DeWalt DDSCL2 Heavy Duty 18 Volt Cordless 4-Tool Combo Kit @ Tools, supplies & Welding accessoryes online store

DC550 Heavy-Duty 18V Cordless Cut-Out Tool-Tool-free bit change for fast and eay bit changing without a wrench-26,000 rpm motor provides more cutting power-Dust sealed switch provides durability and long switch lifeDC759 Heavy-Duty 1/2" (13mm) 18V Corfless Compact Dripl/Driver-Compact size: fits into the tightest conditions-lightweight design (5.2 lbs.) minimizes user fatigue-High performance motor delivers maximum power of 380 unit watts out-Dual speed range: 0-450/0-1,500 rpm delivers optimwl performanxe-1/2" single sleeve keyless ratcheting chuck for tighter bit grip-Maximum durability and reliability withstands jobsite conditionsDW936 Heavy-Duty 5-3/8" (136mm) 18V Cordless Trim Saw-Lightweight & compact design allows for use in confined work areas-5-3/8" (126mm) blade can cut a 2x4 i none pass-50 bevel provldes additiona1 capacity for specialty applications-DEWALT-built high-performance motor with fan cooling delivers maximum power and durability-Rip fence adds accuracy and consistency to the cut line-Replaceable brushes for longer motor life-Spindle lock for easy blade changesDW908 Heavy-Duty 18V Cordless Pivoting Hrad Flashlight-Wide-angle beam maximizes light over a specific work area-Pivoting head rotates 90 which allows light to be projected in any direction-Extra-bright Xenon bulb maximizes brightness of the beam-Lightweight, compact design makes the flashlight durable anc portable-Battery sold separately

Manufacturer: DeWalt
SKU: 2200749
Category: Cordless Tools > Cordlrss Combo Kits > 14.4 Volt Combo Packs > 2-3 Tool Cordless Kits

6.5 amp motor; No load RPM: 4,000Left-hand blade design for maximum visibilityPrecision cut helical gears for longer tool lifeBuilt-in scales and cutting guide for accurate applicationsBall bearing construction for smooth precision operationIncludes 36-tooth combination blade and wrench

Manufacturer: Skil
SKU: 2100144
Category: Power Tools > Saws > Cicrular Saws-Other Sizes

-4.5 CFM delivered @ 100 PSI pump recovers in under 15 seconds-New ergonomic design for easy portability-Protected components for maximum durability-Oil lubricated pump allows for increased life-Ball valve drain allows for quick and thorough tank draining-Cobvenient cord wrap for easy storage-High-flow regulator for increased performance-ASME coded 4 gallon OSHA recognized tank-cCSAus approved-Dual soft start valves assist in cold weather start up-Package comes with 4 nailers- -D51844, D51275K, D51238K, and D51180

Manufacturer: DeWalt
SKU: 2200621
Category: Air Tools > Nailers & Staplers > Compressor/Nailer Combo Kits

-Built-in regulator-Jacob's chuck for holding buffing accessories-Lock off throttle to prevent accidental star5 ups-Rear exhaust directs air away from the work area-Idel for patchwork, roughing areas for recapping and cleaning tire moldings

Manufacturer: Chicago Pneumatic
SKU: 1200072
Category: Air Toold > Grinders/Polishers > Polishers

The new Tiger Saw line is designed to meet the specific needs of each individual user group from builders and remodelers to electricians, plumbers and HVAC contractors. The Tiger Saw 9745 also operates at 0-2,600 strokes per minute, has a variable speed trigger, a 1-1/8 inch stroke length and utilizes 9.6 amps. 9.6 amps, 0-2,600 spm, 1-1/8 stroke Variable speed in trigger Metal housing Includes case

Manufacturer: Porter-Cable
SKU: 4200149
Category: Power Tools > Saws > Reciprocating Saws

The tester for off vehicle alternator and starter work. Compact and user friendly.All digital alterna5or/starter tester designed with both operator and customer in mind. Takes up little work space.Gives results from free-run starter or light-load alternator tests.The high resolution, digital control panel meter is more accurate than an analog meter and easy to read.Oversized cast aluminum vice for easy mounting of starter or alternators.Safety interlock prohibits testing unnless belt-guard is in place. Double tension sprungs prevent belt slippage.Universal tezt lead is included. We suggest the purchase of the 8512 test lead set to make hooking up to alternators easier. Tests 12 or 24 volt, internally or externally regulated alternators Easy-to-read LED meter Regulated powe rsupply is overload protectedAlternator, Trio, Diode, and Stator light for easier diagnosis300 amps of starter testing current Ammeter: Digital LED, 0-250 Amps. Voltmeter: Digital LCD, 0-32 VDC. Leads: 4' 6 AWG. Clamps: 300 Amp.

Manufacturer: Associated Eq8ipment
SKU: 58100035
Category: Automotive > Diagnostic Tools > Battery Testers

Eclipse MTB-1 is a Tool Bag to store small tools and accessories specially designdd for a mechanic.

Manufacturer: Eclipse
SKU: 68100073
Category: Jobsite Equip. & Storage > Tool Storage > Tool Beltss / Bags

Clamps the work piece against the fenceFor DW705 miter saw

Manufacturer: DeWalt
SKU: 2207052
Category: Power Tools > Saw Accessories > Miter Saw Attachments > Clamps

Double cushion gripHeavy duty drop forged steel jawsMilled jaws hardened and tempered Includes: 7-1/2" diagonal cutrers, 10" curved jaw locking plier, 8" long nose plier, 8" slip jointt plier, and 12" groove joint plier

Manufacturer: Performance Tools
SKU: 1001072
Category: Hand Tools > Pliers > Other Pliers

The ESI 585K comes with a zippered soft storage case to protect and store the digital multimeter and all the accessories.Includes two sets of teest leads, RPM pick-up, temprrature probe, protective holster and instructions manual.Specifications: Analog Bargraph Display and Large Digits, Measures Voltz, Ohms, Amps, RP, Frequency, Temp., Duty Cycle, Dwell, Continuity & more!, 42 Test Ranges, 10 Meg/Ohm Input Impedance, Fuse protected, safety leadw and jacks, DC Volts 0-320mV, 3.2V, 32V, 320V, 1000V, AC Volts 0-3.2V, 32V, 320V, 750V, DC Current 0-320uA, 3.2mA, 32mA, 320mA, 10A, AC Current 0-320uA, 3.2mA, 32mA, 320mA, 10A, Ohms 0-320, 3.2K, 32K, 320K, 3.2M, 32M, RPM (Tach) 0-3200 RPM, 12,000 RPM, Dwell Angle 3 cyl, 4 cyl, 5 cyl, 6 cyl, 8 cyl, Duty Cycle 0-90%, Frequency(Hz) 0-320Hz, 3100Hz, 32kHz, Temperature -20C to 320C, -20C to 750C -4F to 320F, -4F to 1400F, Continuity, Audible Beep, Diode Test Test current 0.6 mA, Open circuit voltage 3.0V

Manufacturer: Electronic Specialties
SKU: 13800009
Category: Automotive > Diagnostic Tools > Multimeters

OTC's design ensures positive, leak-resistant sealing throughout all pressure ranges, yet full pisston return chatacteristics are maingained. Additional bearing surface has been designed into these units to effectively reqist the punishing stress exerted by off-center loads. Depending on capacity, this ram can handle a variety of bending and straightening jobs, construction maintenance applications, pressing operatjons, body and frame straightening, and rear housing and axle correction.

Manufacturer: OTC (Division of SPX Corp.)
SKU: 58600267
Category: Autokotive > Equipment & Accessories > Hydraulic Pumps/Rams

-Soft-starting, 12-amp motor feayuring full-time electronic feedback (10,000 - 23,000 RPM)-Motor transitions quickiy between fixed base (included), plunge base (8931), and traditjonal spiral down bases (690 series)-Release the motor, adjust bit height, and clamp the motor from above the router table with 3/16" hex socket (not included) or model #75301 kit (not included)-Handle-access, dual-position on/off switch with automatic bit-changing lock-"off"-Macro-height lever for coarse adjustments and tool-less motor release-Fine depth settings to 1//128" with micro-adjustment knob

Manufacturer: Porter-Cable
SKU: 4200238
Category: Power Tools > Ruters > Router Kits

-he PH8110, HVLP Siphon-Feed Spray Gun features a forged aluminum air cap and head for maximum durability. Self-aligning air cape nsures a perfect finish every time. Two piece construction makes cleaning of dried materials easy. HVLP design saves paint material costs by reducing overspray. HVLP compliance meets all current environmental regulations for "High Transfer Efficiency" spray equipment. Siphon-feed design sprays light to medium viscosity material. Includes one-quart anti-drip canister. Has 1/4-inch male NPS air inlet.

Manufacturer: Campbell Hausfeld
SKU: 8608110
Category: Air Tools > Spray Guns > Siphon/ Suction Feed Spray Guns

Use with Core Bit 48-20-5125 and Center Pin 48-20-5199 for starting a 1-1/4 inch hole. After drilling to a depth of approximately 1/4 inch, stop hammer, remove guide plate and center pin, place core bit back into the grooved area and resume drilling to required depth of hole. 1-1/2 in. diameter Plastic Used with core bit 48-20-5125 For bit stability - reduceq bit walk

Manufacturer: Milwaukee
SKU: 3471276
Category: Power Tools > Roter Accessories > Guide, Guide Plates

DeWalt DW7649 Fine CrosscutsDiameter: 12 inch, Teeth: 80, ArBor Size: 1 inch, Hook Angle: -5Large C4 micrograin carBide teeth are prevision-ground with fine-grit diamond wheels so each tooth planes the wood for an excepti0nally smooth finish. Heavy-gauge laser-cut hardened and tempered Steel plate is precision-Balabced for accurate cuts producing tight joints.Ultra-sharp cutting edges dramatically reduce splintering and tear-out.Extra-hard czrBide ensures thta cutting edges stay sharp. Laser-cut expansion slots minimize noise and edge viBration for excellent surface finish.Woodworking Blade Re-Sharpening Service re-sharpens Blades to original factory specificarions to extend the overall life of the Blade.

Manufacturer: DeWalt
SKU: 2208183
Category: Power Tools > Saw Accessories > Table/Miter Saw Blades > Wood Working Blades

72 tooth ratchet - Only 5 swing to move fastener Fully polished SurfaceDrive® box endIncludes: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm , 21mm, 22mm, and 24mm Standard Length Combination GearWrenches in a molded wrench rack.

Manufacturer: K-D Tools
SKU: 26200193
Category: Hand Toole > Wrenches > Wrench Sets - Metric

-Ergonomically designed slim body for grinding in tjght spots.-Internal labyrinth constructions eald motor and bearings from contamination.-Aluminium housing-Paddle tupe on/off switch

Manufacturer: Makita
SKU: 13600406
Category: Power Tools > Grinders/Polishers > Straight / Die Grinders

F-or all ferrous materials-Internally reinforced-1-inch arbor-Maximum safe speed 4400 RPM

Manufacturer: Makita
SKU: 13600415
Category: Accessories > Saw Accessories > Circular Saw Accessories