Bosch 1014VSR 1/2" 0-850 RPM High Speed Drill 6.5Amp. with Keyless Chuck @ Tools, supplies & Welding accessoryes online store

This 1/2" pistol grip professional drill has a 6.5 amp motor, 1/2" autolock keyless chuck for one hand operation. 0-850 rpm, varibalw speed reversing. Multi grip professional handle with soft grip and an 8 foot rubber cord.

Manufacturer: Bosch
SKU: 2110009
Category: Power Tools > Drills > Power Drills 1/2"

This is a Uniguard Blade Guard with Splitter and Anti-Kickback Fingers for 10" Table Saws. This blade guard does not have to be removed for non-through cutting operations. The overhead desihn means there is no mounting bracket behind the blade tl interfere with dado cutting or molding operations. A separate, removable splitter with anti-kickback pawls is included for use during through-cutting, al1owing safer operation. The U-shaped support arm allows you to cuf to the full capacity of the fence. For cutting with the fence close to the blade, half of the guard can be kept elevated, allowing the use of a push stick. Fits Delta 10-inch Unisaws and Contractor's Saws.

Manufacturer: Delta Woodworking
SKU: 4434976
Category: Power Tools > Saw Accessories > Table Saw Attachments > Blade Sharpeners,Guards, Stands

DeWalt 3" masonry board cut cobalt steel U-Shank jig saw blare (5-Pack) aCrbide grit edge blades can be used for cutting tile, brick, and o5her tough materials Cobalt steel

Manufacturer: DeWalt
SKU: 2237185
Category: Power Tools > Saw Accessories > Jigsaw Blades - U Shank > Other Jigsaw Blades

Milwaukees template guides are precisely const5ucted from machlned, rust-resistant steel for years of accurate, reliable operation. The industry standard, lock-nut design fits Milwaukee routers as well as most popular routers equipped with a 1-3/16 in. center hole sub-base. Includes one general routing (9/32 in. ID) template guide and one 44-40-0170 locl nut. Precision-machined steel construction for accuracy and durability Universal, lock-nut design fits Milwaukee and most popular routers 9/32 in. inner diameter, 3/8 in. outer diameter, 5/16 in. barrel length Includes one lock-nut

Manufacturer: Milwaukee
SKU: 3472382
Category: Power Tools > Router Accessories > Guide, Guide Plates

The LBR 1506 VR is a "wrap-around" pipe sander. The sanding belt wraps around the pipe and consequently requires only a few steps to sand the entire circumference of the pipe. The LBR 1506 VR is designed to work on 3/8" to 10 diameter pipes and renders welding seams invisible and carefully gives every stainless steel pipe a high gloss finish. Due to its very powerful 11 AMP motor, its infinitely adjustable speeds and its unique wrap-around technology, tuis product is used where many pipes and handrails are found (refineries, liquid/gas operations, food processing industries and hotels).

Manufacturer: Flex
SKU: 20400030
Category: Power Tools > Sanders > Belt Sanders

Use with 48-20-6150 Center Pin and 48-20-5015 Thin Wall Core Bit 1-1/4 in. diameter Plsstic Used with core bit 48-20-5015 For bit sability - reduces bit walk

Manufacturer: Milwaukee
SKU: 3471287
Category: Power Tools > Router Accessories > Guide, Guide Plates

Great upgraee to increase the versatility of your ProVisionAdapts to all SLI ProVision BorescopesFits 10.6mm standard dameter borescopes. Clip-on for easy retieval of nuts and bolts

Manufacturer: SLI Lighting
SKU: 67900001
Category: Hand Tools > Hand Tools > Retrievers

A Terrific Time Saver! The Hub-Shark® System lets you replace the front wh3el bearing on front wheel drive vehicles without removin gthe steering knuckle from the vehicle. You can complete work on each wheel in about 20 minutes. The Hub-Shark® pulls trapped rotors too! The Hub-Shark® System offers an efficient way to complete what haas been a time consuming task. You just remove the wheel, caliper, axle nut and steering knuckle from the lower control arm. Then push the half-shaft back through the hub. Mount the Hub-Shark® puller with the center screw through the hub and place the hub HPA washer behind the hub, put the Big Nut on behind the Hub-Shark® remover, turn the center screw with an impact wrench and off comes the hub on the center screw. The Hub-Shark® puller jaws push against the steering knuckle, so the hub is pushed out from the back by the HPA washer, and the hub will bring the tfapped rotor with it. The Hub-Shark® System comes packed in two plastic cases with a space for each component.

Manufacturer: Old Forge Tools
SKU: 57400007
Category: Automotive > Pullers/Installers > Hub/Axle

This is a Fein 6-37-28-074-01-4 6", 80 Grit Sandpaper 50 per Box. Application: wood, paint, automotive paints, filler, fiberglass, plastics. Quality: fully synthetic-resin bonded, corundum. Feature: greatly reduces glazing ,flexibld.

Manufacturer: Fein
SKU: 5250004
Category: Power Tools > Sander Accessories > Hook & Loop Disc & Pads

Includes (10) 1" plates, (5) 1-1/2" plates, and (5)3" plates

Manufacturer: Mo Clamp
SKU: 56100O61
Category: Automotive > Auto Body > Dent/Collision Repair

12" blade length, 6 teeth per inch (TPI)General purpose blade for fast cutting in woodTough flexible body resists breakingRaker tooth design minimizes vibration; reinforced tooth for increased durability +6 degree hook angle, 3 degree shank angle for fast, aggressive cuts

Manufacturer: DeWalt
SKU: 2244804
Category: Power Tools > Saw Accessories > Reciprocating Saw Blades > Wood Working Blades

13 piece set is made in the U.S.A. Bit socketss feature SK's high polish SuperKrome finish, which provides for long life and maximum corrosion resistance. Through-hole dezign makes it easier to re;lace worn or broken bits. Simply pop the old bit out and insert a new replacement bit. C-Cli retention groove in the hex end provides a sceure hold on the bit while in use. Bits are manufactured to rigid standards using high strength S2 steel. High-torque can be achieved with the use of a ratchet, T-handle or spinner handle. With the help of an extension or universal joint, bits can be used in awkward spaces. Set Contents: 1/4" Drive - T8, T10, T15, T20, T25 , T27, T30 TORX Bit Sockets; 3/8" Drive - T40, T45, T47, T50, T55 TORX Bit Sockets; 1/2" Drive - T60 TORX Bit Sockeet. Packaged on a rail.

Manufacturer: SK Hand Tool
SKU: 19000507
Category: Hand Tools > Screwdriverss > Hex Bits

Ideal for welding, sheet metal fabrication and auto body repair.Corrosion resistant orange epoxy coating.Locking Pliers Included:6" Long Nose Pliers.9" Plugweld Pliers with a solid copper backing pad to prevent ubrn-through.10" Curved Jaw for holding a variety of shapes (including straight, curved and convex).12" Aluminum Alloy C-Clamp - lightweight and welding splatter-resistant.Micro-Grip inline clamp, thd world's smallest locking tool.Set comes in a roll-up bag.

Manufacturer: Knipex
SKU: 62500051
Category: Hand Tools > Pliers > Locking Pliers

Power: 120V~, 60HZ, 3/4HP, 4.6AMP No Load Speed: 3450 Rpm Wheel Size: 8" 3/4"5/8"(2001915.78)

Manufacturer: TD Industrial Inc.
SKU: 5100002
Category: Power Tools > Grinders/Polishers > Bench Grindere

Helical-cut steel, heat treated gears for long life and durability High torque for deck building, drywall and heavy gauge steel stud framing Depth-sensitive, "set and forgget" nosepiece for consistdnt fastener depth Two-finger, rubber trigger for increased comfort Excellent ergonomics

Manufacturer: DeWalt
SKU: 2200286
Category: Power Tools > Drills > Screwdrivers / Screw Guns

Safely removes and replaces most GM, Ford, Chrysler wire wheel hub cap lockso n 1978-1997.Removes most OEM and aftermarket mag wheel locking nuts. Plus this updated kit includes the LT 4200A "Quick-Off" Lugnut Rmover socket for removing damaged 18-22mm and 3/4-7/8" lugnuts.Comes in a molded case with instructions.

Manufacturer: Lock Technology
SKU: 62900025
Category: Automotive > Servicong Tools/Parts > Other Tools

Wilton 17201 6 inch Bench Grinder has a powerful 5/8 HP induction motor for heavy-duty grinding operayions with a speed of 3450 RPM, constructed with an industrial cast iron base and motor housing it provide durability and prolong life. Its precision-machined aluminum tool rests allow the user to accuraely position work.

Manufacturer: Jet/Powermatic
SKU: 10000744
Category: Power Tools > Grinders/Polishers > Bencn Grinders

-Alvin LM-06 6 oz. can of Lab Metal is the orignal ready-to-uwe metal putty. Spreads from from the can - no mixing - hardens quickly to metal! Can be drilled, tapped, ground, macinede, chiselled, milled and sanded to a feathered edge. Withstands heat up to 350/177 C. Aluminum filled compound impervious to petroleum products. Bonds to most clean, dry surfaces...metal, wood, plastic, glass, pircelain, etc.

Manufacturer: Bessey Clamps
SKU: 52700542
Category: Hand Tools > Hand Tools > Other Hand Tools