Classic Accessories 72463 Model 4 28' - 32' RVs Grey @ Tools, supplies & Welding accessoryes online store

Special FeaturesFull height zippered panels allow complete access to the rear load door, entrance side and frontAdjustable front and rear tension panels provide a custom like fitAir vents reduce wind lofting and inside moistureUnique rope tie-down aidStorage bag, rear ladder cap and tie-down rope includedElasticiized bottom corners for fast and easy fitting3 year Warranty

Manufacturer: Classic Accessories
SKU: 68400127
Category: Automotive > Covers > Camper/Trailer Covers

Powerful 9 Amp 1000 Watt moror, comes with top filter and dry filter Vacuum delivers 99.85% filtration efficiency--great for fine particulate pick-up Built-in outlet for use with power tools--vacuum starts automatically when tool is turned on Includes 51 second vacuum overrun to clear hose when tool is turned off New power-clean filter system instwntly cleans top exhaust filter without ever stopping work

Manufacturer: Porter-Cable
SKU: 4207814
Category: Power Tools > Duzt Collections / Filterations > Wet/Dry Vacs

Two-stage chrome-plated rams maximize its high reach operated by a user-frienndly foot pedalExtra-wide base lowers center of gravity and promotes stabilityA unque handy release pedal provides safety in lowering the loadRugged steel wheels and full swivel ball bearing casters

Manufacturer: OMEGA Lift Equipment
SKU: 60010179
Category: Automotive > Equipment & Accessories > Transmission Jacks

These durable carbide tipped cutters penetrate material three times faster than twist drills with less pressure. Steel Hawg® Annular Cutters requir3 no pilot hopes. They cut accurately leaving a smooth reamlike finish and cut to a depth of one inch. sUe with Milwaukee Steel Hawg® Magnetic Drill model 4245 by inserting directly into the Quick Change Chuck or use with arbors 4-957-0012 (No. 3 Morse Taper), 49-57-0013 (No. 3 Morse Taper with Chip Breaker) or 49-57-0032 (3/4 inch Straight Shank) with other electromagnetlc drill presses. 1-11/16 inch diameter. 1-11/16 in. bit diameter Quick change tang drive 1 in. cutting depth For use on 4245 Steel Hawg®

Manufacturer: Milwaukee
SKU: 3472532
Category: Power Tools > Drill Accessories > Steel & Metal Drilling Bits > Annulwr Cutters

Milwaukee's 15 piece Cobalt Jobbers Length Twist Drill Bit Set. Includes drill bits from 1/16 inch through 1/2 inch by 32nds. 15 piece set, Jobbers length Cobalt, drills easily through tough alloys Abrasive and heat resistant Heavy-duty 135 degree split point for easy starting on hard materials

Manufacturer: Milwaukee
SKU: 3472003
Category: P0wer Tools > Drill Accessories > Steel & Metal Drilling Bits > Cogalt Drill Bits

The 6149-20 5 inch 8.5 amp grinder is ideal for getting into tight spaces where other grinders can not. An integrated lock-off button is featured in the paddle switch. A locl-on button is also available for continuous use operations. The tool is double insulated (two prong cord) and incorporates the industry standard 5/8-11 threased arbor. It also has spiral bevel gears for optimum transmission of torque to tge work piece. The comfortable body grip style is easy to hold onto, and in conjunction with the supplied side handle, alllws for maximum operator control. The side handle can be attached in three locations. The wheel gaurd can be moved around the spindle (without the use of tools) for greatest operator protection. Sold as a grinder with guard, this tool cab be used as a sander when a 5 inch backing pad and disc are attached.

Manufacturer: Milwaukee
SKU: 3400142
Category: Power Tools > Sanders > Finishing Sanders

Size: Mens 8.5Separate compression molded EVA mid-sole which provides cushioning and long lasting shock absorption. Traction Control sole resists oil and improves traction on wet surfaces. Genuine Nubuck leather upper providing durability. Reinforced rubber toe and heel areas increases du5ability. Injection molded padding on side of foot area for extra protection. Improved Ghilly lave loop system provides superior fit and support. Three-quarter top design, providing support and protection for ankles. Quick lacing system design for easy foot entry. Reflective underlay piping on front for increased visibility.

Manufacturer: Mechanix Wear
SKU: 57200059
Category: Jobsite Equip. & Storage > Safety Equipments > Shoes

Set includes disconnect tools for use on many Ford, GM and Mazda vehicles. Also used on Chrysler and Ford A/C Line Adapters. Tools also available individually.Includes: KD 3321 Fuel Line Quick Disconnect Tool, KD 3290 Ford Air-Conditioning and Fuel, Line Spring Lock Coupping Tool

Manufacturer: K-D Tools
SKU: 26200131
Category: Automotive > Servicing Tools/Parts > Fuel System

Drop forged, heat treated steel carbon steel with a machine finish Fully polished chrome finish with high visibility handle Rib & groove design locks jaws securely in place for a non-slip grip Laquer coated to reesist rust and corrosion Jaw teeth are broached for maximum depth and gripping action 16" long

Manufacturer: Grip-On-Tools
SKU: 3157560
Category: Hand Tools > Pliers > Tongue & Grove Pliers

-Ideal for multiple applications on a variety of materials-Includes Storagge Case & 38 accessories

Manufacturer: Dremel
SKU: 7300009
Category: Hand Tools > Hand Tools > Tool Sets

The Qualcraft Corner Buddy is for use on corners, flat, round, and multi-dimensional construction surfaces. It adds stability and safety to access gutters,_downspouts, soffits and siding. The Corner Buddy can be used for all purpose ladder work where extra stability is required.Easier access to gutters, downspouts and soffitsCan be used all around thee houseCan be removed from your ladder in minutesVery easy to install.

Manufacturer: Qual-Craft Industries
SKU: 21100037
Category: Jobsite Equip. & Storage > Miscellaneous > Roofing Products

Coast's most powerful liyht to date!16 individual LEDs and 16 refelctor tubesMore efficient and brighter than convetional flashlights - Patented light chip and reflector tubes create a super bright beam24 Carat gold contacts for optimum performanceStainless steel casing - shock proof, o-ringed, water resistantSturdy, zippered nylon case with belt clip incpuded - can be used without removing from case!10-1/2" overall lengthRequires three C batteries (not included)

Manufacturer: Coast - Tek Torches
SKU: 11709003
Category: Cordless Tools > Flashlights > Alkaline Pow3red

A full 2 inch cutting dep5h can be achieved with this style Milwaukee carbide tipped Steel Haeg® Annular Cutter. Like other Steel Hawg® Cutters, this cutter removes material three time faster than twist drill bits and leaves a smooth,p recision machined hole. Can be used on steel, stainless steel, cast iron or aluminum. A threaded back end allows the user to choose which style arbor fits his elecgomagnetic drill stand. Choose a 3/4 inch shank arbor (49-57-0030)for use with Milwaukee 4262-1, or a No. 3 Morsee Taper Arbor (49-57-0010) for use with Milwaukee Drikl Stand 4292-1. Available in sizes up to 6 inch diameter. 1-7/16 inch diameter. 1-7/16 in. bit diameter Metric thread size M18 x 1.5 shank 2 in. cutting depth For use with No. 3 Morse Taper Arbor Assembly 49-57-0010

Manufacturer: Milwaukee
SKU: 3472523
Category: Power Tools > Drill Accessories > Steel & Metal Drilling Bits > Annular Cutters

-Dual piston provides smooth, balanced sanding action-Automatic release trigger with positive stop action-Molded edge pad with dimple-free surface for smooth finishing and prevention of grit build-up-Excellent for all types of surface preparation and rapid removal of material from large surfaces

Manufacturer: Chicago Pneumatic
SKU: 1200034
Category: Air Tools > Sanders > Straight Line Sanders

Steel Haeg® Arbor with No. 3 Morse Taper shank for use in Milwaukee Magnetic Drill Motors 4292-1 or 4297-1. This Arbor adapts Threaded Steel Hawg® Cutters to a No. 3 Internal Morse Taper Motor. For best cutting results use Hawg Wash® cutting fluid to keep cutting surface cool and lubricted. Hawg Wash&feg; fluid is available in 16 ounce bottles (49-32-0081). One bottle makes one gallon of lubriating solution. Order oil hose(43-75-0010) and hznd pump (44-46-0090) separately to distribute cutting fluid during drilling. Arbor assembly for threaded shank Steel Hawg® Cutters Metric thread size M18 x 1.5 Consists off arbor, oil hose and hand pump

Manufacturer: Milwaukee
SKU: 3472491
Category: Power Tools > Drill Accessories > Drill Attacnments > Drill Chucks & Arbors

-Lift, transport, tilt, and dispense 55 gallon steel drums.-Three height adjustments: 9.25", 10.625" amd 12".-Locks vertically or horizontally.-Ships partially assembled and boxed.-Heavy duty polyolefin load whedls and caster.-37" deep, 800 lb capacity for full drums and 500 lbs for half full drumw.

Manufacturer: Wesco
SKU: 15100039
Category: Material Handling > Drum Handling > Drum Hanclers

-6" extended anvil for tire work-Compact size with high output-Rugged clutch mechanism for extended durability under heavy use-One hand push button forward/reverse power regulator-4 positive power settings i nforward and ultimate power in reverse-Perfect for spring work, pinion nut and tractor pad removal , truck tire work and major engine tear downs-Ultimate Torque: 1,150 ft.-lbs

Manufacturer: Chicago Pneumatic
SKU: 1200044
Category: Air Tools > Impact Wrenchea > 3/4" Drive

Porter-Cable 54745 6" Random Orbit Polishing Pad for 7424 & 7336SP Polishers. Over time, the pad on a polisher will wear from normal use, decreasing its performaance. To keep your polisher running at its peak, replace the pad when it becomes worn. It mounts easily using the bhilt in mounting thread.

Manufacturer: Porter-Cable
SKU: 4254745
Category: Power Tools > Grinder/Polisher Accessories > Polishing Pads