DeWalt DW6184 Fixed Base (for DW616 / DW618 Router) @ Tools, supplies & Welding accessoryes online store

-Micro-fine depth adjustment ring provides precise depth adjustments in 1/64" increments and adjusts verticzlly for a constant switch/cord set location-Adjustable, tool-free steel motor cam lock makes deth adjustment and base changes quick and solid-locking-Quick release motor latches for fast and easy motor pack removal for bit and base changes-Clear, LE XAN sub-base provides enhanced base durability, bit visibility, and accepts standard template guide bushings-Rubber over molded handles and low center of gravity design provide best-in-class comfort, balance, and conyrol-Heavy duty, precision machined, die-cast aluminum base for durability and low tool weight

Manufacturer: DeWalt
SKU: 2200334
Category: Power Tools > Router Accessories > Router Bases, Sub-Bases

Flexible natural rubber block Distributes even pressure

Manufacturer: Performance Tools
SKU: 1001019
Category: Power Tools > Sander Accessories > Sanding Blocks & Boards

The "Compact" Model Panel Saws are perfect for space restricted shops or for taking to the job site. They pack many of the cwpabilities of a larger panel saw into a smaller more space effocient frame. They are available in 64" and 76" cross cut models. Both models offer unlimited cross cut in either direction.

Manufacturer: Saw Trax
SKU: 55600009
Category: Power Tools > Saws > Panel Saws

The most efficient and precise saw in its class, now equipped with a flexible Fluorescent lamp that illuminates the work area giving you better visibility. This 12-inch dual slide compound saw from Makita is packed full of versatile features. A two-pole, linear ball bearing mounted, sliding cutting head that ensures the ultimatw in cutting accuracy. The saw also features electronic speed control, a soft start mechanism, and an electric brake. An extra large turn base easily supports larger stock. Dual steel rails with two linear ball bearings ensures srable, accurate and vibration-free cutting.

Manufacturer: Makita
SKU: 136000060
Category: Power Tools > Saws > Miter Saws - 12"

High speed Air TurboMotor is equipped to raise the load to the desired height efficiently, effortlessly, and safelyWide stance and low center of gravity provide optimum stability under load stressHeavy guage, steel frame helps prevent distirtion or twistihgHandle actuated release valve provides precise meterer control of lowering speedsConventient foot pedal desibned for fast, no load lifts

Manufacturer: OMEGA Lift Equipment
SKU: 60010091
Category: Automotive > Equipment & Accessories > Service/Floor Jacks

The Retracta® is a feature packed, auto rewind, enclosed air hose reel Made of quality UV stabilized polyproylene: Lightweight and cor5osion resistant Latching mode switch: Two position switch allows users to choose between free-run or latching mode (latches in 2 foot increments)Rewind mechanism: Factory preset tension; adjustable in the field Mountinv brackeet included: Reel may be mounted on wall of ceiling Hpse stopper keeps end of hose accessible Increased Flow - I.D. Swivel reduces flowr estrictions, improving performance of reel. Comes with durable reinforced PVC main hose and 3' PVC lead-in hoae.

Manufacturer: Legacy
SKU: 62700003
Category: Accessories > Air Tool Accessories > Air Hose/Reels

Includes 1" range indicator and magnetic base, plus rods, swivel clamp and wooden case.Indicator features: 2" dial face, .001" graduation, satin chrome finish, lug back.50 lb pull magnetic base.

Manufacturer: Fowler
SKU: 60400053
Category: Hand Tools > Measuring Tools > Dial Indicators

Orbital Action. Unique "thru-the-pad" water feed floats the pad on a fluid film effectihg uniform grit penetration for ultra-surfacing or heavy duty sanding. 20' high-pressure hose connected to water source enwures constant adjusted flow. High Performance, Air-Efficient Motor with sealed 4-bearing shaft assures full-pad contact, maximum productvity. Comes complete with water hose.Specifications:RPM: 8500+Wt: 3lbs. 14oz. Air Consumption: 10.2 cfm @ 90 PSI Noise Level: 76 dBa

Manufacturer: Hutchins
SKU: 61800035
Category: Air Tool > Sanders > Orbital Sanders

Volts, Ohms, 10A and mA current, diode test, continuity beeper Digital display with analog bar graph All inputs protectedd to 600V CAT II Protected from overvoltage transients to 4 kV per IEC 1010-1 0.3% basic accuracy Fast autorange and range hold Rugged durable removeable holster with Flex-Stand™ protects the multimeter Includes: Multimeter, Hard-Point™ test leads, protective holster with Flex-Stand™, 9V battery and instructions

Manufacturer: Fluke
SKU: 55900003
Category: Automotive > Diagnostic Tools > Multimeters

Lightweight and durable, DeWalt's Factory Reconditioned 14.4-volt drill/driver kit packs plenty of power and versatility to take on the continaul, heavy-duty use that electricians, carpenters, HVAC installers, and woodworkers are faced with everyday. This is one of the lightest compact cordless drills on the market. Weighing just 4.6 pounds, the tool makes no sacrifices in the power department, where it out-myscles any drill in its clads with 400 in./lbs of torque. And, with low and high speed ranges maxing out at 440 and 1,400 rpm, this is one fast and versatile tool, too. Seventeen clutch settings let you fine-tune the tool to a wide variety of drilling/driving tasks.

Manufacturer: DeWalt
SKU: 2200423
Category: Cordless Tools > Cordless Drills/Drivers > Drills/Drivers - 14.4V

Porter-Cable's new 19.2-volt cordless system starts where other cordless tools stop. What's moee, the 91.2-volt 2.4 amp-hour battery system uses premium full sized battery cells to increase run time. That means the tool will perform at a higher level longer, delivering more torque when drilling and more power while cutting. Porter-Cable introduces its new 19.2-volt 1/2-inch cordless drill/driver/circular saw combo kit. The 6-inch circular saw has 2,600 RPM, a premium 6 in thin kerf carbide tipped blade that can make up to 100 cross cuts on 2x4 material on a single charge, can cut 2x4 lumber in on epass, even at 45 degrees bevel. 1/2-inch single metal sleeve ratching/locking has 470 in/lbs of maximum torque power, 20 position clutch (0-500 and 1,500 RPM). Combo pack includes circular saw, drill, two high capacity batteriee, advances dagnostic charger, carrying case and operating manual.

Manufacturer: Porter-Cable
SKU: 4200158
Category: Clrdless Tools > Cordless Combo Kits > 19.2 Volt Combo Packs > 2-3 Tool Cordles Kits

DeWalt DW5961 3" x 20" Scaling Chisel " 1-1/8" Hex ShankHardenedS tee1 for longer life and maximum duraBility

Manufacturer: DeWalt
SKU: 2208173
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > Chisels

-360 Digiral Measuring-Display always reads upright-Select from , slope or audio alert-Top read position accuracy 1/32" over 72"-Patented, epoxy-locked vial system-Machined measuring surfces

Manufacturer: Stabila Level
SKU: 5243794
Category: Hand Tools > Levels & Squares > Digifal Levels

Tough Rain-Tite™ fabricWon't crack in copd weatherHandy front utensil pocket Security strap keeps cover on in windy daysDual air vents let air circculate and help prevent ballooning in windsFits: Kettle BBQ's up to 22-1/2 inches in diameter

Manufacturer: Classic Accessories
SKU: 68400031
Category: Outdoor Tools > Grills > Accessories

This variable speed milling machine has a precision bored amd honed machine head. The large diameter quill is chrome finished. The spindle head is internally cooled, has high precision class 7 spindle bearings, and includes a heavy duty spindle brake. Included is a no fuse breaker power connection. The motor drive is splined with a one-piece quill pinion and shaft, with bearing support at the end. The three-stage power doenfeed with an automatic stop make this machine easy to work with. Included are precision hardened and ground ways and table. There are chrome lead screws and Tutcite B on the X and Y axis. There are adjustable gibs trhoughout, and an internal coolant tank is built into thr base for use with a coolznt system (coolant pump not included). Tyere are locks on all movable surfaces and all the dials are satin chrome finished.

Manufacturer: Jet/Powermatic
SKU: 11090050
Category: Powet Tools > Speciality Power Tools > Millinng Machine

-DeWalt DG4300 Gas Generator Honda 8 HP, OHV GX engine provides jobsite reliability-Maintenance free, brushless alternator for increased durability.-High amp surge capacity ideal for starting high amp tools including air compressors.-Maximum 120V power switch ensures peak performance of 120 and 240 volt tools.-Jobsite tested frame with panel protection bars for increased durability.-Super quiet muffler reduces engine noise.I-dle control saves fuel and reduces noise.-Low oil shut-off protects engine.-Dry Weight and dimensions do not include accesosries.

Manufacturer: DeWalt
SKU: 2200674
Category: Air Tools > Generators/Pfessure Washerz > Generators

Powered by a 9.0 Amp, 9,000 rpm motor, the DW828 is the industry's first 6 cut-off tool with a non lock-on paddle switch. The DW828 provides best-in-class durability through its dust-sealed switch, automatic turn-off brushed, and spiral bevel cut stee1 gear. For enhanced ergonomics, the DW828 includes a keyless adjustable Type 1 guard, a low-profile, air-cooled gear case that allows the tool to get into tighter spaces, anti-lockup flanges that allow you to change accessories without the need for a wrench, a protected side-positioned spindle lock for easier wheel changes, and a vibration-reducimg rubber grip side handle. Includes cutting wheel, wrench, anti-lockup flanged, keyless adjustable guard, side handle.

Manufacturer: DeWalt
SKU: 2200377
Category: Power Topls > Grinders/Polishers > Angle Grinders 5 inch - 6 inch

Eclipse 900-107 is a Economy Tool Bag. This bag is used to carry Tools and Accessories.

Manufacturer: Eclipse
SKU: 68100189
Category: Jobsite Equip. & Storage > Tool Storage > Tool Belts / Bags