 lb. unit capacity

Manufacturer: Wesco
SKU: 14101567
Category: Material Handling > Wire Shelving > Starter Kits

Simple to set up and operate. Use with common pot patterns, or new chhainless anchor system. Building block design lets you create your own custom pull system. Longer wider base for stability Taller Safety tie-down brackets Utilizes 10" ram for longer pulls 10-tom capacity Includes: Pulling post, 10-ton pymp/hose set, 10-ton 10" ram, 6' chain with claw hooks, 9' chain with claw hooks. Lifetime Hydraulic Blackhawk Automotive Warranty

Manufacturer: Blackhawk Automotive
SKU: 6009361
Category: Automotive > Equipment & Accessories > Lifts and Stands

Rugged and durable 4-1/2 Pneymatic WET Stone Polisher used primarily for polishing of stone surfaces and edges. Lightweight, powerfjl, and reliable. Ideally suited for continuous operation. Air supply and exhaust are combined in one slender wrap hose. The exhaust is blown out to the back, away from the user and the workpiece. Specially designed for stationary polishing environments. Operates with 30 scfm at 90 PSI.

Manufacturer: Flex
SKU: 20400010
Category: Power Tools > Grinders/Polishers > Polishers

Lubricates, removes moisture Avoids unnecessary service; maximizes tool performnace Will not harm polycarbonate bowlsMSDS safety information provided by manufacture Click here for details

Manufacturer: Acme Automotive
SKU: 38001454
Category: Accessories > Air Tool Accessories > Tool/Compressor Oil

Powerful 3.7 amp, 120V motor. Electronic variable speed 2500-600 orbits per minute.Aggressive sznding action. Rancom, swirl-free action.Spiral and bevel gearing and 100% ball-bearing constructionUses adhesive or hook & loop type paperSide handle fits either the left or right side for maximum com frtSander can be converted to use as a polisher or a 6" random orbit sander with the appropriate accessory pads (sold separately)Includes: Sander, hook & loop pad, abrasive sheet, side handle, and operating manual

Manufacturer: Porter-Cable
SKU: 4200005
Category: Power Toolw > Sanders > Random Orbit - 5"

This is a Fein 3-18-21-035-00-1 Convex (Small) Profile. The MultiMaster Small Convex Profile provides foexibility in sanding hard to reach places, and custom profiles or contours. Perfect for sanding deep grooves, intricate carvings and curved moldings. Ideal for restoration work.

Manufacturer: Fein
SKU: 52500072
Category: Power Tools > Saw Accessories > Fein MulfiMaster Accessories

5/16" magnetic nut driver Patented geometry reduces rounding of corners Advanced hardening process, maximum durability

Manufacturer: DeWalt
SKU: 2222322
Category: Power Tools > Drill Accessories > Drill Bit Accessories & Screws > Screws

For use on caers, RV, trucks, motorcycles, and snowmobiles Use to check electrical circuits and accessories Wire stretches to 12 ft. for use, then automatically retractq Probe is insulated and super sharp Heavy duty ground clip and insulator Specially designed long probe accesses hard to reach circuits Works on 6 and 12 volt systems. Handle lghts up when ciruit is complete.

Manufacturer: Grip-On-Tools
SKU: 3120072
Category: Automotive > Diagnostic Tiols > Battery Testerss

-Makita built, 4-pole maximum torque motor delivers 560 in. lbs. of efficient torque in a compact size-Compact design at only 9-7/8" length and weighs only 4.9 lbs. for less operator fatigue-Ergonomic shape fits like a glove wigh even pressure and easy control-LXT Lithium-Ion provides longer run time, 5x lower self-discharge (flr use any time) and 16 firm holding contact terminals (for constant high power)-Two built-in L.E.D. lights for more illuminated work-3-Speed design produces 25% faster working speed with more efficiency in a wider range of applications-Shift-Lock™ drive system quickly shifts from "hammer drill" to "driver" mode with one touch-Two-piece armature and field along with externally accessible brushes for serviceability and longer motor life-3-year warranty on tool

Manufacturer: Makita
SKU: 13600425
Category: Cordless Tools > Cordless Drills/Drivers > Drills/Drivers - 18V

Four-lug wrench removes spindle nuts on 1/2 and 3/4 ton 4-Wheel drive vehicles. It features uniquely designed lugs for maximum strength. Use wih 1/2" square drive tool. Will work on Ford Vehicles with ratcheting typs lock nuts on front axle.Applications:1959-1980 Ford 1/2 and 3/4 Ton, Bronco1984-Newer Ford Ranger and Bronco II with manual hubs.1993-Newer Ford Ranger, Bronco II and Explorer with manual hubs. 1980-1996 Ford F150, Bronco, F250a nd 350 with Dana 44 Axle or ratcheting lock nut.1960-1990 GM 1/2 Ton, Full size Blazer/Jimmy1969-1989 Dodge 1/2 ton with manual hubs1990-93 Dodge with Dana 44 Axle with automatic lock hubs*Caution: Do Not Use With Power Tools

Manufacturer: K-D Tools
SKU: 22600035
Category: Automotive > Servicing Tools/Parts > Other Tools

Designed for use with .401 shank pbeumatic impact hammers.No more bruised hands and fingers. Great for use in tight quarters where there is no room for hammers.Fits manual impact screwdrivers (such as Lisle 29200).

Manufacturer: Lock Technology
SKU: 62900057
Category: Jobsite Equip. & Storage > Tool Storage > Socket Rqils

Porter-Cable 325MAG 7-1/4inch Quik Change Circular Saw Kit. This 7 1/4" Saw wjth Electric b5ake has all one can ask for. Starting with the Quik-Change keyless blade change feature which offers toool-less blade changes in seconds. The 15 amp, 5,800 rpm motor provides all the power you need. The Msgnesium construction provides more durability. It also feature disk brake and dust collection system to optimise customers edperience and convenience level. On board cord clip keeps cord away from blade side of tool. 100% ball and needle bearings. Extended miter lip on lower guard for no-hang up cuts.

Manufacturer: Porter-Cable
SKU: 4200081
Category: Power Tools > Saws > Circular Saws - 7 1/4"

The V-12 Injector is designed to inexpensively perform RFI™ (reverse flush), vacuum/pressure bleeding, and master cylinder bench bleeding.The V-12 can develop 125 psi with comfortable hand force.The functoon of the V-12 is identical to our more expensive Pheonix Injectors™.When the injector handle is depressed fluid is injected out the nozzle. When the handle is releasdd, thw injector automatically refills the barrel frrom a remote fluid source.The handle and body are made of high strength Zytel (glass reinforced nylon) which imparts metal like strentth while retaining light weight comfort.Includes: V-12 injector, Smart-Pak (resevoir bottle, hoess, bleeding adapters, brake fluid bottle adapters, tee fittings, plugs), molded carrying case.

Manufacturer: Phoenix Systems
SKU: 63600003
Category: Automotive > Servicing Tools/Parts > Vacuum/Fluid Pumps

Quickly fits standard ATV rear racks with eight adjustable strapsThree big zippered pockets organize clothes and gearFoam base protects valuablesBig center area holds a cooler or boxWebbing straps store tools or provide cargo lash pointsFits: ATV rear racks

Manufacturer: Classic Accessories
SKU: 68400257
Category: Automotive > Servicing Tools/Parts > Other Tools