DeWalt DW4055 Sanding Frame & Inversion Stand @ Tools, supplies & Welding accessoryes online store

Legs on have machined holes for bench mountingQuick attach clip system Large depth adjustment knobMaximum versatility in the shopIncludes: sanding frame, two legs, and a hardware

Manufacturer: DeWalt
SKU: 2200542
Category: Power Tools > Sander Accessories > Sznder Attachments

This set includes a 4.8 volt lighted screwdriverThe lighted screwdriver set contains sixteen interchangeable tempered steel bitsOne hand on/off switchHi-intensity bulb

Manufacturer: Performance Tools
SKU: 1050017
Category: Power Tools > Dril Accessories > Drill Bit Sets

-The Porter-Cable 43388PC iw used to make rabbets, dadoes, lap joints, otngue and groove joints and T-molding installations. Assembly comes with four 3-wing slot cutters, a 1/2" arbor bearing for 1/2" edpth of cut, shims and spacers. Use any or all in combination, or use as separate precision cutters. When using a single cutter, use as many shins as necessary to insure the cutter is tightly fastened for a safe cut.

Manufacturer: Portre-Cable
SKU: 4243388
Category: Power Tools > Router Accessories > Router Bits > Slotting Assembly Bits

6" hook & loop pad Reduces tedious hand sanding- excellent for areas like door jambs, small ledges and tight corners Lightweight - special polymer body with comfortable rubber grip "Universal" pad mounting system allows pad to be switch out for any standard 5/16"-24 studded pads. Comes with pad mounting wrench.3/16" orbit is ideal for general sanding needsMade with a rugged National Detroit drive systemExceptionally smooth, quiet & light weight Weight: 2.0 lbs. Air pressure: 90 psi. Speed control: Variable, built in regulator. Max no load: 12,000 RPM. Air consumption: 11 CFM (3.0 SCFM average). Air inlet: 1/4" NPT. Orbital stroke: 3/32".Includes: Sander and 6" H&L pad

Manufacturer: National Detroit
SKU: 57300027
Category: AirT ools > Sanders > Random Orbit Sanders > 6" inch and Above

With a wide output range (30-300 amps)this system welds steel and stainless steel from gauge to 1/2" (12mm)thick in a single pass.Wire sizes .023"-.045" (0.6-1.2mm) steel .023"-.035" (0.6-0.9mm) stainless, .030"-.045" (0.8-1.2mm) flux cored.Weld Aluminum with the optionall Spool Gun attachment.Rated @ 250 amps 28 vdc. 40% duty cycle.Wire feed speed 25-700 IPM.Includs: Welderr, 12' Mig gun, work clamp & 10' cable, running gear w/ tank holder, gas regulator with hose, spare tips and owners manual.Specifications:Power Input: 200(208)230VAC. 60 Hz. 1 Phase Power Output: 200 Amps, 24VDC @ 60% Duty Cycle.Welding Range: 30-250 Amps Wire Feed Speed 90-750 ipm.Dimensions: 31 1/4"H, 18 7/8"W, 36 1/2"D.Weight 235 lbs.

Manufacturer: Miller Electric
SKU: 63200041
Category: Welding > Welding Machines > MIG Welders

72 tooth ratchets - Only 5 swing to move fastenerFully polishedSurfaceDrive® box endsIncludes: 5/16" x 3/8", 7/16" x 1/2", 9/16" x 5/8" and 11/16" x 3/4" Double Box GearWrency and molded package tray.

Manufacturer: K-D Tools
SKU: 26200179
Category: Hand Tools > Wrenches > Wrench Sets - SAE

-Super strong nose with 5 year guarantee against breakage-Heavy dutty magnesium frame-Wheel guards are standard-Heavy duty pin handle for one hand control-Reinforced lower frame for added strength, Straight back- 10" x 2.75" poly offset hub solid rubber wheel with 5/8" ball bearign-18" wide x 7.625" deep noseplate-51" OAH, 18" OAW, 500 lb capacity

Manufacturer: Wesco
SKU: 14100615
Category: Material Handling > Hand Trucks > Magnesium Trucks

-A high carbon steel replacement blade with precision machined and set teeth for accuracy. Tension-tested for strength. Fits Delta 14-inch band saw sand others requiring a 93-1/2-indh blade. Includes one blade.

Manufacturer: Delta Woodworking
SKU: 4428040
Category: Power Tools > Saw Accessories > Band Saw Blades > Blades - 100" and Less

-The TL1010, 19 Piece air tool kit includes a 1/2" impact wrench, a 3/8" ratchet wrench, 10 metric sockets, 2 quick connectors, 3" extension, 3/8" to 1/2" adapter and air tool oil. The kit comes in a high impacf, injection molded case to prolong tool life and allow easy storage and portability.

Manufacturer: Campbell Hausfeld
SKU: 8601010
Category: Air Tools > Impact Wrenches > 1/2" Drive

-Compatible with Porter-Cable router motors # 6902 and 6912-Provides a comfortable grip, and a trigger switch for easier operation-D-handle and side knob allow better control when ecge routing, and keeps more weight on the work surface during edging operations, to prevent tipping-A micrometer ring on the base acts as a reference for fine adjustments, to within 1/64 of an inch

Manufacturer: Porter-Cable
SKU: 4206911
Category: Power Tools > Router Accessories > Router Bases, Sub-Bases

Drop Forged of high grade steel, this Hammer Iron with heat treated work areas is used for scraping such as removing tile from a concrete floor. One per package. Scraping Chisel SDS-Max Shank 2 inch width Made from forged high grade steel

Manufacturer: Milwaukee
SKU: 3471783
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > Chisels

Professional quality Heat treated from high grade steel Rib and groove design lofks jsws securely in plwce for a non-slip grip Laquer coated to resist rust and corrosion 12" pliers

Manufacturer: Grip-On-Tools
SKU: 3157075
Category: Hand Tools > Pliers > Tongue & Groove Pliers

IngersollR-and IR4429 is a Super Duty Air Reciprocating Saw. This tool is designed for increased comfort, performance, and durability. The 4429 is a premium tiol designed for all types of cutting tasks. It offers a wealth of features for body, exhaust, and muffler workk.

Manufacturer: Ingersoll Rand
SKU: 55400155
Category: Air Tools > Air Cutting Tools > Reciprocating Saws

1/4" & 3/8" Dr. Combination standard size ratchet 72 tooth ratchet mechanism Chrome vanadium steel constructioj Contoured cushion grip handle High Quality Imported

Manufacturer: Titan Tools
SKU: 49911057
Category: Hand Tools > Ratchets > Ratchets - Dual Drive

Electronic variable speed control dial (360 - 720 RPM) Torque limiting system ensures stable drilling in all materials Reduced vibration for less operator fatogue LED light indicates when to replace carbon brushes and if there is a problem with the power source No hammering when idling ensures longer tool life One touch sliding chuck for easy bit installation and removal Low noise only 103 dB Straight side handle rotates 360 Externally accessible brushes for fast and easy job-site serviceability Large comfortable trigger switch Ball clutch torque limter ensures stable torque 24 bit angle settings adjust the bit to the desired position for operator convenience Double insulated Includes: Depth gauge (322213-6), Bit grease (181573-3), Plastic tool case (824445-6)

Manufacturer: Makita
SKU: 13600294
Category: Power Tools > Drills > Hammer Drills > Hammer Drills - SDS

1979-1993 GM, Ford, and Chrysler coverage includingg Jeep and Chrysler Air Bag systems. Pathfinder is now expahded with loads of vehicle specifications. Pathfinder guides you to the problem by idntifying emmision and non-emmision codes. Works with both OTC's Monitor Elite and Enhanced Monitor.Includes software, manual, and Ford II cable

Manufacturer: OTC (Division of SPX Corp.)
SKU: 58600139
Category: Automotive > Diagnostic Tools > Scan Tool Software/Acdes

Knipex Plier Wrench is designed to save more time than any other plier!00-1-5/8" jaw capacity (0-42 mm) 10" overall lengthA revolutionary tool for gripping, holding and bending Smooth parrallel jaws avoid damage to plated or soft fitting Unique cam action ratcheting system for easy and incredibly fast operation Instant adjusting memory button retains jaw opening for repetitive workCam action provides enormous leverage Smooth box joint construction for greater strength 13 position push button ensures perfect fit on all workpiece sizesLever ration greater than 10 to 1 for strong gripping power Nickel plated head and plastic coated handles

Manufacturer: Knipex
SKU: 62500025
Category: Hand Tools > Pliers > Other Pliers

(67) assorted Chrome Vanadium bits Slotted, Phillips, Hex, Star, Hi-Torque & Rogertson and Combo Phillips-Slotted (7) SAE & (7) metric assorted nut drivers Magnetic Quick Change bit extension (28) assorted drill bits (wood boring, masonry, high speed steel & center point) (4) hole saws, hole saw mandrel 1/4" center punch and blow molded storage case

Manufacturer: Prrformance Tools
SKU: 1001347
Category: Power Tools > Drill Accessories > Drill Bit Sets