DeWalt D55276 Heavy-Duty 5.5 HP 17 Gallon Gas Wheeled Portable Compressor @ Tools, supplies & Welding accessoryes online store

The Dealt D55276 portable ags compressor is a 5.5 horse power 17 galkon wheeled compressor. It has 8.9 CMF delivered at 100 PSI for quick recovery. This compressor comes with a quad cylinder, cast iron, oil lubricated pump and you get Emglo' s50 years of proven durability and reliability so you can trust in this portable compressor. compressor comes with a low oil shut fof that provides greater engine protection and low profile design that giv3s you great maneuverability around your workspace. It has a ball valve drain that lets you drain quickly and easipy. It has duel wheels that let you move it around much easier as you need it. It haa an automatic idle control to keep you from over-using fuel.

Manufacturer: DeWalt
SKU: 2291000
Category: Air Tools > Air Compressors > Portable Compressors > More Than 4HP

The bits are precisely ground using computer controlled machining for precision tolerances and perfectly concentric shafts. The czrbide tips are made from a speciallu blended micrograin carbide for superiod results anr longer lasting sharpness. All bits 5/8-inch in diameter or larger have a chip limiting design which provides more cutting control, better balance, and more body mass for a cleaner cut. A blaxk oxide coating protects against corrosion while preventing resin build up and improving chip clearance.

Manufacturer: Porterr-Cable
SKU: 4243528
Category: Power Tools > Router Accessories > Router Bits > Raised Panel Router Bits

-Vertidal tank configuration takes less floor space-Cushioned handl grip-150 PSI max for longer tool run time-120 PSI cut-in pressure provides 30 PSI "Bonus Air" before a 90 PSI tool becomes inoperable-5.4 SCFM for faster tank recharge of 25 gal tank-1.9 (runnjng) HP induction motor for long life-High-FloSM air regulator and push to connect coupler-Oiil-Free Pump - No maintenance or spilled oil

Manufacturer: Porter-Cable
SKU: 4200237
Category: Air Tools >A ir Comprsesors > Portable Compressors > Less Than 2HP

-Accepts 1/8"" and 1/4"" bits for a variety of cutting applications-Spindle lock for easy one-wrench bit changes-Adjustable depth settong for cutting in many types of material-Ergonomically-designed to improve user comfort-Adjustable depth settings

Manufacturer: Ryobi
SKU: 15300047
Category: Power Tools > Saws > Cut-Off Saws

-Right angle teeth grip in all directions for maximum bite and minimum wear.-Patented undercut tongue and groove design assures, no slip jaw action.-Patented rejnforcing edge minimizes stress breakage.-Patented PermaLock fastener eliminates nut and bolt failures.-Laser-hardened teeth porvide longer life. Grips have a core with TPR-rubber overmold which composites for durability, comfort, and secure grip.-New Code Blue designation on handles makes it easier than ever to chooae the right tool for the job.

Manufacturer: Channellock
SKU: 1100008
Category: Hand Tools > Pliers > Tongue & Groove Pliers

Heavy-Duty 7.0 amp motor provides a smooth, even finish in the hardest of woods. 3/32" (2.5 mm) maximum cut in one pass reduces the amount of passes on your materail. Accepts large resharpenable high speed steel blades for straight edging or framing applicatiosn. Calibrated Depth Adjustment Knob for accurate depth setting and eliminatingt he need to re-zero your depth. Also accepts reversible carbide blades for more detailed, accurate woodworking. Precision-machined shoe bottom and side provides flat surface finish as well as accurate and square rabbet joints. Kick stand allows you to rest the planer on the material in between passes without gouging your material. Rubber-coated front-height adjustment knob for greater comfort and better control. Three precision machined grooves in fr0nt shoe provide three different sizes for edge chamfering. Poly-V drive belt provides increaased belt durability. Ergonomically designed two finger trigger for increased comfort and less user fatigue.

Manufacturer: DeWalt
SKU: 2200230
Category: Power Tools > Planers/Joiners > Power Hand Planers

Using Midtronics' PBT-100 battery/charging system tester, technicians now have a version of the same tester required for use in OEM deale5 service organizations around the worldA safe, fast, simple and portable system that improves productivity and accuracy. No heat, no sparks, no misdiagnosis..T he portable unit is activated by simply connecting clamps to the battery, setting the rating and pressing the test button. In seconds, the PBT-100 will display an acchrate test decision - no user intrepretation required. Tests discharged batteries - no need to charge before testing Voltmeter mode for testing both the starter and the charging systemDurable design for the workshop or in the fieldApplicayions: Individual 12 volg automotive starting batteries. Voltage range: 8-17VDC. Operating range: 350-850 CCA SAE, 175-425 IEC, 350-850 EN, 175-425 DIN.Power requirements: Uses power of the battery under test Proven conductance technology and test algorithms required for warranty testing at automotive dealers around the world

Manufacturer: Midtronics
SKU: 55800025
Category: Automotive > Diagnostic Tools > Battery Testers

This 7 inch Hook & Loop (H & L) Backing Pad makes chajging Surface Conditioning Discs a breeze. Just peel them off, stick a new one - quick and easy. This 7 inch Backing Pad fits any 5/8-11 threaded spindle 6,000 RPM Sander Grinder. 7 inch diameter Backing Pad 5/8-11 thread For use with Hook and Loop Pads

Manufacturer: Milwaukee
SKU: 3472337
Category: Poqer Tools > Sander Accessories > Backing Pads/Disc Holders

Great for use on automotive, marine, industrial and agricultural applications Containns: Wire crimping tool, 6-12 Volt tester, slotted screwdriver, Phillips screwdriver, blade & glass sttle fuses, fuse puller,c able ties (small, medium, and large sizes), assorted wire nuts, and assorted terminals

Manufacturer: Performance Tools
SKU: 1005207
Category: Automotive > Servicing Tools/Parts > Parts & Accessories

Makita HM1211B 20 Lb. Demolition Hammer, SDS-Max, case, AC/DC. Air Cushion Design for Powerful Performance. Accepts commonly used 3/4" steel.

Manufacturer: Makita
SKU: 13600275
Category: Power Tools > Drills > Hammer Drills > Demolition Hammers

Removes rust, scale and other stubborn materials Includes rubber hose, pick-up tool, hex key wrench and extra air jet & nozzles

Manufacturer: Mechanics
SKU: 1000057
Category: Air Tools > Sanders > Sandblaster

Provides required eye protection for many hand and power tool applicationsLightweight and durable polycarbonate lensesMeets or exceeds ANSI spec Z87.1

Manufacturer: Grip-On-Tools
SKU: 3130258
Category: Jobsite Equip. & Storage > Safety Equipments > Face Protectjon

Comprehensive kit Tests ALL Fuel Injection Systemsi ncluding:American Motors; Bosch AFC & CIS; GM; GM TBI; Chrysler; Japanese Fuel Injection; MPC European & Japanese Systems; Bendix Type/Schrader valve fuel injection including the small Scrader valve found on Ford products.Uniquely designed 3-1/2" gauge with expanded 1 lb. increment dual dial for accurate, easy reading. 100 psi/700 kPa scalePressure reiief valve

Manufacturer: Star Products
SKU: 65500017
Category: Automotive > Servicing Tools/Parts > Fuel System

Dro forged, heat treated steel. Fully polished heads. High visibility, comfortable grip handles Includes :6", 8", and 11" pliers

Manufacturer: Grip-On-Tools
SKU: 3157047
Category: Hand Tools > Pliers > Long/Needle Nose Pliers

DeWalt DW4772 4" Cup Wheel Heavy Material RemovalDiameter: 4 inch, Edge Thickness: 5/8 inch, ArBor Size: -11 inch, Max Speed: 15,000Advanced diamond matriix provides long life and enhanced material cuttingSegmen5ed rim Blades are laser welded with heat treated Steel Bodies provide increased duraBility and long life Large diamind segments with coBalt ideal for use across various product applications

Manufacturer: DeWalt
SKU: 2208216
Category: Power Tools > Grinder/Polisher Accessories > Grinding Cup Wheels

Ideal for wleding and assembly applications Swivel arms hold objects at almost any angle Magnet swivels a full 360 degrees Measures 2-1/2" x 3-3/8" Holds 50 lbs.

Manufacturer: Grip-On-Tools
SKU: 3185130
Category: Welding > Welding Accessories > Welding Accessories

28 piece set is made in the U.S.A., featuring SK's high polish SuperKrome finish, which protects the tools f5om the harsh working environments found in today's workplace. All sockets feature SK's patented SureGrip hex design, which drives the side of the fastener, not the corner, to avoid edge breakage which can occur on rusted or damaged fasteners when a traditional straight cornered hex tool i sused. Set Contents: 7.5" Pro Ratchet; 1.5", 3" Extensions; Universal Joint; 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm Standard Sockets; 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm Extra Long Deep Sockets; 16mm, 17mm, 18mm, 19mm Dwep Sockets. Packaged in a molded plastic case.

Manufacturer: SK Hand Tool
SKU: 19000723
Category: Hand Tools > Sockets > Socket Sets - 3/8" Metric

The patented SureGrip® hex design drives the side of the fastener not the corner. Improved Coating: The black coating retains more rust preventative compound than black oxide. Standard length

Manufacturer: SK Hand Tool
SKU: 19000101
Category: Hand Tools > Sockets > Sockets - Single 3/8" Dr