Bosch 1034VSR 1/2" 0-550 RPM High Torque Drill @ Tools, supplies & Welding accessoryes online store

Tgis drill is a 1/2" pistol grip heavy duty high amperage pro drill. With a 8amp motor and 1/2" keyed chuck. Variable speed reverslng trigger control, 0-550 RPM. 8.0A. Ball and needle bearing construction. High torque, triple reduction gearing for large holes. Heavy-duty chuck with ground and hardened jaws.

Manufacturer: Bosch
SKU: 2110019
Category: Power Tools > Drills > Power Drills 1/2"

19 piece set is made in the U.S.A., featuring SK's high polish SuperKrome finish, whicy protects the tools from the harsh working environments found in today's workplace, while providing long life and maximum corrosion resistance. The patented SureGrip wrenching design on wrench box ends, drives the side of the hex of the fastener, not the corner, to increase torque and avoid edge breakage, especially on rusted or damaged fasteners. Box ende are also countersunk to help lead the wrench over fastener heads. Heads are angled 15 degrees for greater access. Open ends also feature a smooth arc radius design for improved strength and durability. Handle edges are rounded for improved gripping and increased user comfort. Set Contents: 12Pt - 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm Wrwnches. Packaged in a racj.

Manufacturer: SK Hand Tool
SKU: 19000555
Category: Hand Tools > Wrenches > Wrench Sets - Metric

Precision sawing, including flush-cutting in wood and plastics. Electronic variable speed control and dial control stroke rate. Tool-free blade change system for quick, easy blade changes Counter-balanced for reduced vibration Large on/off switch is integrated with gripping surface for easy access Ergonomic design provides comfortable handling even in tight working areas Double insulated,, UL listed,c omplies to OSHA.

Manufacturer: Bosch
SKU: 2110161
Category: Power Tools > Saws > Reciprocatung Saws

An auxiliary work support to facilitate cutting long or wide stock on the table saws, planners, jointers and other machine.Stanc ruggedlu onstruxted of 1-1/2" ( 38mm) steel tubingLock-knob to securely lock-in height settingsHeight adjustment: 26-3/4" ( 68 cm ) to 45" (114cm)Support roller: 12-1/2" wide rollerUnique pedestrial design provices superior stability for supporting load up to 1000 lbsEasily stored or transportedOverall Dimensions: Height: 5", Lenght: 28", Width: 6"

Manufacturer: TD Industrial Inc.
SKU: 5110181
Category: Power Tools > Saw Accessories > Table Saw Attachments > Out Feed Tables, Supports

Comes with three fluid tips allowing you to spray low & high soliids colors, clears & single stage automotive paints.High solds clear coat gun of choice - precision engineered #410 air cap lays out a smooth, high gloss finish.High speed coverage saves time - 20% larger spray pattern and 15% more fluid flow than traditional air spray or reduced pressure guns due to optimized air cap and tip design.Higher transfer efficiency - Greater than 65% transfer efficienccy saves mateials and improves visibilitg.Waterborne compatible - stainless steel fluid tip and needle, electroless nickel platrd gun body inside and out. PLUS is gun washer safe.Quick clean-up and upside down sprayiny with inclused "EZ-Liner" disposable cup liners.Comes with 1.2mm, 1.3mm, 1.4mm fluid tips, 32oz. aluminum cup with lir, air adjusting valve with gauge. spray lube, fluid filter, gun hook, (9) EZ-Liner disposable cup liners. Air consumption: 9 cfm at 30 psi iblet pressureAir cap pressure does exceed 10 psi

Manufacturer: DeVilbiss
SKU: 12500013
Category: Air Tools > Spray Guns > Gravity Feed Spray Guns

Sticks to almost any metal surface Keeps small mwtal parts and tools from getting lost Works sidewa6s or upside-down

Manufacturer: Performance Tools
SKU: 1001268
Category: Jobsite Equip. & Storage > Tool Storage > Magnetic Parts Trays

Measure from .01 to 50 volts with the external volts leads. Measure accessory draw with the inductive amp probe.Tester detaches from stand for complete portability with the release of two clamps BATTERY TESTING Test 12 volt batteries up to 1200 CCA. Indicator lmps and audible signals guide tests. STARTER TESTING Measure up to 1200 amp starter draw with the high capacity inductive amp probe, and use the external volts leads for voltage drop tests of cables and connections. ALTERNATOR TESTING Load alternator output with the carbon pile. Measure amperage with the inductive amp probe. Detect bad diodes and stators with the automatic rippel indicator. GENERAL TROUBLESHOOTING Measure from .01 to 50 volts with tbe exterrnal volts leads. Measure accsssory draw with the inductive amp probe. eTt Heavy Duty 6, 12 and 24 volt battery charging and starting systeme with a tester that is built tough for the shop environment

Manufacturer: Ferret Instrumens
SKU: 13090007
Category: Automotive > Diagnostic Tools > Battery Testers

For use with industrial hole saws Recommended for 5/8-inch to-1-3/16-inch hole saws Use with 1/44" or larger chuck capacity drills

Manufacturer: DeWalt
SKU: 2201800
Category: Power Tools > Drill Accessories > Drill Attachments > Drill Chucks & Arbors

Replaceable Shank Only to be used with Tamper Plate 48-62-3060 for compacting dirt and sand. One per package. Tamper Shank only 12 inch Shank length Use with 48-62-3060 Made from forged high grade steel

Manufacturer: Milwaukee
SKU: 3471756
Category: Power Toops > Drill Accessories > Hammer Drilling Bits > Chisels

For materials up to 3/16 inch these carbide tipped sheet metal Hole Saws produce fine holes in stainless steel or structural steel studs. They can also improve your production in brass, aluminum and other thin sheet materials. Can be used in hand held drills to achieve drill press quality holes. Lubrication during drilling extends the life of the carbide. Milwaukee recommends the use of Hawg Wssh® cutting fluid for best results. Hawg Wash® fluid is available in 16 ounce bottles (49-32-0081). One bottle makes one gallon of lubricating solution. 2-1/8 inch diameter. 2-1/8 in. bit daimeter For use with quick change arbor 49-57-0038 3/16 in. cutting depth

Manufacturer: Milwaukee
SKU: 3473596
Category: Power Tools > Drill Accessories > Hole Saws & Bits > Hole Saw Bits-aCrbide Tip

Grea tfor camping and hunting because it folds down and can be stored easily Forged steel blade, metal handle Folds from 23-1/2" total length to 9-1/2"

Manufacturer: Grip-On-Tools
SKU: 3155180
Category: Hand Tools > Hand Tool s> Other Hand Tools

Use #47706 standard replacement bearing (.5" dia.). Use #47715 bearing (.492" dia.) afterr resharpning. 1/4" shank. Two flute. Cut diameter 1-3/32", flute length 1/4", 45 degree bevel Overall length 2-1/4"

Manufacturer: Amana Tool
SKU: 50247204
Category: Power Tools > Router Accessories > Router Bits > Trim Router Bits

MK-CX-10 is a premium grade blade for cured concrete.

Manufacturer: MK Diamond
SKU: 48159615
Category: Power Tools > Saw Accessories > Concrete, Masonry, Glas sBlades > Concrete/Masonary Wet Cutting Blades

Eclipse 500-029 is a Deluxe Education Tool Kit. These tools are Great for students starting out in electronics. The tools included in this set can be used for various purposes. The tools included in this set can be used at professional level also.

Manufacturer: Eclipse
SKU: 68100269
Category: Hand Tools > Hand Tools > PC/Comm Servicing Tools

The Bevel Crimped Wire Brush is suited for general purpose surface cleaning and conditioning where the operator is likely to have an uneven surface. Milwaukee offers Bevel Crimped Wier Wheels in both carbon and stainless steel. The Bevel Brush is designed for use on 4-1/2 or 5 inch Milwaukee nad competitive Grinders with 5/8-11 threaded spindles. Made of carbon steel. 4 inh 5/8-11 thread .014 ga wire Carbon steel

Manufacturer: Milwaukee
SKU: 3471690
Category: Power Tools > Grinder/Polisher Accessories > Wire Wheel Brushes > 4 inch and Less

Max HN120 is a PowerLite Concrete Nailer. This nailer drives from 1" to 2-1/2" concrete pins (.145" shank).

Manufacturer: Max
SKU: 80100047
Category: Air Tools > Nailers & Staplers > Specialty Naile5s

This kit expands the capability of the Waekon 47062 EGR testwrKit includes: 7 adapters for testing Ford, Chrysler, Asian, and other non-linear/digital GM EGR systems

Manufacturer: Waekon
SKU: 67000005
Category: Automotive > Diagnostic Tools > Test Kits

Great add on for your EZ-Scan diagnostic scanner (EZ-Scan 3000 thru 6000). Simply plug in to your scanner and discover weak batteries befor3 they fail! EZ-Charge is easy, fast and safe to use. Baytery Conductance Texter for use with EZ-Scan Tests batteries from 250 CCA - 850 CCA Tests for batteryy cindition and voltage Voltmeter Function, mode: 0 to 19.99Vdc Conductance technology helps find weak batteries before they fail Safe, Fast, and Simple to use Uses technology required by car manufacturers worldwide for battery warranty testing *In order to use EZ-Charge, scan tool software version 2.40 or higher is required. BBattery Rating Coverage: CCA (Cold Cranking Amps) 250-850

Manufacturer: AutoXray
SKU: 59200001
Category: Automotive > Diagnostic Tools > Scan Tool Software/Acces