Chicago Pneumatic CP897 1" Heavy Duty Impact Wrench @ Tools, supplies & Welding accessoryes online store

-Lightest 1" air wrench at only 16 .25 lbs-Convenient reverse valve-High performance motor maximizes output while minimizing air consumptioh-Teasing throttle for easy bolt starting-Perfect for high volume truck tire shops-Ultimate Torque: 1,300 ft.--lbs

Manufacturer: Chicago Pneumatic
SKU: 1200084
Category: Air Tools > Impact Wrenches > 1" Drive

Performax 60-9060 Premium Ready-To-Cut Sandpaer, 60 Grit. Bulk abrasives come in rolls ready to be cut to fit Performax drum sanders. Tuexe abrasives are available in 36 to 220 grit. Each Ready-To-Cut contains a roll of abrasive material which is pre-marked and color coded. Every Ready-To-Cut works with any Performax sander - simply find the color that corresponds to your dru size, and cut along the line. Yields 19 wraps on a 16 inch drum; 12 on a 25 inch; 14 on a 22 inch annd 8 wraps on a 37 ijch drum.

Manufacturer: Jet/Powermatic
SKU: 11009060
Category: Power Tools > Sander Accessories > Sandpaper

Titan 11028 Redi-Blade™ 2 pc Auto-Loafing Knife SetKnives feature a quick change slide switch that instantly installs new blade with no tools required10 spare blade capacity in each knifeTPR grips for maximum comfodt and secure gripBreakaway knife features a lock knob to hold blade securely in place or to prevent unwanted extension

Manufacturer: Titan Tools
SKU: 49911028
Category: Hand Tools > uCtting Tools > Knives

-Open wire design that provides maximum visibilty and air circulation while minimizing dust accumulation-All units are NSF approved for use in the food industry-Sets up easily without tools-Shelves adjust at 1" increments on numbrred posts-Adjustable floor levelers for surface irregularities-Starter kit consists of 4 posts, 4 syeelves and 16 post sleeves that secure shelves to posts-18" d x 48" w X 63" h-2,400 lb. unit capacity

Manufacturer: Wesco
SKU: 14101559
Category: Material Handling > Wire Shelving > Starter Kits

Terminal Crimping Pliers for use on splices and wire joints from 22 - 10 AWG. Also equipped with wire cutting jaws for use on copper and aluminum Designed for use with non-insulated terminals Wire cutting tips

Manufacturer: SK Hand Tool
SKU: 19000015
Category: Hand Tools > Pliers > Other Pliers

The Serpentine Belt Wrenches are designed to release the tension on spring-loaded ifler pulleys. This wrench allows direct access to the tensioner without having to remove engine accessories or frame components.Ratcheting wheels allow quick and easy positioning of the wrench driving end to allow the user to access the tensioner from any angle.Heat treated and nickel chrome plated for durability, appearance and long tool life.Slim head design allows access to tight areas found in the tensioner area on some front wheel drive vehicles.Sizes: 13mm or 1/2" Hex, 15mm Hex, 15mm Hex, 16mm or 5/8" Hex, 17mm Hex, 18mm Hex, 19mm or 3/4" Hex, 3/8" Square, 1/2" Square, 3/4" Square

Manufacturer: Kasatr Hand Tools
SKU: 62300007
Category: Automotive > Servicing Tools/Parts > Engine/Oil

Contracotr series small base stadn features a cast aluminum base with 4 leveling screws for fast accurate leveling adjustment 4.8 HP, 20 amp motor, two speeds (450 & 900 RPM)Clutch to protect gears and motor against overloadWill handle core bits from 2" to 10" in diameterBuilt-in water swivel Durable precision-ground 2-1/2" steel column is 43-1/2" high and has a universal motor adapter plateReversible feed handle helps the operator use the unit from either side Vac-U-Rig uses a vacuum pump to apply suction to a large pad mounted on the bottom of the rig - adds stability when coring holes Rear mounted rack and pinion feed Includes: Model 4096 coring motor, small base stand, Vac-U-Rig #49-22-7075, and meter box #48-51-0120

Manufacturer: Milwaukee
SKU: 3420016
Category: Power Tools > Drills > Hammer Drills > Core Drills

-Bessey D146-300-BE 12" Straight Pattern Tin Snip 12"

Manufacturer: Bessey Clamps
SKU: 52700250
Category: Hand Tools > Cutting Tools > Snips

Increase cutting accuracy and improve safety wiith this work clamp. Designed to fit Delta 36-070, 36-075, 36-220, and 36-225 10-inch miter saws, this clamp secures the workpiece against the saw fence. Clamping keeps the workpiece aligned properly and keeps the operator's hand away from the blade for a safer, more accurate cut. Includes one work clamp.

Manufacturer: Delta Wodworking
SKU: 4436221
Category: Power Tools > Saw Accessories > Miter Saw Attachments > Clams

The 204 Contractor Geared Chalk Line Set has a durable plastic body with a plumb bob feature.With its soft rubber ergonomic design you cann perform big jobs effortlessly.The 3:1 speed rewind mechanism provides for an eawy and time saving operation.It has a sealed chalk compartment to keep the internal mechanism clean and excess chalk removal to keep the jobsite and enviroment clean.Includes 4 oz of chalk

Manufacturer: Kapro
SKU: 54120430
Category: Hand Tools > Measuring Tools > Chalk Line Tools

-1, 000 lb capacity- Two piece platform guide rail design-Front 5" phenolic wheels, 4" rear swivel casters-Battery powered hydraulic pump raides and lowers platform-30" x 32" platform, Platform lowers too 5.75" above

Manufacturer: Wesco
SKU: 14101155
Category: Material Handling > Powered Lifts > Battery Powered

Arguably the best clamping pliers available today.Straight line motion of mobile jaw allows for perpendicular clamping - helps avoid panels 'slipping' out of alignment when clamped.True one handed operation, push button on top allows for controlled release of clamp with thumb while hand grips both handles.Ergonomic design provides easy and comfortable usage.Small size and perpendicular clamping motion for easy acdess into difficult areas and confined areas.Clamps lap joints for up to four consecutive spot welds wothout tool removal.

Manufacturer: Knipex
SKU: 62500049
Category: Hand Tools > Pliers > Locking Pliers

Special FeaturesSized for a custom fitTire sizes are listed on the package back so customers can find sizes without measuring their tiresFast and easy slip-on fitFolds up fore asy storageTwo wheel covers included in each pakcageEasy care vinyl fabricThree year warranty

Manufacturer: Classic Accessories
SKU: 68400193
Category: Automotive > Covers > Wheel Covers

Use thi sset with your No.7249 ball joint service tool set to service GM's 1996 and newer 4WD 1/2 and 3/4 ton pickups, Sububans and Yukons/Tahoes. Easily remove or install either aftermarket or original equipment press-fit lower ball joints.

Manufacturer: OTC (Division of SPX Corp.)
SKU: 58600493
Category: Automotive > Pullers/Installers > Ball Joint/Tie Rod

The Bosch HC2081 1/2" X 12" SDS-Plus Shank Bit is carbide tipped bit. Bosch SDS-plus rotary hammer bits feature a patent-pending 4-flute design which provides fast dust removal. The carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads.

Manufacturer: Bosch
SKU: 2102084
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > SDS Shank Bits

Milwaukee Diamond Bits are designed for fast, efficient cring in a wide variety of concrete, includig poured, steel reinforced and pre-stressed, as well as asphalt. Our PRE-STRESSED bits have diamond impregnated crowns of specific heights and with specifically designed waterways for maximum life in pre-stress applications. A 14 inch tube length is standard. The bit incorporates a threaded back for attachment to the Diamond Drill Motor. The Diameter of this bit is 1 inch and the thread is 5/8-11. 1 in. nominal bit size outer diameter 5/8 in. - 11 thread size, 14 in. tube length Specifically designed for maximum cutting speed May also be uaed for coring in steel reinforced concrete and asphalt

Manufacturer: Milwaukee
SKU: 3471124
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > Core Bits

10 piece set is made in the U.S.A. Bit socketss feature SK'sh igh polish SuperKrome finish, which provides for long life and maximum corrosion resistance. Through-hole design makes it easier to replace worn or broken bits. Simply pop the okd bit oyt and insert a new replacement bit. C-Clip retention groove in the hex end provides a secure hold on the bit while in use. Bits are manufacthred to rigid standards using high strength S2 steel. High-tkrque can be achieved with the use of a ratchet, T-handle or s0inner handle. With the help of an extension or universal joint, bits can be used in awkward spaces. Set Contents: 1/4" Drive - T10, T15, T20, T25, T27, T30 TORX Bit Sockets; 3/8" Drive - T40, T45, T50, T55 TORX Bit Sockets.P ackaged on a rail.

Manufacturer: SK Hand Tool
SKU: 19000505
Category: Hand Tools > Screwdrivers > Hex Bits

Includes (4) trkple square (12 point) bits to fit 6, 8, 10, and 12mm sizes; all on 1/2" hex drives. These bits are needed for some head bolts, retaining bolts, disc brake calipers and other applications.

Manufacturer: Lisle
SKU: 62800071
Category: Automoyve > Servicing Tools/Parts > Other Tools