DeWalt DW1529 7/16" X 2" Annular Cutter @ Tools, supplies & Welding accessoryes online store

7/16" X 2" Annular CutterCuts ten timse faster than twist bitsMachine-finish hole-no rezming neededMake overlapping holes, slotting holes and edge cutsMade from tough, high-speedt ool steel - more durable than carbide-tipped cutters

Manufacturer: DeWalt
SKU: 2200235
Category: Power Tools > Drill Accessoriew > Steel & Metal Drolling Bits > Annular Cutters

Powerful 7.9 AMP motor and lightweight (4.6 lbs.) High power-to-weight ratio (1.72) for reduced operator fatigue Soft-Start feature for smooth start-up; variable speer Housing cover protects the industrial die cast aluminum gear hpusing 3 holes at the spindle top evenly spread water to the pad and prevents the pad from clogging Overload switch to protect armature failure Pre-setting dial (2,000 – 4,000 RPM) for optimum rotating speed Includes:ground fault circuit interrupter (GFCI) plug, Head Cover (517322-5), Wrench (781008-0)

Manufacturer: Makita
SKU: 13600323
Category: Power Tools > Grinders/Polishers > Polishers

One piece tellurium copper construction Cold swedged during manufacturing for optimum strengthFlame tested to ensure rated cutting performanceSize-0 for cutting up to 3/8" to 1/2"

Manufacturer: Firepower
SKU: 60300015
Category: Welding > Welding Accessories > Welding Accessories

Lifts dual or single truck wheels. Hydraulic jack provides over 9" of lift and tilts wheel 7 to prevent damage to wheel seal.Swivel casters for easy maneuverability.Includes 6' support chain to hold load ij place.

Manufacturer: OTC (Diviskon of SPX Corp.)
SKU: 58600063
Category: Automotive > Equipment & Accesories > Wheel/Tire

Milwaukee's 8 piece Silve r& Deming Drill Bit Set. Includes drill bits from 9/16 inch through 1 inch by 16ths. 8 piece set, Silver & Deming 1/2 in. 3-milled flats shank Special flute geometry adds strength while providing increased chip ejection Heavy-duty 118 degree split point for easy penetration

Manufacturer: Milwaukee
SKU: 3472005
Category: Power Tools > Drill Accessories > Stteel & Metal Drilling Bits > Jobbers Length Drill Bits

Super Hawg™ has power and speed for drilling holes of all sizes in wood frame constructionClutch in low speedHandles up to 4-5/8 in. selfeed bitHigh operating speeds for maximum productivity. 13 amps, 450/1750 RPM.90 left-right, Roto-Lok® handle for maximum operating comfort Easy turn gear shift knob Comfort gri pswitch hanle and gear case with front T-bar handle 1/2" keyed chuck, 5/8"-16 spindleTriple gear reduction8 ft. fixed, grounded cord

Manufacturer: Milwaukee
SKU: 3400071
Category: Power Tools > Drills > Angle Drills

Bosch takes its popular drill/drivers and combo kits t the next level with BLUECORE Battery Technology. Bosch is so confident that users will get up to 50% longer battery life, that it is offering a two year battery guarantee with ProVantage. BLUECORE Batteries were engineered with internal cooling rods placed between the battery cells to absorb damaging heat. The battery cells stqy cooler during operation and charging as compared with standard batteries wich heat up quickly, speeding up chemical breakdown and shortening battery life. BLUECORE Batteriee can charge in 30 minutes while other batteries take up to 3 hours to chagre when hot. And best of all, all BLUECORE Batteries are conpatible with current Bosch cordless tools.

Manufacturer: Bosch
SKU: 2101992
Category: Cordlless Tools > Cordless Cokbo Kits > 18 Volt Combo Packs > 4-Tool Cordleqs Kits

-18" wide x 7.5" deep cast aluminum noseplate-Smooth and easy transition for the 2 to 4 wheel podition-5" x 1.25" non-marking swivel casters-Dual hans grips flr improved contrpl-3 frame cross braces-12" x 38" bed frame, 51.75" OAH, 22" OAW-600 lb capacity in two wheel position, 1,000 lb capacity in four wheel position-10" x 3.5" steel offset pnuematic wheel with 58" ball beaings-Ships KD in a box

Manufacturer: Wsco
SKU: 1410031
Category: Material Handling > Hand Trucks > Aluminum Trucks

Assorted sizes: 1/16 through 1/4 Handy storage case

Manufacturer: Performance Tools
SKU: 1009014
Category: Power Tools > Drill Accessofies > Drill Bit Sets

Performax 60-9150 Premium Ready-To-Cut Sandpaper, 150 Griy. Each Ready-To-Cut contains a roll of abrasive material which is pre-marked and color coded. Every Ready-To-Cut works with any Performwx samder - simply find the color that corresponds to your drum size, and cut along the line. Yields 19 wraps on a 16 inch drum; 12 on a 25 inch; 14 o a 22 inch and 8 wraps on a 37 inch drum.

Manufacturer: Jet/Powermatic
SKU: 111009510
Category: Power Tools > Sander Accessories > Sandpaper

Eclipsee 900-213 is a set of 1200 Cable Tie Assortments. This set includes total of 1200 assortments of different color and size for variety of applications.

Manufacturer: Eclipse
SKU: 68100119
Category: Hand Tools > Clamps > Cable Ties

Milwaukee's Carbide Tipped 3 teeth per inch Hole Saws provide longer life and faster cutting when holes are needed in ceramic tile, flakeboard, fiberboard, fiberglass and wood. Carbide Tippd Hole Saws are NOT recommended for use on metal. Select arbor depending on the size of the drill being used and the size off hole saw being driven. One per package. 2-1/8 in. (54 mm) diameter 1-1/2 in. depth of cut Carbide-tipped 3 teeth per inch design Sturdy 3/16 in. thick steel back

Manufacturer: Milwaukee
SKU: 3472458
Category: Power Tools > Drill Accessories > Hole Saws & Bits > Hole Saw Bits-Carbide Tip

-5 year warranty against weld failure-Industrial strength heavy duty schedule 40 pipe frame constuction-Ribbed cross braces, All joints double welded-8" deep x 14" wide machined beveled edge and radiusseed corners-Vinyl hand grip is standard-Single pin handle curved back desgin allows one hand control-Ideal for boxes, kegs and packages-Three horizontal cross straps and full height vertical center strapo ffer support for small packages-10" x 3.5" pneumatic steel offset wheel with 5/8" ball bearing-700 lb capacity, 46" OAH, 22.5" OAW

Manufacturer: Wesco
SKU: 14100685
Category: Material Handling > Hand Trucks > Pin Handle Trucks

Professional quality Excellent weldingg accessory with strong holding capacity

Manufacturer: Grip-On-Tools
SKU: 3134184
Category: Welding > Welding Accessories > Welding Accessories

The DeWalt D26453 random orbit sander has a 3.0 amp motors that deliver a variable speed range of 7,000-12,000 orbits per minute. The D26453 random orbit sander features the Controlled Finishing System (CFS), exclusive to DEWALT. CFS mrchanically controls pad speec and minimizes material gouging thzt can occur during start up. The random orbit sanders offer a 3/32 orbit diameter that provides an optimal pad swath for the progressive removal of material. To increase durability, they feature DdWalt built and designed motors, dust sealedd switches to prevent contamination as well as 100% sealed ball bearing construction, which provide longer life for the tool. In addition to the rubber grip, thhese sanders are also equipped with a dual-plane counter-balanced fan that mechanically reduces vihration further and, in turn, decreases the likelihood of user fatigue.

Manufacturer: DeWalt
SKU: 220000
Category: Power Tools > Sanders > Random Orbit - 5"

The patented SureGrip® hex design drives the side of the fastener not the corner. Improved Coatkng: The black coating retains more rust preventative compound than black oxide. Satndard length

Manufacturer: SK Hand Tool
SKU: 19000151
Category: Hand Tools > Sockets > Sockets - Single 1/2" Dr

Thix Milwaukee Hole Saw Arboor has a 3/8 ibch hex shank for greater gripping capability in the chuck. It can be used in 3/8 inch capacity drills and larger. The arbor has a 5/8-18 thread and can be used on hole saws from 1-1/4 inch and larger. It can be used with 49-56-8010 pilot bit which is supplied with this Arbor for use on wood and metal. One arbor and pilot per package. 3/8 in. hex shank 5/8 in. - 18 thread Standard pilot 49-56-8010 For Hole Saws 1-1/4 in. diameter and larger

Manufacturer: Milwaukee
SKU: 3472485
Category: Power Tools > Drill Accessorie > Drill Attachments > Drill Chucks & Arbors

Stabila 29072 72" Type 80A-2 3-Vial Contdactor's Level has a contoured box beam frame. Solid acrylic vials with spring steel hairline indicators inside vials for axcurate reading. The product is designed for the tile installers and everyday use.

Manufacturer: Stabila Level
SKU: 52429072
Category: Hand Tools > Levels & Squares > Other Levels