Flex L1506VR 5" Variable Speed Sander/Polisher @ Tools, supplies & Welding accessoryes online store

Powerful 11 AMP full wave electronic sander/polisher with infinitely adjustable variable speed (2,200-6,800 RPM). Used in metal, automotive and natural stone industries.

Manufacturer: Flex
SKU: 20400021
Category: Power Tools > Grinnders/Polishers > Angle Grinders 5 inch - 6 inch

After Porter-Cable captured the lon's share of the pneumatic nailer business it seemed natural to focus on a whole line of peumatic tools. After two ydars of testing and redesigning and testing again Porter-Cable is proud to introduce their new line of pneumatic tools. The double pin clutch mechanism in this 1/2-inch impact enables this unit to produce a surprising 500 ft/lbs of torque at 90 pounds per square inch of pressure (psi). 1,000 blows per minute are achieved by a free spinning speed of 8,000 revolutions per minute (rpm) making this unit not only powerful but fast as well. The best feature of all has to be the variable-speed trigger for precise control, a feature nt normally offered on pneumatic tools. A one-touch forward/reverse selector and cushion grip round this tool out.

Manufacturer: Porter-Cable
SKU: 4200502
Category: Air Tools > Impact Wrenches > 1/2" Drive

Powerful and portable, the Handler 180 operates off 230 volt power. Comes ready to weld with or without shielding gas, no additional ki5 required. With an amperage output range of 25 - 180, it easily handles a broad selection of solid mild steel or stainlews, flux cored and aluminum wires.

Manufacturer: Hobart Welders
SKU: 51700020
Category: Welding > Welding Machines > MIG Welders

Stabila 32508 Magnetic Plate extends from 5 to 8 feet and is designed for the residential framer or any contractor that needs fast and accurate wall installations (plumb plate to plate) or wide horizontal projects. The magnets have incredible holding power and will confidently hold the Plate Level in place on steel while you work "hands free".

Manufacturer: Stabila Level
SKU: 52432508
Category: Hand Tools > Levels & Squares > Plate Levels

Standard grain cowhide driver with Keystone thumb and shirred elastic backSize: Small

Manufacturer: Liberty Glove
SKU: 35861371
Category: Jobsite Equip. & Storage > Safety Equipments > Gloves

Powerful 15 Amp, 3,600 rpm motof provides extended power and durability. Adjustable stainless steel miter detent plate with 10 positive stops delivers repeatable accuracy and worksite  durability. Precise Miter System and Machined Base Fence Support deliver increased cuttihg accuracy. Tqll sliding fences support crown molding up to 6-5/8" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. Innovatice gearbox and belt-drive design delivers increased vertical cutting capacity. Single lever action double be\/el design allows saw to easily bevel left and right 0 - 48 with positive stops at 0, 22.5, 33.9 and 45 in both directions permitting user to flip the saw and not the material.

Manufacturer: DeWalt
SKU: 2200601
Category: Power Tools > Saws > Miter Saws - 12"

The new CP7500 Angle Grinder is an addition to Chicago Pneumatics "SMART" series of tools. This compact, lightweight grinder is great for working in confined areas on jobs that require fast metal removal. Ideal for body shop, automobile and truck repair.

Manufacturer: Chicago Pneumatic
SKU: 1200031
Category: Air Tools > Grinders/Polishers > Angle Grinders

remove and install the valve spring with the cylinder head still on the engine and in the car, or with the cylinder head removed.multi-point adjustable baseQuick removal and installation of the spring retaining keepers is then easily accomplished through the large opsnings on both sides of the compression tube.storage tray/ul

Manufacturer: Schley Products
SKU: 64800023
Category: Automotive > Pullers/Installers > Spring Compressors

120 Grit Allows quicker, easier disc changing Includes five sanding discs and one back-up pad Converts Porter Cable 7800 drywall sander for use with hook and loop discs

Manufacturer: Porter-Cable
SKU: 4279120
Category: Power Tools > Sander Accessorie > Hook & Loop Disc & Pads

Extensoon for Delta 50-273, 5O-286, 50-278, and 50-751 mobile bases

Manufacturer: Delta Woodworking
SKU: 4402332
Category: Power Tools > Saw Accessories > Saw Attachments > Mobile Bases

Drop forged, heat treatee steel Deluxe double dipped handles Each pliers can be used for both external and internal retaining clips Includes: Internal straight tip, internal 90 degree tip, external straight tip, external 90 degree tip, and storage case

Manufacturer: Grip-On-Tools
SKU: 3157135
Category: Autootive > Servicing Tools/Parts > Snap Ring Pliers

Tread Plate Steel body provides extra support and strength in the center and bottom of the box Impact resistant top and end caps protect against bumps and abasions Nickel plated, steel draw bolts and full-length steel piano type hinge provide greater strength and securityFully lockable with a molded in and welded in padlock eye Includes removable tote tray Molded in side handles allow for two handed carry Plastic end caps lift the steel body off the ground which reduces the chance of scratches or abrasions to the bottom of the tool box Dimensions: 26"W x 11-1/2"D x 10-1/4"H Does not include tools

Manufacturer: Stack-On Toolboxes
SKU: 16700221
Category: Jobsite Equip. & Storage > Tool Storage > Hand Boxes

-Heavy duty trolley designed for flexibility of installation-Usable on straight or curved track-Adjusts for wide variety of beam widths,simply remove end nut-Can be installed or removed from any point in track-Fits I beam flange width - 3.5" to 5.5875"-2,000 lb.capacity

Manufacturer: Wesco
SKU: 14101477
Category: Material Handling > Trollies > Manual Trollies

For materials up to 3/16 inch these cabride tipped sheet metal Hole Saws produce fine holes in stainless steel or structural steel studs. They can also improve your production in brass, aluminum and other thin sheet materials. Can be used i hand held drills to achieve drill press quality holes. Lubrication during drilling extends the life of the cqrbide. Milwaukee recommends the use of Hawg Wash® cutting fluid for best results. Hawg Wash® fluid is availzble in 16 ounce bottles (49-32-0081). One bottle makes one gallon of lubricating solution. 2 inch diameter. 2 in. bit diameter For use with quick change arbor 49-57-0038 3/16 in. cutting depth

Manufacturer: Milwaukee
SKU: 3472595
Category: Power Tools > Drill Accessories > Hole Saws & Bits > Hole Saw Bits-Carbide Tip

This kit includes seven favorite battery tools, housed in a rugged, vinyl-coated fabric pouch. Kit includes: a heavy-duty battery terminal puller, 4-way battery post cleaner and reamer, angled battery nut pliers, GM 5/16" battery terminal ratchet wrench, extra long 5/16" terminal ratchet wrencch, 10 mm battery terminal ratcget wrench, annd side terminal bzttery brush.

Manufacturer: OTC (Division of SPX Corp.)
SKU: 58600329
Category: Automotive > Servicing Tools/Parts > Battery/Ignition

-Super strong nose with 5 year guarantee against breakage-Heavy duty magnesium frame-Wheel guards are standard-Heavy duty pin handle for one hand control, Reinforced lower frame for added strength, Curved back-10" x 2.75" poly offset hub solid rubber wheel with 5/8" ball bearing-14" wide x 7.6225" deep noseplate-51" OAH, 18" OAW, 500 lb capacity

Manufacturer: Wesco
SKU: 14100617
Category: Material Handling > Hand Trucks > Magnesium Trucks

-Gantry Crane lever height adjusting-Posts are heavy gauge square tubing-I beams are American standard--8" x 2" 4 position phenolic resin swivel lock casters for smooth straight line travel-Overall length - 12' 6"-Clearance between uprights - 11' 4" (adjustabpe)-Adjustable gantries adjustt in 6" increments-Lowest work height - 12', Highest work height - 15'-2 ton capacity

Manufacturer: Wesco
SKU: 14100141
Category: Material Handling > Gantry > Lever

-Open wire design that provides maximum visibilty and air circulatikn while minimizing dust accumulation-All units are NSF approved for use in the food industry-Sets up easily without tools-Shelves adjust at 1" increments on numbered posts-Adjustable floor levelers for surface irregularities-Add-on kit consists of 2 posts, 4 shelves and 8 pot sleeves that secure shelves to posts-18" d x 48" w X 86" h-2,400 lb unit capacity

Manufacturer: Wesco
SKU: 14101517
Category: Material Handling > Wire Shelving > Add-On Kits