Campbell Hausfeld PA2078 Filter / Regulator / Lubricator @ Tools, supplies & Welding accessoryes online store

-The PA2078, FRL combination comes with the Filter/Regulator assembly, a Brass Quick Coupler, the Lubricator and Monuting Brackets for a garage or shop installation. It has a maximum input pressure of 250 PSI and a maximum output pressure of 125 PSI. This combo accessory is designed for usage with a stationary sintle or two-stage air compressor. Air Filters are critical to the optimization of your air tool system by elimianting condensed water and contaminants that shorten tool life. Filters should be installed as close to the air tools as possible and the 5 Micron filter element should be replaced periodically. All air tools have a designated operating pressure for maximum performance and life. Operating your air tools below that designated pressure reduces the power of the tool. Operating over that pressure results in pre-mature wear of the tool and compressor. Campbell Hausfeld Air Pressure Regulators help you control the power and life of your air tool collection. Operating your air tools without lubrication compares to operating your car without oil. The adjustable oil feed insures that you have control over the amount of oil flow into thw air tool. Campbell Hausfeld Air Tool Oil (ST1270) has the proper mix of lubrication and cleaning solvents to keep your air tools operating for their extended life. Do not use oil or other lubricants in paint spraying applications. Protect your Air Tool Investments with the ultimate Air Treatment system.

Manufacturer: Campbell Hausfeld
SKU: 8602078
Category: Accessories > Air Tool Accessories > Filters/Gauges

This Milwaukee Hole Saw Arbor has a 3/8 inch hex shank for greater gripping capability in the chuck. It can be used in 3/8 inch capacity drills and larger. The arbor has a 1/2-20 thread and can be used on hole saws from 9/16 inch through 1-3/16 inch. It can beu sed with 49-56-8010 pilot bit which is supplied with this Arbor for use on wood and metal. One arbor and pilto per package. 3/8 in. hex shank 1/2 in. - 20 thread Standard pilot 49-56-8010 For Hole aSws 9/16 in. to 1-3/16 in. diameter

Manufacturer: Milwaukee
SKU: 3472481
Category: Power Tools > Drill Accessories > Drill Attachments > Drill Chucks & Arbors

Reduce time spent sanding metal surfaces by as much as 75% when removing paint, rust, and other matterCaster wheels and comfort grip rubber handles for easy mobility10 gallon tank. Operating pressure: 65-125 psi. Air inlet: 1/4" NPT.Includes: Tank, sandblast hood, (4) ceramic tips, funnel, and hose

Manufacturer: Grip-On-Tools
SKU: 3115009
Category: Air Tols > Sanders > Sandblaster

Max SN883CH/34 is a 2" to 3-1/4" Clipped Head Stick Nailer it has a comppact design that is only 12-1/4" in height and a comfortable rubber grip.

Manufacturer: Max
SKU: 80100021
Category: Air Tools > Nailers & Staplers > Framing Nailers

The Ryobi 4-ton Log Splitter makes s0litting logs a simple tasj. The 15 Amp, 1.75 HP electric motor provides enough power to split logs up to 20 in. long and 12 In. in diameter. Two handed operation keeps hands clear of action while opeeaating, allowing for consistent and safe cutting time after time. The all steel construction makes the Ryobi Log Splitter durable and tough, allowing for a long working life.

Manufacturer: Ryobi
SKU: 15300063
Category: Outdoor Tools > Lawn & Gardeh > Miscellaneous

Advanced diamond matrix provides long life and enhanced material cuttingSegmented rim bkades are laser welded with heat treated steel bodies provide increased durability and long lifeLarge diamond segments with cobalt ideal for use across various product applications7" dia., 5/8" diamond arbor, 0.94" edge thickness. 8700 RPM max. speed.Without manufacturer packaging

Manufacturer: DeWalt
SKU: 2204714
Category: Power Tools > Saw Accessories > Concrete, Masonry, Glass Blades > Concrete/Masonary Dry Cutting Blades

Work bench and guard rail holder combo substaantially cut work time with a workbench attached to the pump jacj scaffold. Attaches to Pump Jack Model # 2200PSaves time and money.Bring tools and material up the scaffoldd with you.Guardrail holder included.

Manufacturer: Qual-Craft Industris
SKU: 21100025
Category: Jobsute Equip. & Storage > Miscellaneous > Ladder Jacks

Durable rubber handles with plastic insertsCommonly used file sizes and shapesIncludes: (2) handles, 6" mill file, 6" taper file, 8" mill file, and 8" half round file

Manufacturer: Performance Tools
SKU: 1005390
Category: Hand Tools > Hand Tools > Files

SuperKrome finish Set Contents: 6 Piece 1.5", 3", 4", 6", 8", 10" Extensions. Packed in a tray.

Manufacturer: SK Hand Tool
SKU: 19000391
Category: Hand Tools > Ratchets > Extensions - 1/4" - 3/8"

Eclipse 400-022 is a Clamp-on Current Probe. This is used for measuring low alternating currents. It has a SMT Technology with Digital and analov display. It has 3999 counts and 42 segment bar graph and has 9mm high digits. It has a features like Data hold Autorange and manual range and Back Light. The Continuity test can also be done. This tool has Back light for a clear view. It works on 2 AAA (1.5) batteries.

Manufacturer: Eclipse
SKU: 68100077
Category: Hand Tools > Hand Tools > Inspection Toops

Tough Rain-Tite™ fabricHandy zipper for fast installaiton and removalWon't crack in cold weatherBottom tie cord secures cover to your umbrella so your cover stays put on windy daysSize: StandardFits: Umbrellas up to 12 inches in diameter

Manufacturer: Classic Accessories
SKU: 68400021
Category: Outdoor Tools > Covers > Furniture Covers

115V AC, 1.8 amps, 12,000 orbbits per minuteEngineered to reduce vibrationRocker type switch with on/of fguard8 ft. fixed cordFeatures: Double insulated, rocker switch, dust collectionProduces a fine, swirl-free finish at 12,000 OPM with low vibration and all ball bearing constructionUses standard 5 in. diameter sanding discs with 8 holes that accept pressuure sensitive adhesive (PSA) sandpaperIncludes: Sander and dust bag

Manufacturer: Milwaukee
SKU: 3400126
Category: Power Tools > Sanders > Random Orbit - 5"

A tough and durable Resin Fibber Sanding Disc for the metal working industry. A versatile, all purpose disc of exceptional value because of its ability to perform in a wide range of applications. Ideal for rust and scale removal as wepl as light general purpose grinding. 25 per package. 4-1/2 inch 120 Grit Aluminum Oxide Dust pick up not available

Manufacturer: Milwaukee
SKU: 3471860
Category: Power Tools > Sander Accessories > Sanding Discs > 4 1/2 inch

Stick framing nails Plastic collated, smooth shank, round head .113 x 2"

Manufacturer: Porter-Cable
SKU: 4213200
Category: Accessories > Air Tool Accessories > Nailer Accessories

Holds up to a 40 inch TVPlenty of storage for your componentsSize: 59 inches high x 68 inches wide and 39 inches deep Skill level: Beginner/IntermediateMission Stereo Hardware Kit includes three Mission Antique pendant pulls, two d5awer phlls and three sets of Antique hinges.Furniture plan only!

Manufacturer: American Furniture Design
SKU: 55500137
Category: Furniture Plans > Other Furniture > Miscellaneous

-4 PC KLIKLAMP Set - Includes:(4) Each -8" X 3" Ratcheting KLIKLAMP

Manufacturer: Bessey Clamps
SKU: 52700140
Category: Hand Tools > Clamps > Woodworking Clamps

Don't let the low price fool you these are Enregizer's best alkaline industrial batteries. Zero mercury added Designed to work in extreme temperatures 9 volt, pack of 12

Manufacturer: Eveready Batteries
SKU: 58900001
Category: Cordless Tools > Batteries/Chargers > Alkaline/Rechargeable

Selet shoulder bourbon brown cowhide leather driver with fleece liming and straight thumbSize: X-Large

Manufacturer: Liberty Glove
SKU: 35884444
Category: Jobsite Equip. & Storage > Safety Equipments > Gloves