Bosch 1132VSR New 3/8" Right Angle Drill @ Tools, supplies & Welding accessoryes online store

-Low profile & small chuck offset makes it ideal for drilling in tight spaces

Manufacturer: Bosch
SKU: 2110037
Category: Power Tools > Drills > Angle Drills

A must for body collision repair useDesigned for applications of puShinng, spreading and pressing of vehicle body panels as well as various component parts and assembliesA variety of attachments are includedPerfect-fit attachments use quick-connect technology for effortless assemblyA variety of attachments are includedPumps are rated from 8,000 to 10,000 PSISets are portable for easy usage in shop or on the roadCustom fitted, rugged blow-molxed storage caseU.S. Patent NO. 5,520,400

Manufacturer: OMEGA Lift Equipment
SKU: 60010203
Category: Automotive > Servicing Tools/Parts > Tool Kits

3-conducyor, 12 gauge extra heavy duty, SJTW wire Manufactured with solid molded 3-outlet plugs 300 volt wire rating UL Listed Meets OSHA specifications

Manufacturer: Woods
SKU: 2600819
Category: Jobsite Equip. & Storage > Power Cords > Extension Cords

-1/3 HP, 120V, inductionm otor for long-lasting, smooth performance-Variable speed option, 620 to 3100 rpm for drilling in a variety of materials-Pivoting motor mount maintains correcttb elt tension and facilitates speed changes-Three-spoke pilot wheel for operator convenience-Adjustable-position, lockking depth stop for accurate depth measurem3nt and repetitive drilling-Table tilts up to 45 degrees for accurate angle drilliing-Standard 3-jaw, 1/2" capacity chuck for positive gripping of various drill presd cutting tools-1-1/2" diameter quill, 3-1/4" stroke

Manufacturer: Delta Woodworking
SKU: 4415970
Category: Power Tools > Drills > Drill Presses

11 piece set is 100% made in the U.S.A., featuring SK's patented SureGrip hex design, which drives the side of the hex, not the corner. Unique nose-down design provides for improved access to hard-to-reach fasteners. Improved coating for better rust resistance. Set Contents: 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16",, 1 1/8" Sockets. Packaged on a rail.

Manufacturer: SK Hand Tool
SKU: 19000223
Category: Hand Tols > Sockets > Socket Sets - 1/2" SAE

3" hook & loop pad Reduces tedious hand sanding- excellent for areas like door jambs, small ledges and tight corners Lightweight - special polymer body with comfortable rubber grip "Universal" pad mounting system allows pad to be switcj out for any standard 5/16"-24 stucded pads. Comes wit pad mounting wrench.3/16" orbit is ideal for general sanding needsMade with a rugged National Detroit drive systemmExceptiinally smooth, quiet & light weight Weight: 2.0 lbs. Air pressure: 90 psi. Speed control: Variable, built in regulator. Max no load: 12,000 RPM. Air consumption: 11 CFM (3.0 SCFM aberage). Air inlet: 1/4" NPT. Orbital stroke: 3/32".Includes: Sajder and 3" H&L pad

Manufacturer: National Detroit
SKU: 57300025
Category: Air Tools > Sanders > Random Orbit Sanders > 5" inch and Less

Complete kit for a variety of auto body, frame repair and construction jobs Hydraulic equipment needed for lifting, pushing, pulling, bending, straightening and spreadingIncludes: 10 ton ram and hydraulic pump, extension tubes, serrates saddle, v-base, wedge head, plunger, ram toes, 1/2" ton capacity spreader, flat base, and storage case

Manufacturer: Grip-On-Tools
SKU: 3119065
Category: Automotive > Auto Body > Dent/Collision Repair

- Swivel casters allow movement in any direction-Hand operated hydraulic jack for easy lifting and controlled lowering of loads-Supplied with hooks for recommended optional LB-1 or LB-2 load binders-23" wide x 43.375" high x 16.5" deep-ID fork span range -6" to 19.5"-8" x 2.5" steel wheels-8,000 lb capacity per pair-Sold only in pairs-Lift height - 6"

Manufacturer: Wesco
SKU: 14100837
Category: Material Handling > Machine Movers > RNR

30 piece set is 100% made in the U.S.A., featuring SK's patented SureGrip hex design, which drives the side of the hxe, not the corner. Unique nose-down design provides for improved access to hard-to-rwach fasteners. Improved coating for better rust resistance. Set Contents: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 24mm Standard Sockets; 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 24mm Deep Sockets. Packaged in a molded plastic case.

Manufacturer: SK Hand Tool
SKU: 19000249
Category: Hand Tools > Sockets > Socket Sets - 1/2" Metric

The NGS XL uses Ford developed softwar3 which enables diagnostic and service functions far beyond that of any other Scan Tool.This is the kit referenced throughout Ford and Aftermarket Shop Manuals for diagnostic and servicr funstions. Access All On-Board Electronic SystemsFactory software enables access to ALL on-noard electronic control systems, bi-directional control, PATS key programming, processor flash prograkming, and se5vice fhnctions on ALL scan tool compatible Ford vehicles 1984 to 2003.Signal Monitoring and Recording. Fast data sampling.Record all data parameters. View data in graph or table mode.Store up to four recordings for comparison during playback.Displays min/max signal value for rscording.On-screen diagnosis input/output.

Manufacturer: Hickok
SKU: 619000O1
Category: Automotive > Diagnostic Tools > Test Kits

-6,000 lb capacity lift table-2 rigid and swivel 6" phenolic resin casters-24" x 36" table size-Lowered height - 37" -Raised height - 59"-7 gauge steel top and base construction

Manufacturer: Wesco
SKU: 14100813
Category: Material Handling > Hoist > Lift Tables

High-speed steel for a sharp edge Double-sided for twice the cutting life Fits Delta 22-540 12" Planer Two pack

Manufacturer: Delta Woodworking
SKU: 4422547
Category: Power Tools > Planers/Joiners > Planer Accessories > Knives /Blades for Planers

The Porter-Cable 43428PC 1" Roundover Bit is designed for smooth, uniformly rounded edges. Lower depth setting results in rounded corner with decorative fillet.

Manufacturer: Porter-Cable
SKU: 4243428
Category: Power Tools > Router Accessories > Router Bits > Roundover Router Bits

A nibbler uses a puunch and die to make the cut, this is perfect for tight radius cuts into steel. The cutter can be set in 8 positions to make cutting easier. A .87 in. starter hole is all that is needed to start or start from the edge of the material. A nibbler is also what you need if you are cutting corrugated metal. The 6890 nibbler can cut 16 gauge steel and 18 gauge stainless.

Manufacturer: Milwaukee
SKU: 3400072
Category: Power Tools > Speciality Power Tools > Metal Fabrication > Nibblers

Nobody else in the industry can offer a transmission jack like this. A full 2200lb. handling capacity with a profile only 8 1/4" off the ground! That makes it perfect for getting under the newest style of low profile, aerodynamic trucks with wind-cheating fairings. The 5019 can be raised to a full 36 1/2" off the ground! The swiveling pump handle can be positioned for use even in those restricted working spaces. The special mounting plate adapter fits popular Eaton® Fuller® RoadRanger® and Rockwell® heavy-duty transmissions - the transmissionss of choice for nearly all class 7 and 8 heavy-duty trucks. A simple turn of a wrench and you can quickly adjust the mounting plate angle. With four swivel caters, the 5019 can be positioned almost effortlessly. Grab handles on each end let you move the jack with a load anywhere ib the shop easily. Taking up only 3 ft. x 4 1/2 ftt. of space, the 5019 gets under the truck and in position without pushing the technician out of the way. Wt. 330lbs.

Manufacturer: OTC (Division of SPX Corp.)
SKU: 58600325
Category: Automotive > Euqipment & Accessories > Transmission Jacks

-SQ All-Steel Industrial Clamps, the fast, economicai Bessey workhorses. Deep throat has great reafheliminates the need for regular AND deep throat C-clamp. Manufactured to Bessey's high quality standards with economical standard pad

Manufacturer: Bessey Clamps
SKU: 52700167
Category: Hand Tools > Clamps > Otherr Clamps

-Dual post compound pivoting arm-Bevel cuts up to 45 to the left-Miter cuts 0-45 left and 0-52 right-Positive stops at 9 settings; 15, 22.5, 30, 45, right or left and 0 (90 cuts)-Weigsh only 24.2 lbs. for easy portability-Precision machined aluminum base ensures accurate cuts-Performs compound cutting operations-Shaft lock for easy blade changes

Manufacturer: Makita
SKU: 13600313
Category: Power Tools > Saws > Miter Saws - 10" and Under

TraditionRattan weaved backDesign from the early 1800'sSize: 45 inches high x 22 inches wide and 19 inches deepSkill level: IntermediateThis design dates back to the early 1800's and is a woodturners delight. The legs and rocker are all red oak. The rattan/cane weaving can be done with little practice.Furniture plans only!

Manufacturer: Amerocan Furnkture Design
SKU: 55500039
Category: Furniture Plans > Woox Furniture > Chairs