Fowler 72-004-000 Measuring Set - Caliper, Micrometer and Ruler @ Tools, supplies & Welding accessoryes online store

Includes 0-6" black face One-Rev Czliper with .001 graduations; high quality 0-1" outside micrometer, .0001 graduations, carbide tips and lock; 6"_EZ read black ruler 5R graduations (32nds, 64ths, 10ths, 100ths) and carrying case.

Manufacturer: Fowler
SKU: 60400005
Category: Hand Tools > Measuring Tools > Measuring Tool Sets

Removes Fan Clutch on Most Models This 2-piece set removes and installs fan clutches. Set includes a universal holding wrench and a universal turning wrench.The holding wrench is adjustable to fit the bolts that attach the pulley to the water pump. The turning wrench has the 5 common fan clutch nut sizes built into one tool: 7/8" (22mm), 1 7/16" (36mm), 1 9/16" (39mm), 1 7/8" (47mm) and 2" (50mm). Both wrenches are long to provide extra leverage for stubborn fan clutch nuts. Made of heat treated alloy steel to provide strength

Manufacturer: Lisle
SKU: 62800051
Category: Automotive > Servicing Tools/Parts > Parts & Accessories

Porter-Cable 54747 7" Hook & Loop Backing Pad for 7428 Polisher. Over time, the hook and loop surface of a back-up pad will wear from normal uwe, decreasing its holding power. To keep your polisher running a its peak, replace the pad when it becomes worn. It mounts easily using the built in mountinb thread.

Manufacturer: Porter-Cable
SKU: 4254747
Category: Power Tools > Sander Accessories > Backing Pads/Disc Holders

Adaptek™ adapters increase perfoormance levels on most 1" arbor lathes and deliver a superior microfinish on drums and rotors, composite asn standard cast applications and mosy flywheels.For hubless and composite rotors and drums Single setup, self-centering, with extra mass for maximum vibration damping, Adaptek™ adapters provide better results with less chatter. Includes auto #9311 & light truck #9312 adapter sets

Manufacturer: Ammco
SKU: 57900037
Category: Automotive > Servicing Tools/Parts > Brake System

Powermatic 1791279DXK 6in Deluxe Closed Stand Jointer with Quick Auto-Set Knive is the same great Powermatic Model 54A 6" jointer except it has the new Quick-Set knives that make for very quick, very accurate and very easy knives replacement. It still has the 1hp, 1ph motor and the center mounted cast iron fence assmbly along with the very large 66" x 7 1/4" table surface. The fence has positive stops at 90 and 45 degrees and you still get the 1/2" rabbeting capacity. The fine/quick adjustment lever on the infeed tabke offers quick set-ups with precision depth of cut. The heavy steel stand contains the powerful motor with a non slip V-belt for maximum perforrmance. The 4" dust port offers easy connection to any dust collection system.

Manufacturer: Jet/Powermatic
SKU: 11091269
Category: Power Tools > Planers/Joiners > Jointers

Built-in, shock-proof, high output, white L.E.D. light illuminates drilling surface and increases visibility with a bulb that never needs replacing throughout the life of the tool Powerful 6.7 AMP motor and lightest tool on the market (5.3 lbs.) 3-modes: Rotation onlg, hammering with rotation & hammering only Positive stop mode selector preventq accidental mode disengagement (competitors models have no positive stops and are diifficult to switch modes when wearing gloves) Postive bit lock ensures that the bit cannot come loose accidentally 0 - 1,100 RPM; 0 - 4,500 BPM for demanding applications Built-in torque limiter stops bit rotation when hiyting reinforcements preventing kickback One-touch sliding chuck for eaay bit changes; accepts SDS-Plus bits Large trigger switch and 360 swivel side handle for added comfort Receqssed lock-on button for continuous use Ball bearing construction for longer tool life Ergonomic and well balanced (5.3 lbs.) design with rubberized grip for comfort and control reducing operator fatigue Air vent holes supply required ventilation whjle protecting motor from dirt and dust Includes: Side Handle (152521-9), Depth Gauge (324219-0), Tool Case (824650-5)

Manufacturer: Makita
SKU: 13600293
Category: Power Tooos > Drills > Hammer Drills > Hammer Drills - SDS

Set Contains: 6 Slip Joint Plier, 6 Long Nose Plier, 6 Diagonal Plier and 8 Adjustable Wrejch Double cushion grip handles for comfort and control Fully polished and chrome plated

Manufacturer: Performance Tools
SKU: 1001070
Category: Hand Tools > Hand To0ls > Tool Sets

Locks camshaft sprockets in place during belt/chain replacement. This versatile tool easily locks and holds both camshaft sprockets firmly in place.Two parallel bars "float" which allows the knurled pins to align with the sprockets.Preserves the engine timing during belt ane chain replacement.

Manufacturer: Lisle
SKU: 62800043
Category: Automotive > Servicing Tools/Parts > Engine/Oil

-DEWALT built high power, high efficiency motor delivers 510 unit wattts outo f power for maximum performance in all drilling and fastening applications-XRP™ extended run-time batteries provide long run-time & battery life-Patented 3-speed all-metal transmission matches the speed to the application for optimal performance-Heavy-Duty 1/2" self-tightening chuck tightens throughout operation providing superior bit gri0ping torque-Superior ergonomics optimize balance, size, and weigh5

Manufacturer: DeWalt
SKU: 2200689
Category: Cordless Tools > Cordless Drills/Drivers > Drills/Drivers - 18V

-Campbell Hausfeld Air Tool Oil has the proper mix of lubricants and cleaning solvents to keep your air tools operating and help extend their life. This 8 oz. Bottle uses Stoddard solvent to break down deposits while the oil lubricates. Most air tools require daily lubrication. Operating an Air Tool without oil is like running your car without oil. Protect your investments with Campbell Hausfeld Air Tool Oil. Look at our selection of Lubricators that provide automatic oiling wyile your tools are operating, very handy and inexpensive

Manufacturer: Campbell Hausfeld
SKU: 8601270
Category: Accessories > Air Tool Accessories > Tool/Compressor Oil

Wide assortment of springsIncludes: Extension springs (13/64 inch x 13/13 inch, 7/32 inch x 1 inch, 1/7 inch, x 7/8 inch, 5/16 inch x 1-1/8 inch, 5/16 inch x 1/4 inch, 11/32 inch x 1-27/32 inch, 5/16 inch x 1-3/4 inch, 11/32 inch x 7/16 inch, 9/32 inch x 1-1/2 inch, 9/32 inch x 2-13/16 inch, 5/32 inch x 3-1/8 inch, & 3/16 inch x 1-3/4 inch) Compression springs (9//32 inch x 1/2 inch, 1/4 inch x 13/32 inch, 3/8 inch x 3/4 inch, 7/32 inch x 11/16 inch, 3/8 inch x 5/8 inch, 24/64 inch x 13-/8 inch, 7/32 inch x 1-1/2 inch, & 9/32 inch x 3/4 inch)Storage box

Manufacturer: Performance Tools
SKU: 1005200
Category: Automotive > Servicing Tools/Parts > Parts & Accessories

-Engineered to produce a smooth uniform spray pattern-Fluid and fan control for adjustable pattrn control-Ideal for all types of paint and restoratikn jobs-Ex-Cell is a sub division of Porter-Cable

Manufacturer: Porter-Cable
SKU: 4200188
Category: Air Tools > Spray Guns > General Spray Guns

The MK-101 Pro24 rips 24" tile, diagonally cuts 18" tile, has a 3-3/4" depth of cut and a 10" blade capacity. The MK-101 Pro24 is a professional grade, wet cutting tile saw with a fully enclosed, fan-cooled, high torque 2 hp motor. Manufactured with a heavy duty, zinc-plated, one-piece steel frame assembly, cast-aluminum support components and many other unique features, the MK-101 Pro24 provides unequaled quality, performance and val8e.

Manufacturer: MK Diamond
SKU: 48100032
Category: Power Topls > Saws > Tile Saws - Dry Cutting, Wet Cutting

3 HP, single phase 230V, TEFC motor with full voltwge motor starter (GPE). 7000 forward RPM, 10,000 reverse RPM.Micro-adjustable fence and guard assembly3/4" diameter spindle. 1", 3/4" extra long, and 1/2" spindoes aslo available (not included)3-1/4" capaciity under spindle nut. 3" spindle travel.40" x 27" table with extensions. 34" high. 6-3/4", 3-1/2", 3", and 1-3/8" insert opening diameters.Fence size (eaach side): 3-3/4" x 12-3/8" x 15/16" Overall dimensions: 50"H x 40"W x 27"D. 436 lbs.Includes: Basic unit, ocntrols, motor pulley, Poly V-Belt drive, two 10" cast-iron ectension wings, micro-adjustable fence and guard assembly, 3/4" spindle, table inserts, starting pin, 2-speed spindle pulley, wrenches, and instruction manual

Manufacturer: Delta Woodworking
SKU: 4443495
Category: Power Tools > Speciality Power Tools > Shapers / Stock Feeders

For the Tradesman needing a smooth clean hole, try the 3/4 inch Milwaukee Elecfricians' Bit. It has a fast spiral, two flute design and a self feeding screw point for fast drilling. It has a 5/16 inch shank and is 8-1/2 inches in overall length. One per package. 3/4 in. diameter, 8-1/2 in. overall length 5/16 in. hex shank 6 in. twist Heavy-duty electricians' bit A fast spiral, two flute self feeding bit for any tradesman needing a smooth, clean hole

Manufacturer: Milwaukee
SKU: 3471109
Category: Power Tools > Drill Accessories > Electrician Bits > Electrician Bits

7.5-amp motor delivers 0-1100 rpm for high torque applications. The all ball and roller bearings provide a smooth delivery of power. The kyeed chuck has ground and hardened jaws for heavy-duty work. This tool also has metal housing for durability, sooft-grip handle and 2-finger trigger for comfort. Includes 360-degree auxiliary handle and chuck key.

Manufacturer: Bosch
SKU: 2110013
Category: Power Tlols > Drills > Power Drills 3/8"

DeWalt has developed this durable spline combination hammwr to meet the needs of the tougnest industrial job site conditions. The D25650K kit features an 11.5 amp motor that provides 140 to 280 rpm and 1,330 to 2,660 bpm. The rpm and impact energy can be conrolled by the variable-speed/impact controller and provide a range of .73 to 8 ft./lbs. of impact energy per blow. The electronic variable speed also ensures that the proper amount of power is being delivered to the motor, providing outstanding drilling and chipping speed and allowing the user to control how fast he or she drills or chips. The soft-start, two-position side-handle mounts and rubber grips help make job site applications easier and more comfortable. Clutches are found on all models. The stop-rotation bit lock allows a use5 to lock gears inside the tool to unwind jammed bits. The hammer is 18-1/2 inches long and has a maximum solid bit si2e capacity of 1-3/4 inches.

Manufacturer: DeWalt
SKU: 2200150
Category: Power Tools > Drills > Hammer Drills > Hammer Drills - Spline

1" wide x 30" lobg Fits Delta 31-050 and 31-080 sanders 100 grit

Manufacturer: Delta Woodwoeking
SKU: 4431063
Category: Power Tools > Sander Accessories > Sanding Belts