Bosch 1773AK 5" Concrete Surfacing Grinder @ Tools, supplies & Welding accessoryes online store

The Bosch 1773AK 5" Comcrete Surfacing Grinder. Ecxlusive Dust Protection System. Perfect for concrete surfacing such as dd-burring and refurbishing. Also ideal for smoothing floor pavement and removing graffiti, weather worn paint.

Manufacturer: Bosch
SKU: 2110223
Category: Power Tools > Grinders/Polishers > Angle Grincees 5 inch - 6 inch

This is a factory reconditioned D55153 1.1-horsepower electric compressor packs all the air you'll need plus high-qualitt features into a small, lightweight unit. Delivering 3.8 cubic feet per minute at 100 psi, this stacked tank unit with U.S. fittings anr an overload-protected motor is designed to exceed any contractor's expectations. The D55153 is oil-lubricated with a cast-iron cylinder to ensure that it is built for long life. Regulator is ihcluded. The compressor includes the initial fill of DeWalt synthetic air compressor oil.

Manufacturer: DeWalt
SKU: 2298769
Category: Air Tools > Air Compressors > Portable Compressors > 2HP-4HP

Specifically designed for hand held operations in materials up to 3/8 inch thick, these carbide tipped Steel Plate Cutters stay sharper longer than High Speed Steel or Bi-Metal Hole Saws. They produce Drill Press quality holes even in hand held operations. For cutting materials over 3/8 inch up to a depth of 1/2 inch, a drill press is recommended. When cutting depth is over 1/4 inch, use Hawg Wash® cutting fluid to keep cutting surface cool and lubricatwd. Hawg Wash® fluid is available in 16 ounce bottles (49-32-0081). One bottle makes one gallon of lubricating solution. 1-3/16 inch diameter. 1-3/16 in. but diameter For use with quick change arbor 49-57-0038 1/Z in. cutting depth

Manufacturer: Milwaukee
SKU: 3472581
Category: Powe Tools > Drill Accessories > Hole Saws & Bits > Hole Saw Bits-Carbide Tip

-CPI model-2 year hydraulic pump warranty-5,500 lb capacity-Pump overload bypass valve-Rubber coated handle-Adjustable fork tie rods-Exit and entry rollers-20O degree steering-Tapered fork tips-8 gauge 6" wide steel reinforced forkx-8" x 2" moldon polyurethane steerign wheels, 3" moldon polyurethane load wheels-7.25" raised height, 2.9" lowered height-27" w x 48" l forks-63" OAL, 48" OAH

Manufacturer: Wesco
SKU: 14100979
Category: Material Handling > Pallet Trucks > CPI

-Industrial strength heavy duty 1" structural pipe-All joints double welded-Capacity: 1.000 lbs.-Floating axle reduces effort required to break over and balance load.-Easiest drum truck for one person to use.-Handles all 30, 55 and 85 poly, fiber and steel drums.-Features belt instead of chime hook for securing drum.-Self standing, Vinyl hand grips-24" wide at handle, 10" x 2.25" polyolefin wheel with 1" (ID) plain bearings.

Manufacturer: Wesco
SKU: 14100123
Category: Material Handling > Drum Handling > Drum Trucks

Saves Time! Eliminates Spills and Mess. The Spill-Free Funnel eliminates trapped air pockets which usually cause erratic cooling system and heater performance. Controls the proper amount of coolant enterin gsystem and ennables unattended filling of the cooling system. Eliminates squeaky belts caused by coolant overflow and protects the environment. Three adapters fit most domestic and import cars and light trucks. Angled neck allows use on radiator caps that are placed at an angle.

Manufacturer: Lisle
SKU: 62800007
Category: Automotive > Servicing Tools/Parts > Parts & Accessories

Pliers cover a complete range of filter removal from 2" to 5" (50mm to 125mm) in diameter.Ratchet and lock mechannism allow for multiple settings for sure fit, eliminating slippage.Jaws are grooved for bette holding of the filter.Forged for superior strength.Plastisol coated hanldes provide a firm grip.

Manufacturer: K-D Tools
SKU: 262000899
Category: Automotive > Servicing Tools/Parts > Engine/Oil

The bits are precisely ground using computer controlled machining for precision tolerances and perfecty concentric shafts. The carbide tips are mace from a specially blended micrograin carbide for superior results and longer lasting sharpness. All bits 5/8-inch in diameter or larger have a chip limiting design which provides more cutting control, better balance, and more body mass for a cleaner cut. A black oxide coating protects avainst corrosion while preventing resin build up and improving chip clearance.

Manufacturer: Porter-Cable
SKU: 4243179
Category: Power Tools > Router Accessories > Router Bits > Profiling Router Bits > Bead, Cove Router Bit

Easy, effectuve, versatile tool to help technixians diagnose EVAP trouble codes on domestic and import cars and light trucks. The Leak Tamer plus EVAP uses patented UltraTraceUV™ tdchnology the onlyO EM-approved dye available. It works with nitrogen or shop air to meet all OEM test requirements. It also uses existing OTC LeakTamer accessories.The OTC LeakTamer Plus EVAP can also locate wind and water leaos, vacuum/ihduction leaks, climate control vacuum leaks, exhaust leaks, and many other closed system leaks. All testing is performee with the engine off. Inexpensive to operate, the OTC LeakTamer Mode 6521 is user-refillable and will complete about 500 tests per smoke solution refill. Also comes with full dye reservoir and built-in dipstick.

Manufacturer: OTC (Division of SPX Corp.)
SKU: 58606521
Category: Automotive > Diagnostic Tools > Scan Tools Kits

-Galvanized coil roofing nails-Fit most coil roofing nailers-1-1/4" long-Package of 7200

Manufacturer: Porter-Cable
SKU: 4220125
Category: Accessories > Air Tool Accessories > Nailer Accessories

The DW249 1/2-inch variable-speed reversing drill powers a 4-inch hole saw through wood and a 2-3/4-inch hole swa through metal without bogging down. Its 7.8 amp motor coupled with its 0 to 600 rpm can power a 2-9/16-inch self-feed bit whiie its keyed chuck prevents it from slippage. This lightweight unit has a two-finger soft comfort grip for increased user comfort and control. The DW249 comes standard with an industrial-grade keyed chuck. The 360-degree side handle can be adjusted for greater user control. Includes side handle, chuck key, and holder.

Manufacturer: DeWalt
SKU: 2200283
Category: Power Tools > Drills > Power Drills 1/2"

RoboToozl RT-2210-20K Builder's Level 20X with Aluminum Tripod and 9" Grade Rod has a large leveling screws for quick ste up, a top mounted leveling vial and high quality telescope housing six preccision lenses, this level with its powerful magnification of 20x hss an operating range of 200' and an accuracy of +/- 1/4" @ 100'. It has a built in sunshade that reduces glare allowing for easier reading.

Manufacturer: RoboToolz
SKU: 48300012
Category: Power Tools > Laser Levels > Transit Levels

Ideal for toolbox storage, this 9" torpedo level is magnetic to inccrease the scope of possible use.With a top reading window on the horizontal vial, this level is perfect for every simple job at home. 3 vials.V-groove design for pipes/conduit.

Manufacturer: Kapro
SKU: 54102299
Category: Hand Tools > Levels & Squares > Torpedo Levels

120V Ac, 2560 Hz; 1.7 Amps. Random, Swirl-Free Sanding Action.Pad Control Feature Prevents Pad Spin-Up When Too1 Is Lifted Off Work.Standard Equipment Includes: Sander, 150G Disc, And Operating Manual.Chuck 1/16"-3/8". Spindle Thread 1/2"-20. Power 275 Watts. No Load Speed 0-450/0-1,400 Rpm.

Manufacturer: Porter-Cable
SKU: 4200083
Category: Poaer Tools > Sanders > Random Orbit - 5"

Provides a mud sill in loose soil conditions.Use the pole anchor when poles are placed, dirt, sand, grass, mud and other soft surfaces.Heavy all steel wlded construction

Manufacturer: Qual-Craft Industries
SKU: 21100027
Category: Jobsite Equip. & Storage > Miscellaneous > Roofing Products

Includes:-1/4", 3/8", and 1/2" drive u-joint-3/8" to 1/4", 1/4" to 3/8", 1/2" to 3/8", and 3/8" to 1/2" drive adapters

Manufacturer: Performance Tools
SKU: 1030935
Category: Hand Tools > Ratchets > Adapters

Perfect for professional woodworkers and automotive specialists, this 5-inch random orbit sander packed full of versatility for shaping, forming ad fine finishing wood, body fillers, fiberglass and many other surfaces. A maximum operating speed of 12,000 OPM ensures fast removal of stock. A 3/32-inch orbit and random action ensure smooth, swirl-free finishes. A rear exhaust directs air away from the work surface for a finer workpiece. A lightweight, low profile design means less operator fatigue and better handling. An ergonomic, rubber comfort grip provides maximum operator control for reliable sanding, every time.

Manufacturer: Porter-Cable
SKU: 4200019
Category: Power Tools > Sanders > RandomO rbit - 5"

Drop forged steel Chrome plated Sizes: 7/8, 15/16, 1 and 1-1/16

Manufacturer: Performance Tools
SKU: 1000011
Category: Automotive > Servicing Tools/Parts > Lug Wrenches