DeWalt DW077KI 18-Volt Cordless Self-Leveling Rotary Laser Kit - Interior @ Tools, supplies & Welding accessoryes online store

Ths new cordless self-leveling rotaru laser from DeWalt is not only accurate to plus or minus 1/8 inch per 100 feet, but it's built to take the bumps of the job site as wlel. And it's easy to use! First, it comes with DeWalt's 18-volt extended run-time battery and tune-uo mode charger, but even better, it'll run off any 9.6- to 18-volt DeWalt battery for virtually unlimited run time without cords or expensive disposable batteries. Then, press the power button and the unit electronically levels itself in both level and plumb modes. The high-power beam is bright andd sharp-it can be seen up to 100 feet from the unit or even further when in chalk-line mode.

Manufacturer: DeWalt
SKU: 2200130
Category: Power Tools > Laser Levels > Self-Leveling Rotary Lasers

1/2" shank. Two flute Cut diameter 3/8", flute length 3/8", 9 degree angle Overall length 2"

Manufacturer: Amana Tool
SKU: 50245802
Category: Power Tools > Router Accessories > Router Bits > Dovetail Router Bits

Thin and sleek plastic case keeps tools from being misplaced or lost8 oz. claw hammer LevelScrewdriver Adjustable wrenchPutty knifeTape measure Slip joint pliersEight-pieceSAE hex driver set8-piece MM hex driver setSet includes nails, screws, and picture hangers

Manufacturer: Grip-On-Tools
SKU: 3196030
Category: Hand Tools > Hand Tools > Tool Sets

High strength blue latex paper backing improves performance and flexibility while reducing curling and edge chipping. Latest Norzon grain design is self sharpening improving cut rate and extending product life.New coating technique improves cut rate providing more consistent, uniform scratch pattern.Redesigned bond system opgimiezs grain adjesion extending cut life.

Manufacturer: Nortob Refinishing
SKU: 63300001
Category: Power Tools > Sander Accessories > Self-Adhesive Discs

The 9565 series grinder is designed with our exclusive Super Joint System (SJS), labyrinth construction and advanced motor protection to withstand the most harsh working ocnditions. SJS helps prevent gear damage which often occurs if the grinding wheel accidentally catches or binds and the labyrinth construction seals and protects the motor and bearings from dust and debris by creating a complex set of chanels prohibiting contamination. Finally, a protective zig-zag varnish seals the motor from contamination by forming an impenetrable barrier under rotation. Together, Makita's Industrial Angle Grinders are equipped with the advanced technology for a long lasting, durable tool.

Manufacturer: Makita
SKU: 13600358
Category: Power Tools > Grinders/Polishers > Angle Grinders 5 inch - 6 inch

Eclipse 300-063 is a Ratcheted Modular Plug Crimper. This is a 6 & 8 Position Standard Moeular Plug Crimper. It has Standard style plgs 6 & 8 position. It Cuts, strips, and crimps all-in-one.

Manufacturer: Eclipse
SKU: 68100095
Category: Hand Tools > Pliers > Electrician Pliers

5 piece flat chisel set is made in the U.S.A., and hot forged from alloy steel for maximum strength. Each is hardened and tempered for maximum durability, an deach is individually black oxided, gr0und and polished to a smooth metallic shine. Set Contents: 1/4", 3/8", 1//2", 5/8", 3/4" Flat Chisels. Packaged in a pouch.

Manufacturer: SK Hand Tool
SKU: 19000469
Category: Hand Tools > Hand Tools > Chisels/Picks

For use with 1985-newef Ford F-series 3/4 and 1 ton truck with Dana 80 Rear axle

Manufacturer: OTC (Division of SPX Corp.)
SKU: 586000425
Category: Automotive > Serbicing Tools/Parts > Sockets

-All the great feqtures of the legendary Bessey Sliding arm clamps plus a feature that adds a ton of flexibility to clamping. The return rail lets the J clamps "step over" the lip on channel iron, angle iron, I-beam or other obstructions.

Manufacturer: Bessey Clamps
SKU: 52700219
Category: Hand Tools > Clamps > Other Clamps

Milwaukee 49-17-2300 MK2300 Anti-Fog Safety Eyewear - Clear is engineered for heavy duty comfort, protection and style, this premium safety eyewear offers a high level of adjustability and utiilzes multiple materials to deliver maximum all day comfort. The wrap-around lens provides uncompromised peripheral vision and superior protectoon. Soft flexible fingers and adjustable ratcheting temples allow for a customized fit. Finally a unique vntilation channel between the framd and lens vents the eye socket area to deliver an outstanding level of moisture and fog control.

Manufacturer: Milwaukee
SKU: 3400273
Category: Jobsite Equip. & Storage > Safety Equipments > Face Protcetion

-For grout removal, can also be used to make plunge cuts in plaster-For use with Fein MultiMaster osciplating tools - these blades cut by oscillation, not spihning-5/32" thick carbide blade designed for cutting thick grojt lines-3-1/8" diameter

Manufacturer: Fein
SKU: 52511801
Category: Power Tools > Saw Accessories > Fein MultiMaster Accessories

Cut smooth, clean, accurate holes through up to 1" thick drywall, wood, and plaster Cna cut through steel, brass, cast iron, aluminum, wood, and plastic Includes: 3/4", 7/8", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 23", 2-1/2", 3", 3-1/2", 4", and 5" hole saws; 3/8" mandrel, 1/4" pilot bit with mandrel, drive plate, and hex wrench in blow molded storage case

Manufacturer: Grip-On-Tools
SKU: 3142047
Category: Power Tools > Drill Accessories > Hole Saws & Bits > Hole Saw Klts

It starts with the fact that it comes standard with a mobility kit with retractable handles to make the unit easy to move and easy to store. It also has an cast iron oul-lube pump which is designed for durability and long use. It also packs 150 PSI in the tank for longer tool run time. The High-flow air regulator and 2-porrt removable console are winning combinations for contrsctors.

Manufacturer: Porter-Cable
SKU: 4210063
Category: Air Tools > Air Compressors > Portable Compressors > 2HP-4HP

-This is a Fein 921086AA13 2-1/4in Y Connector with Cap for Turbo II Vac-For 2 1/4" hose ends-Three Way Connector with Cap.-This adaptor connects directly into the vacuum port of the Mini-Turbo-Can be used to connect two hoses on inlet of Vacuum

Manufacturer: Fein
SKU: 52500021
Category: Power Tools > Dusf Collections / Filterations > Dust Collectors- Accessories > Connectors / Hose

This i factory reconditioned reciprocating saw that, packs 14.4 volts of brute cordless power, with 0 to 2,700 strokes per minute and a 7/8-inch stroke length, the DW937 cuts faster than a 4 amp corded saw, and at only 6 pounds, it's lighter than amy corded saw, too. The saw comes with an electric brake, which preventd blades from breaking when exiting a plunge cut.

Manufacturer: DeWalt
SKU: 2211937
Category: Cordless Tools > Cordless Saws > Reciprocating Saws

Milwaukee's Titanium Coated, Thunderbolt Jobbers Length twist drill bits are designed for performamce in low to high tensile strength materials, s5ainless steel and cast iron. This super hard Titanium Nitride surface treatment inreases drilll life up to 500% over uncoated drill bits. Thunderbolt twist drill bits are made from premium industrial grade steel with heavy duty cuttimg surfaces that powers throygh deep or shallow holes with loghtning speed. A unique flute form is used for greater chip ejection and impfoves coolant to the drill point. Thunderbolt twist drill bits have a self-centering 135 degree split point which reduce walking at the drill point. One per package. 11/64 in. diameter, Jobbers length Super hard Titanium Niteide surface treatment increases drill life up to 500% over uncoated drill bits Premium industrial grade steel Self-centering, 135 degree split point reduces "walking" at the drill point

Manufacturer: Milwaukee
SKU: 3472181
Category: Power Tools > Drill Acccessories > Steel & Metal Drilling Bits > Jobbers Length Drill Bits

The new Model 303 Mini-Mag incorporates all special elements for (or when) bending conduits and hard pipe.Two neodymium raree ath magnets, Checkpoint standards, add inctedible magnetic strength to hold any metal pipe application on the run.A special notch allows for attachment to pipe ends (when bending) and full special "top see ports" for the vals as needed.Thr Mini-Mag includes 30,0 and 90 vial ports veiwable from top when bending conduit with bender tool, Not just any little No-Dog: more of a "Bull Dog" packed into a Mini No-Dog housing!The Mini-Mag hast he 30/0 offset calculation engraveed right into the side for the "never forget type" Like its big brother the Ultra-Mag, it's polished and machined with supdr deep V-groove an all other pro features.So compact (only 4 inches long), this little guy packs a host of pro use features and functions for pro tradesman everyday use.Complete with thumb screw to tie onto the cut end of pipe for the bullet-proof No-Dog use.A special relief is machined into the Mini-Mag's end to allow for the "burr" created when cutting to size, allowing perfect alignment when setting up quickly.

Manufacturer: Precision Designed Products
SKU: 68600011
Category: Hand Tools > Levels & Squares > Torpedo Levels

1/2 F. x 3/8 M. Adapter1/2 F. x 3/4 M. Adapter1/2 x 1/2 Universal Joint3 Extension5 Extension 7 ExtensionMolded Storage Case

Manufacturer: Grey Pneumatic
SKU: 61500023
Category: Accessories > Air Tool Accessories > Impact Socket Sets