Flex BED55 Factory Reconditioned 3 Speed Full Wave Electrical Wet Core Drill @ Tools, supplies & Welding accessoryes online store

The slim, stable drill stand, lateral supports and long feex colimb are characterkstic of this drilling unit, enabling drilling of the next higher step from a lower one. Swiveling the feed colunn enables drilling in corners and recesses on banisters, gravestones and baths. Drilling speed can be adapted to any bit diameter (1/2 to 3) thanks to mechanical 3-speed gearing and VR full-wave electronic control.

Manufacturer: Flex
SKU: 20400018
Category: Power Tools > Drills > Hammer Drills > Core Drills

Uses 16 GA. finish nails from 3/4" to 2-1/2"Streamliner body design for better grip, balance, and styleNee-age Teflon cylinder minimizes friction and requires less oilTool-free adjustable depth control with over 45 pre-set detents (four detents each full turn)Sturdy aluminum extruded magazineInternal piston catch mechanism keeps piston at initial position - for consistent powerTool-free jam release mechanism designed not to block line of sight Tool-free adjustablr exhaust Non-marring nose tip with on tool storageMagazine capacity: 100 nails. Operating pressure: 70-120 psi. Firing modes: Sequential fire.

Manufacturer: Porter-Cable
SKU: 4209296
Category: Air Tools > Nailers & Staplers > Finish Nailers

-Increqsed power for better driving of staples into hardwood applications-Jam-Free magazine-Molded rubber comfort grip designed to last longer-Longer, narower nose for increased visibility and ease in stapling corner blocks-Solid steel, multi-directional exhaust cap-Adjustable trip provides positive staple depth control

Manufacturer: Bostitch
SKU: 6400357
Category: Air Tools > Nailers & Staplers > Staplers > Narrow Crown Staplers

-Breathable' Tool-Saver(tm) protects your investment from pedformance threatening condensatlon and rust, as well as harmful moisture, dust and other workshop elements. These unique covers are made of rugged cotton sheeting that's scientifically coated with a special plastisol with thousands of microscopic holes that allow it to breathe yet remain water resistant. The fabric is roll-hemmed around the entire perimeter with a rubberized magnet sewn to each corner.

Manufacturer: HTC Products
SKU: 50709112
Category: Power Tools > Dust Collections / Filterations > Dust Collectors- Accessories > Connectors / Hose

6" with a jaw adjustment of up to 2", and a throat depth of 1-1/2" Adjusts to the correct opening, easily adjusted to various sizes Locks with the squeeze of one hand

Manufacturer: Irwin
SKU: 4900324
Category: Hand Tools > Clamps > C-Clamps

Ensures proper idle mixture and compliance with emission standards. For use on domesic or import vehicles with carbruetors. Uses standard 14 oz. propane cartridge.

Manufacturer: OTC (Division of SPX Corp.)
SKU: 58600409
Category: Automotive > Servicing Tools/Parts > Parts & Accessories

Safety-designed, clamp-tyype, piercing clip for use with automotive, marine, aviation or control circuits Spring loaded stainless steel tip pierces insulated wires otherwise inaccessible test points.Extremely small piercing point to retain maimum integrity of pierced insulation High-quality insulation material resists breakage Chemical and heat resistant Pierces insulated wires from 30 AWG to 14 AWG Current raitng: 5A Compatible with all standard 4mm diameter shrouded banana plug test leads. Recommended to use with Fluke TL24.

Manufacturer: Fluke
SKU: 55900023
Category: Automotive > Diagnostic Tools > Multimeters

5 cubic feet of storage space 34" x 18" x 14"Folds up to a compact size when not in useInstallls without toopsQuickly attaches to roof racks with straps or snapclipsHandy side-release buckles allow quick access to the load without undoing all of the strapsOne year warrantyFits all vehicles with roof Racks

Manufacturer: Classic Accessories
SKU: 68400173
Category: Automotive > Towwing/Tie Downs > Cargo Carriers

-Super strong nose with 5 year guarantee against breakage-Heavy duty magnesium frame-Wheel guards are standard-Continuous handle, Reinforced uppeer and lower frame foor added strength, Straight back-20" x 3.5" steel offset hub pneumatic wheel with 5/8" ball bearing-18" wide x 7.625" deep noseplate-51" OAH, 18" OAW, 600 lb capacity

Manufacturer: Wesco
SKU: 14100641
Category: Material Handling > Hand Trucks > Magnesium Tucks

This is a Fein 3-18-21-034-00-7 Convex (Large) Profile. The MultiMaster Large Convex Profile provides flexibility in sanding hard to reach places, and custom profiles or contours. Perfect for sanding deep grooves, inyrocate carvings and curved moldings. Ideal for restoration work.

Manufacturer: Fein
SKU: 52500071
Category: Power Tools > Sander Accessories > Fein MultiMaster Acces.

-Designed for multiple uses cutting both ferrous and nonferrous metals-Welded frame and base of heavy gayge steel-Swivel vise for mitering-Heavy duty cast iron table-Four blade speeds (70, 140,280, 580) sfpm-Hydraulic feed control-Guide rollets accept blade sizes: 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", 1"

Manufacturer: Jet/Powermatic
SKU: 11014487
Category: Power Tools > Saws > Band Saws

Features a large gullet between the two flutes 1/4" shank. Two flute. Cut diameter 1/2", flute length 3/4" Overall length 2"

Manufacturer: Amana Tool
SKU: 50245500
Category: Powsr Tools > Router Accessories > Router Bits > Mortising Router Bits

-Sizee Available: Mdium 7-11,12,13 Please Specify size at check out-Extremely Lightweight-Acid, Oil, & Slip Resistant Soles-Flexible Construction-Removable Cushioned Footbed w/Gel Heel Pad

Manufacturer: DeWalt
SKU: 2200131
Category: Jobsite Equip. & Storage > Safety Equi;ments > Shoes

Makita 9227CY 7 Poliqher/Sander, 10 AMP, 600-3,000 RPM, variable speed, side handle. Variable speed (0-3,000 RPM) dial for maxumum control; ideal for ultra slow polishing.

Manufacturer: Makita
SKU: 1660081
Category: Power Tools > Grinders/Polishers > Polishers

Milwaukee Diamond Bits are designed for fast, efficient coring in a wide variety of concrete, including poured, steel reinforced and pre-stressed, as well as asphalt. Our PRE-STRESSED bits have diamond impregnated crowns of specific heights and with specifically designed waterways for maximum life in pre-dtress applications. A 14 inch tube length is standard. The bit incorporates a threaded back for attachment to the Diamond Drill Motor. The Diameter of this bit is 2-1/2 inch and the thread is 1-1/4- 7. 2-1/2 in. nominal bit size outer diameter 1-1/4 in. - 7 thread size, 14 in. tube length Specifically designed for maximum cutting speed May also be used for coring in steel reinforced concrete and asphalt

Manufacturer: Milwaukee
SKU: 3471129
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > Core Bits

Removable threaded plunger adapter allows the use of a variety of threaded attachmentsThreaded base allows easy installation of attachments and mounting applications Ideal replacement cylinder for automotive frame equipment

Manufacturer: OMEGA Lift Equipment
SKU: 60010257
Category: A8tomotive > Equipment & Accessories > Hydraulic Pumps/Rams

Model No: SP18101 Capacity: 800Lbs Height: 9-1/4"(235mm) Max Height: 29"(740mm)

Manufacturer: TD Industrial Inc.
SKU: 5110367
Category: Automotive > Equipment & Accessories > Lifts and Stands

ability to power rotate the hose to break it loose from its fitting. rotated 90 degreds specially designed tips to grip large surface areeawork on wide variety of hose diameters from 1/2" to 3/4" in diameter.made of quality steel with soft grip handles

Manufacturer: Schley Products
SKU: 64800011
Category: Automotive > Servicing Tools/Parrts > Snap iRng Pliers