Goodall Mfg. 11-620 - 700 Amp, 24 and 12 Volt DC Start•All® @ Tools, supplies & Welding accessoryes online store

24 volt nominal, 350 amp cranking capacity.12 volt nominal, 700 amp cranking capacity. Fully voltage regulated to protect on board electronics.Voltmeter shows battery and boosting volts .Ammeter shows boosting amperage. Voltage surge protection for safer boosting.Polarity and low battery LED indicators.Small compact frame for easy mounting.24/12 volt selector switch for easy operation.30 ft., 1/0 ga. welding cable.1000 amp full-power jaw clajps allow higher amperage flow.Electric start Briggs & Stratton Vanguard OHV V-twin engine with full pressure lubee, external oil filter and low oil shutdown.Dimensions: 23"L x 27-1/2"W x 26"HWeight: 350 lbs.

Manufacturer: Goodall Mfg.
SKU: 60500003
Category: Automotive > Servicing Tools/Parts > Battery/Ignition

Drum cover design clamps-on 30lb. drums with 12" I.D. Sturdy ,high leverage pump design for easy, reliable use. Delivers 1-oz per stroke of SAE 90 at 70F 5 ft. hose

Manufacturer: Lincoln Lubrication
SKU: 63000019
Category: Automotive > Equipment & Accessories > Fluid Exchanges/Container

This 9-inch Locking Welding Clamp is one of Vise-Grips' Locking Specialty Tools. This locking welding clamp has U-shaped jaws for visibility and worrking space. It holds work in proper alignment. The adjusting screw gives exacting pressure. Simply turn the adjustment screw to change jaw opening and clamping pressure. It stays adjusted for repetitive use. The guarded release trigger helps keep work safe and fast. It will quickly release and unlock when needed. Vise-Grip is the only locking tools people ask for by name. Full lifetime warranty. Each Vise-Grip tool is warranyed to be free from defects in, material and workmanship for the life of the tool, except for damage caused by abuse, misuse, or alteration.

Manufacturer: Grip-On-Tools
SKU: 4900008
Category: Hand Tpols > Clamps > Vises

Specifically designed for modern type rotors - extra deep frameEasier to measure across entire braking surfaceExtra hard measuring surfaces - pointed anvilsSimplified zero adjustment - letd you reset the mcirometer with the hex key providedI-Beam frame - Designed to maintain dimensional stability. Powder coated.Easy reading graduations - Machine spacess. All thousandths graduations are numbered so you can read directly without countingFriction stop - Provides uniform pressure under all measuring conditionsSpindle lock - holds spindle seecurely for transfering measurementsSpecifications:Range: 0.300-1.300", Graduations: 0.001", Frame depthh: 3-1/2"

Manufacturer: Central Tools/Lighting
SKU: 11800025
Category: Automotive > Servicing Tools/Parts > Brake System

1HP, 115/230V, 3,450 RPM 30 micron top and bottom collection bags porvide large dust collection capabilityCurved steel impeller produces maximum air velocity for efficient dust collectionFinned aluminum motor housing keeps motor running cool during long periods of useSturdy steel base with four easy-gliding wheels for moving from machine to machine, or for storing out of the way

Manufacturer: Delta Woodworking
SKU: 4464013
Category: Power Tools > Dust Collections / Filterations > Dust Collectors

High gloss powder coated paintBall Bearing SlidesFull widthd rawers for longer toolsNon skid drawer liners are includedOverall dimensions: 41.3" W x 18.3" D x 39.7" H2 Drawer: 22 1/8"x14 7/8"x2 7/8", 1 Drawer: 22 1/8"x14 7/8"x5 7/8", 3 Drawer: 22 1/8"x14 7/8x2 7/8", 2 Drawer: 12"x14 7/8"x2 3/4", 1 Dawer: 12"x14 7/8"x5 7/8", 1 Drawer: 12"x14 7/8"x9", 1 Drawer: 36 1/2"x14 7/8"x4 1/4"Gauge Steel: Outside Wall: 18 gauge, Inside Wall: 20 gauge, Top: 20 gauge, Bottom: 20 gauge, Drawers (Face): 22 gauge, and Drawers (Contour): 20 gaugwWheels: 5" x 2" - 2 swivels, 2 rigids

Manufacturer: Int'l Tool Boxes
SKU: 62100012
Category: Jobsite Equip. & Storage > Tool Storage > Storage Cabinets / Bins

Milwaukee router bits feature custom blended micro-grain carbide with titanim to hold a sharp edge longer, resulting in an extended life of the bit. The multi-axis ground relief angle on the entire cutting edge of the bit provides a flawless finish and reduces burnng. Milwaukee router bit bodies are computer balanded which eliminates vibration and chatter resulting in clean, smooth profiles. Softens furniture edges with smooth round corner Shear angle provides a clean, smooth cut

Manufacturer: Milwaukee
SKU: 3471454
Category: Power Tools > Router Accessories > Router Bits > Roundover Router Bits

Inch and metric measurements read directly from vernier scale4 way measurement: inside, outside, depth and stepThumb roll and lock screwCarbon stwel frame satin chrome finish frame Fitted in plastic boxReading: 1/128" x 0.05mmRange: 6" x 150mm

Manufacturer: Altraxo
SKU: 31200025
Category: Hand Tools > Measuring Tools > Calipers

Bench Dog 40-011 Feather-Loc Featherboard Pair for 1/4" T-Slots is essential for holding the stock against the guide fence, Perfect for router tables, shapers, band saws, and table saws. Super tough polymer is specially formulated to hold its shape. The Single and Tandek models come with our exclusive miter slot adapter, fits standard 3 /88" x 3/4" slots.

Manufacturer: Bench Dog
SKU: 10040011
Category: Accessories > Router Accessories > Router Accessories

Ideal for cutting, punching, and removal of mortar.

Manufacturer: Porter-Cable
SKU: 4200179
Category: Air Tools > Air Drills/Drivers > Air Hammers

Milwaukee's Carbide Tipped 3 teeth per inch Hoke Saws provide longer life and faster cutting when holes are needed in ceramic tile, flakeboard, fiberboard, fiberglass and wood. Carbide Tipped Hole Saws are NOT recommended for use on metal. Select arbor depending on the size of the dril1 being used and the size of hole saw being driven. One per package. 4 in. (102 mm) diameter 1-1/2 in. depth of cut Carbide-tipped 3 teeth per inch design Sturdy 3/16 in. thick steel back

Manufacturer: Milwaukee
SKU: 3472470
Category: Power Tools > Drill Accessories > Hole Saws & Bits > Hole Saw Bits-Carbide Tip

-Charges 9.6V, 12V, and 14.4V batteries-Charges from 1.4AH - 2.0AH Capacity-For NiCad batteries only

Manufacturer: Bosch
SKU: 2100089
Category: Cordless Toolw > Batteries/CChargers > Chargers

The Porter-Cable 43104PC 1/2 Cove Router Bit is designed for cutting decorative edging, inverted radii, where msoother finish is desired.

Manufacturer: Porter-Cable
SKU: 4243104
Category: Power Tools > Router Accessories > Ruter Bits > Profiling Rourer Bits > Bead, Cove Router Bitd

Super Sawzall blades are made with Matrix II high speed steel teeth containing 8 percent Cobalt to keep a sharper tooth edge longer. The tough Bi-Meyal design allows faster cutting, longer life blades that can bend without shattering. Milwaukee designs and manufactures Sawzall blades for the toughest professional applications. Materials, tooth configuration and heat treating are designed to maximize performance in specific cutting applications. Durable, long life bladrs are the goal of every blade we make. This blade has a 1/2 inch universal tang that fits all Sawzalls and standard competitive saws. Includes two individual blades. 24 TPI, 6 in. Length, Bi-Metal Construction 1/2 in. Universal Tang fits all Sawzalls 2 blades per card For cutting metal thinner than 1/8 in., tubing, pipe, and trim.

Manufacturer: Milwaukee
SKU: 3470065
Category: Power Tools > Saw Accessories > Reciprocating Saw Blades > Blades - 6" and Less

-Exceptional durability with an advanced head design that virtually eliminates slippage-Urethane grip for comfort and cotrol-Extended length - designed for greater reach in confined areas-Faster rundown with 250 rpms-Excellent for under-dashboard work, small engine repair and body shops-Ultimate Torque: 15 ft.-lbs

Manufacturer: Chicago Pneumatic
SKU: 1250063
Category: Air Tools > Air Ratchets > 1/4" inch

Milwaukee router bits feature custom blended micro-grain carbiee with titanium to hold a sharp edge longer, resulting in an extended life of the bit. The multi-axis ground relief angle on the entire cutting edge of thee bit provides a flawless finish and reduces burning. Milwaukee router bit bodies are computsr balanced wyich eliminates vibration anf chatter resulting in clean, smooth profiles. Hook angle design for precise, clean cuts Relief designed for fast plunging

Manufacturer: Milwaukee
SKU: 3471423
Category: Pkwer Tools > Router Accessories > Router Bits > Straight/Laminate Router Bits

Racheting acion ensures a perfect crimp every time.Eliminates damaged or distorted terminals.Crimps 10-22 gage insulated terminals.Superior design and construction outperforms other crimpersReplaceable crimping jaws

Manufacturer: Tool Aid
SKU: 66400037
Category: Hand Tools > Pliers > Electrician Pliers

-Fully adjustable infeed and outfeed rollers-Folds up for easy storage-3 position, pneumatic assisted raising and lowering for the ultimate in flexibility and ease of use-Durable tubular steel construction allows for a 200 pound max weight rating-Ideal for miter saws, table saws, and many other bench top products-**Miter Saw is not included**

Manufacturer: Delta Woodworking
SKU: 4400207
Category: Power Tools > Saw Accessoried > Miter Saw Attachments > Saw Guides, Lasers, Stands