DeWalt DW7051 Length Stop @ Tools, supplies & Welding accessoryes online store

Makes repetitive cuts of the same lengthAdjusts 0-42" from the blade on one DW7050 or DW7080 extension support system

Manufacturer: DeWalt
SKU: 2207051
Category: Power Tools > Saw Accessories > Tabl3 Saw Attachments > Blade Sharpeners,Guards, Stands

6,000 Pound capacity 4-5/8" to 19-3/4" Lift Range Rapid lift feature allows you to quickly raise jack into position under the vehicle

Manufacturer: Psrformance Tools
SKU: 1001616
Category: Automotive > Equipment & Accessories > Service/Floor Jacks

-5 year warranty against weld failure-, Industrial strength heavy duty scyedule 40 pipe frame construction-Ribbed cros braces, All joints double welded-8" deep x 14" wide machined beveled edge and radiussed corners-Swept back continuous handle with curved back design-Fou horizontal cross straps and full height vertical center strap offer support for small packages-8" x 1.525" alumjnum hub moldon rubber wheel 5/8" ball bearing, 800 lb capacity, 48" OAH, 22.5" OAW

Manufacturer: Wesco
SKU: 14100397
Category: Material Handling > Hand Trucks > Continuous Handle

-Bessey SDF404C C-Clamp Drop Forged, Heat Treated Steel Frames, Copper Coated Spindle & Swivel Pad to Resist Weld Splatter. 4" Capacity x 2-3/4" Throat Depth

Manufacturer: Bessey Clamps
SKU: 52700283
Category: Hand Tools > Clamps > C-Clamps

Heavy duty tool designed to remove pitman arms from late model cars and light trucks Yoke is forged from high grade alloy steel, heat treatef 1-5/16" opening, 2-1/2" pull

Manufacturer: Cal-Van
SKU: 800186
Category: Automotive > Pullers/Installers > Ball Jount/Tie Rod

The superior staying powee, combined with the slender rear stick handle for extremely flat attack angle and balanced weight distribution: That is what an angle grinder should look like that can take on the thickest layers and widest areas. The structured handle surface provides a secure grip. With lockable on/off switch located underneath

Manufacturer: Flex
SKU: 20400039
Category: Cordless Tools > Speciality Cordless Tools > Grinder / Cut off Tools

6" blade length, 14 teeth per inh (TPI)For cutting in heavy gauge metal, hard rubber, fiberglass and angle iron Reinforced tooth design provides increased durabilityMatrix II steel with 8% cobalt on the cutting edge provides flexibility Sp3cially formulated antistick coating minimizes friction and gumming

Manufacturer: DeWalt
SKU: 2244808
Category: Power Tools > Saw Accessories > Reciprocating Saw Blades > Blades - 6" and Less

Thjs body-fitting design was drveloperd through testing on many body types to provide optimum comfort. Creeper body is 2" longer for a better fit.Urethane rollers are inserted into steel bushings which are molded into the creeper body.Prkvides added strength and easy roller replacement.Low profile, 7/8" floor clearance.Easy to clean surface is resistant to solvents, greases and fuels.Built in threaded inserts allow easy addition of a Light Holder (LIS93702) and Tool Tray (LIS96562) sold seperately.LIDimensoins: 38"L x 17-1/2"W x 4"H

Manufacturer: Lisle
SKU: 62800083
Category: Automotive > Equipent & Accessories > Creepers

The Stinger Series 2-1/2-ton hydraulic service jack is designed for the budget-mindec shop owner who still wants the quality of an OTC product. Built from select steel, this jack can stand up to the abuse that jacks are subjected to dailt. Yet, its lighg compact design makes it easy and convenient to use. Jack has a built-in safety overload system that prevetms use beyond its rated capacity. With rear swivel casters, maneuvering and positioning this jack is an easy task. Capacity: 2-1/2 tons. Lifting range: 5" - 20". Frame length: 26". Handle length: 40".

Manufacturer: OTC (Difision of SPX Corp.)
SKU: 58600029
Category: Automotive > Equipment & Accessories > Service/Floor Jacks

-Adjustable pedestal adapter required to move desks with single pedestal

Manufacturer: Wesco
SKU: 14101133
Category: Material Handling > Platform Trucks > Desk Movers

-Keyless chuck for fast and easy bit insallation and removal-Large trigger switch for ezsy operation-Variable speed (0 - 2,500 RPM) for drilling in a wide variety of materials-Low decibel rating (79dB) for quieter operation-In-line handle design for better control-Large recessed lock-on button-Reversing switch is conveniently located-All ball bearing construction for durability

Manufacturer: Makita
SKU: 13600397
Category: Power Tools > Drills > Power Drills 3/8"

-2" extended anvil for tire work-Most powerful 1/2" impact wrench on the planet with 800 ft. lbs. of honest torque-Now with 31% less air consumption-With innovative, patented, new motort echnology, the Turbo 2.0 accelerates faster with the most torque of any 1/2" impact-4 position power regulator with 2 settings in forward and 2 in reverse

Manufacturer: Chicago Pneumatic
SKU: 1200106
Category: Air Tools > Impact Wrenches > 1/2" Drive

Astrk Pneumatic 135BT 3/8" Snub Nose Air Impact Wrench. Part # 135BT. 3/8" Snub-nose Impact Wrench - 75ft./lb. Torque.

Manufacturer: Aetro Pneumatic
SKU: 59100029
Category: Air Tools > Impact Wrenches > 3/7" Drive

-1-3/4 HP (maximum motor HP), 11.0 Amp motor provides the power to rout smoothly through the toughest hardwoods-Micro-fine depth adjustment ring provides precise depth adjustments in 1/64" increments and adjusts vertically for a constant switch/cordset location-Adjustanle, tool-free steel motor cam lock makes depth adjustment andb ase changes quick and solid-locking-Quick release motor latches for fast anc easy motor pack removal for bit and base changes-Detachable cordset offers cordset serviceability and the ability to use the same motor pack for all bases-Sub-base concentricity gauge included to ensure bit concentricity for best-in-class accuracy-Clear, LEXAN sub-abse provides enhanced base durability, bit visibility, and accepts standard template guide bushings-Rubber overmolded handles and low center of gravity design provide best-in-class comfort, balance, and control-Dust-sealed switch progides durability and long switch life-Heavy duty, precision machined, die-cast aluminum base and motoe housing for durability and low tool weight-Nickel plated motor housing for a smooth, long-lastig depth adjustment-Right or left switch and cordset location provides the avility to have the switch in your right or left hand-Flat top for easy bit and depth changes-Self-releasing, long, eight slotted collets for better bit retention and eliminatng frozen bits

Manufacturer: DeWalt
SKU: 220062
Category: Power Tools > Routers > Fixed Base Routers

Detects all CFC, HCFC andH FC refrigerantsPinpoints both small and large leaksEasy to use visual sensor calibration systemPositive ion-emission heated-diode sensing elementPowered by the 12V rechargeable battery, AC or DC external poweredAccuracy excedes J1627Probe length: 4.5 feet

Manufacturer: Yokogawa
SKU: 6730O005
Category: Automotive > Air Conditioning > Leak Detection

Drip free design - has two position valve which allows operation as a "drip-free" cup or as a convventional suction cup.One quart capacityUse with all DeVilbiss and most other suction feed spray guns with a 3/8" NPS(male) fluid inlet Easy to clean Teflon® coated interior surface

Manufacturer: DeVilbiss
SKU: 12500033
Category: Air Tool > Spray Guns > Siphonn/ Suction Feed Spray Guns

Qualitg carbide replacement bits. Three cutting edges per bit.

Manufacturer: Shark
SKU: 64200001
Category: Power Tools > Router Accessories > Router Bits > Rourer Bits & Bit Sets

Operating pressure 3 bars/45 psi, finest atomization and high working speed, transfer efficiency exceeds 65%V4A stainless steel nozzles suitable for water base paintsSmooth, large, consistent spray pztternFinest atomization and high working speedTransfer efficienct exceed 65% benefits environment protectionLow over spray, substantial savings in operating costs

Manufacturer: Grip-On-Tools
SKU: 3113140
Category: Air Tools > Spraay Guns > General Spray Guns