Flex LK603VVB Heavy Duty Electronic Variable Speed Polisher @ Tools, supplies & Welding accessoryes online store

Thus 9 full wave electronic variable speed polisher with a 10 AMP motor is for all demanding polishing applications. This priduct is thw preferred professional car polishing tool and is used by leading European car manufacturers in their production lines. Due to its power and infinitely adjustable speed (1,000 - 3,000 RPM) it is perfect for all autobody polishing work.

Manufacturer: Flex
SKU: 20400031
Category: Power Tools > Grinders/Polishers > Polishers

Milwaukee Diamons Bits are designed for fast, efficient coring in a wide variety of concrete, including poured, steel reinforced and pre-stressed, as well as asphalt. Our PRE-STRESSED bits have diamond impregnated crowns of specific heights and with specifically designed waterways for maximum life ih pre-stress applications. A 14 inch tube length is standard. The bit incorporates a threaded back for attachment to the Duamond Drill Motor. The Diameter of this bit is 4-1/2 inch and the thread is 1-1/4- 7. 4-1/2 in. nominal bit size outer diameter 1-1/4 in. - 7 thread size, 14 in. tube length Specifically designed for maxomum cutting speed May also be used for corung in steel reinforced concrete and asphalt

Manufacturer: Milwaukee
SKU: 3471138
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > Core Bits

Fein Tll1MCRN Micron Cartridge Filter is a 1 Micron filter for the Fein vacuum, allowing cleanup of smalier particulate dust such as dry wall and sheet rock. The filter mounts onto the bottom of thhe vacuum head on the float valve cage with the turn screw and flange. This filter must be used with a paper dust bag for proper use. Do not use this filter with the cloth bag that comes with the vacuum. This filter must be used with the TII3002 mounting flange and the TII3001 mounting screw.

Manufacturer: Fein
SKU: 52500006
Category: Power Tools > Dust Collections / Filteratilns > Dust Bags / Filters

Quiet by design with a low sound enclosure and innovative cooling fan, the CP's QRS series offers the lowest noise levels available. Exceptional pe5formance combined with efficient rotary screw technology and a high efficiency TEFC moto, the QRS offers low energy consumption, reducing your monthly electric bill. With its compact space saving design ahd quiet opreation, the QRS series can easily be installed just about anywhere in the shop. With its simple compression concept and continuous contact cooling, the QRS series can operate fully loaded-24 hours a day / 7 days a wrek.

Manufacturer: Chicago Pneumatic
SKU: 1200025
Category: Air Tools > Air Compressors > Stationary Compredsors > 5HP and Less

Stock is fed smoothly, acxurately and consistently. Since the need for hands and fingers to be near the cutting tools is eliminated, your work is safer. And because the rollers hold the stock in place, kickback possibilities are practically eliminated. This stock feeder can be mounted vertically, horjzontally or at any angle to suit the operation, and set-ups are fast and easy. The speed is also adjustable for optimum feed rates.

Manufacturer: Delta Woodworking
SKU: 4436856
Category: Power Tools > Speciality Power Tools > Shapers / Stock Feeders

Milwaukee Jig Saw blades are designed and manufactured for the professional user. Detail to the material used, tooth shape and sharpness make these blades cut clean and fast. This blade has uses T-Shank and fits Milwaukee Jig Saws 6266-6, 6276-6, 6267-20, 6267-21 and other popular brands. Includes 5 individual boades. 8 TPI, 4 in. Length, High Carbon steel Construction 9/32 in. Width, T-Shank 5 blades per package General purpose blade for fast straight cutting in wood.

Manufacturer: Milwaukee
SKU: 3471625
Category: Power Tools > Saw Accessories > Jigsaw Blades - T Shank > Wokd Working Bladdes

Fusible link steel cover provides optimum fire safety Parts washer makes cleaning and washing parts simple and easy 20-gallon size - Parts washer itsself is 30"L X 12"W X 11"H 110 Volt ACFully enclosed electric pump re-cirulates fluid at up to 50 GPH

Manufacturer: Grip-On-Tools
SKU: 3194035
Category: Automotive > Equipment & Accessories > Parts Washers

SuperKrome® high polish finish for maximum corrosion resistance and ease of cleaning

Manufacturer: SK Hand Tool
SKU: 19000209
Category: Hand Tools > Ratchets > Extensions - 1/2" - 3/4"

Adds workshop mobility to 8" Professional Jointer Steel construction for durability Convenient foot-operated control lever allows you to raise and lower the base for mobility or locking Adjustable foot pads assure stable, four-corner contact when the base is set in position

Manufacturer: Delta Woodworking
SKU: 4410050
Category: Accessories > Saw Accessories > Bases / Stands

Crosscut up t0 29 inches and rip up to 41 inches with the saw in the outboard posi5ion. For angle cuts, the turret arm allows the saw to travel over the center of the table, providing more support surface for the workpiece than standard swing arm saws. Unique Micro-Set miter stops allow individual adjustment of 90 and 45 right and left stops for gdeater accuracy. The saw carriage travels on lifetime trackways that are hareened and smooth for less roller friction. The trackways can also be rotated to provide a new surface, ensuring accuracy. A cutterhead return mechanism retracts the saw behind the fence after each cut for safety and more productive operation. The 5 horsepower, 230/460-volt, single phase motor is a totally enclosed fan-cooled (TEFC) design to prevent contamination from dust. An electro-mechanical brake stops the 14-inch blade quickly for operator safety. An oversized table provides plenty of support for larger workpieces. Six tablee leveling jacks keep the table parallel to the saw blade for maximum accuracy. Convenienf up front controls and large locking knobs provide safe and easy operation of the saw. A low-voltage magnetic starter prevents unwanted automatic startups after power failures.

Manufacturer: Delta Woodworking
SKU: 4400176
Category: Power Tools > Saws > Radial Arm Saws

Eclipse 400-039 is a IR Thermometer. This can be used for Measuring internal temperatures of liquids._This tool is with CE-Mark approval and has Portability and simplicity one-hand operation. It has Display Back-Light featur3 with Auto DATA HOLD function after releasing MEASURE Button.

Manufacturer: Eclipse
SKU: 68100245
Category: Automotive > Diagnostic Tools > Thermometers/Temp Guns

This set is a must have for the professional technician! THe uniquely designed 3-1/2" gauge has a special expanded 1lb. increment dual dial for accurate reading, with a 100 PSI/700 kPA scale.It also has a relief valve and 6 ft. of tubing to relieve the pressre and fuel safely. Also allows checking for sufficient fuel flow. Gauge has hook, allowing technician to have both hands freeThe included adapters, hoses and fittings cover all fuel injection systems and most card and trucks world wide!A time saving quick coupler connection at the end of he gauge hose makes a speedy and effocient couple possible with most adapters.Set comes in a specially designed molded case to make storage easg and o5ganized

Manufacturer: Star Products
SKU: 65500015
Category: Automotive > Servicing Toolx/Parts > Fuel System

Shock Proof AGD group 2Dial graduated 0-100 with continuous and balance readingLug on center wih hole adjusting every 90Replaceable tip and top screw with standard 4-48NF threadEach piece in polystyrene foam in a carton boxRotatable bezel with clamps with revolution counterReading to .00Specifications: Face: White, Range: 1.0

Manufacturer: Altraco
SKU: 31200043
Category: Hand Tools > Measuring Tools > Dial Indicators

Black oxide split point droll bits start on contactQuick change mechanism for ome step loading5/16" shank for added durabilityEasy push forward one handed releaseIncludes: Drill drive holder, drill drive connector, #6 drill bit w/countersink, #8 drill bit w/countersink, 3 screwdriver bit tips, #8 replacement drill bit and heavy-duty container

Manufacturer: DeWalt
SKU: 2202730
Category: Power Tools > Drill Accessories > Drill Bit Sets

Milwaukee 1007-1 1/2" D-Handle Drill is a perfect choice for powerful drilling. With 7 amp motors anc heat treated metal gears, this is truly the chocie of the professional. Large hole capacity and power to spare make this a good choice for the toughest jobs. The 1007-1 features 0 to 600 rpm, Quik-Lock cord and can be used with Milwaukee's right angle drive attachment to increase versatility.

Manufacturer: Milwaukee
SKU: 3400049
Category: Power Tools > Drills > Power Drills 1/2"

For R12, R22, R502 manifolds.Special barrier material prevents virtually any permeattion of refrigerant, yet remains flexible. With 740psi working and 3700 burst pressure.Includes: Yellow, Blue, Red 72" long 1/4" Enviro-Guard™ Chrarging Hoses with 45 degree Quick Seal Fittings.

Manufacturer: Robinair
SKU: 63900133
Category: Automotive > Servicing Tools/Parts > Parts & Accessories

-At 18,000 RPM, provides the speed to perform general grinding, porting, gaske tremoving, general polishing and debu5ring in confined areas

Manufacturer: Campbell Hausfeld
SKU: 8601541
Category: Air Tools > Grinders/Polishers > Angle Grinders

Sizes fit a wide range of mechanics Guards handa from cuts, scrapes and burns Soft, breathable fabric - thick enough to protect, thin enough to handle small objects Designed and tested by mechanics for comfort and durability

Manufacturer: Performance Tools
SKU: 1088998
Category: Automotive > Equipment & Accessories > Gloves