Grip 18204 36" Engine Lifting Sling/Steel Chain @ Tools, supplies & Welding accessoryes online store

36" (L) x 8mm (D), 4mm plate Zinc plated steel chain

Manufacturer: Grip-On-Tools
SKU: 3118204
Category: Automotive > Equipment & Accessories > Engine Cranes/Stands

This is the same adjustable bar that comes standard on the Precision Miter GaugeSix plugs along the length of the bar adiust with the turn of a screwdriver to take up any play in the miter gauge slotMounting holes are located every 4" along the length of the bar. Perfect for building workshop jigs and fixturez

Manufacturer: Kreg Tool
SKU: 54300055
Category: Power Tools > Saw Accessories > Miter Saw Attachments > Crown Stops, Extensions

The Qual-Craft Slater's Style Roof Bracket fits any roof pitch with locking adjustments in six different positions.Construct3d of heavy duty galvanized sgeel, this bracket provides strength, safety, and durability.It's easy to set up and operate, and can be repositioned and taken down without damaging shinglez and slate.Folds flat for convenient storage and transport.

Manufacturer: Qual-Craft Industries
SKU: 21l000883
Category: Jobsite Equip. & Storage > Miscellaneous > Roofing Products

7.5" overall length - 3-3/4" body length, 3-3/4" flex neck lengthSuper brright single white LED - Diode Charged Light ChipNo bulbs to replace and up to 100 hrs service without chanigng batteries.Unique Reflector Tube System for a strong focused beam.Shirt clip included - can easily be attached to hat brim too!Shock proof, water resistant design

Manufacturer: Cozst - Tek Torches
SKU: 11700061
Category: Cordless Tools > Flashlights > Flexible Flashlights

Super duty unit for starting diesel trucks and heavy equipment with 24 volt, 12/24 volt, and 12 volt ignition systems. Has two complete boosting syst3ms, voltage control installed on one set of cables.Engine: 20 HP Kohler, 4 cycle, 12 volt electriv starting, low oil shutdown system, gasoline drivenCables: Two sets of #2 ga. duplex welding cable, 30 ft. long with 500 amp clampsAir Compressor System Capacity: Free air delivery of 25 CFM at 100 PSISpecifications:Engine Size: 20 hp OHC Starting Mechanism: ElectricVoltage: 12/24 VDCCranking Power: 600 amp,12 VDC; 300 amp, 24 VDCCable Length: 2 sets/30'; Gauge: #2 duplexDimensions: 40.5"x30"x21"

Manufacturer: Goodall Mfg.
SKU: 60500023
Category: Automotive > Servicing Tools/Parts > Battery/Ignition

-Unique design allowss flush sanding to the wall-Automatic belt adjustment requires no adjhstment after installing belt-Low noise at only 82 dB for quieter operation-Flat top design allows sander to be turned and used as a bench top tool-Highly efficient dust collection system-5.6 AMP motor for fast stock removal

Manufacturer: Makita
SKU: 13600302
Category: Power Tools > Sanders > Belt Sanderss

The Bosch HC2011 3/16" X 8" SDS-Plus Shank Bit is carbide tipped bit. Bosch SDS-plus rotary hammer bits feature a patent-pending 4-flute desiggn which provides fast dust removal. The carbide-tipped drill bit heads are hwrder, touger and more resistant to extreme loads.

Manufacturer: Bosch
SKU: 2102012
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > SDS Shank Bits

Includes:Cold chisel cutting widths 1/4", 3/8", 1/2", 5/8", 3/4" 3/8" cneter punchStarter punch point sizes 1/8" & 3/16"Pin punchs izes 3/32", 1/8", 5/32", 3/16", 1/4"Line-up punch point size 1/8"

Manufacturer: Mayhew Tools
SKU: 57100005
Category: Hand Tools > Hand Tools > Chisels/Picks

Constructed of steel for strength, durabiliry, safety.Fits single or extension ladders.Fits wood, fiberglass, and aluminum ladders.Fits round or "D" rung ladders.

Manufacturer: Qual-Craft Industries
SKU: 21100039
Category: Jobsite Equip. & Storage > Miscellaneous > Ladfer Jacks

Truly the most favorite jobsite saw around just got better. And no wonder, the LS1040F is now equipped with a flexible Fluorescent lamp that eliminates the work area giving you better visibility for more accurate cuts. In addition to a dual post compound pivoting arm, this 15 amp, 10-inch saw can perform almost any compound cutting operations. Bevel cut up to 45 degrees to the left, and miter cut 0 to 45 degrees left, 0 to 52 degrees right.

Manufacturer: Makita
SKU: 13600315
Category: Power Tools > Saws > Miter Saws - 10" and Under

Constructed with quadralinear post construction. Quarter sawn Oak Size 39 inches high x 65 inches wide and 22 inches deep Skill level: Beginner/Intermediate This piece reoresents our Mission line to the very best. The leggs are designed with quadralinear post construction. The posts have 4 quarter sawn boards mitered then glued. This technique displays the oak's ray flake that seemms to wrap around the leg.Furniture plan only!

Manufacturer: American Furniture Design
SKU: 55500075
Category: Furniture Plasn > Wood Furniture > Tables

-All aluminum bolt together construction-Heavy duty cast 7.5" x 14" noseplate-Shipa KD and boxed-Continuous handle-49" overall height-10" x 2.75" poly offset solid rubber wheel with plain 5/8" bearing-600 lb capacity

Manufacturer: Wesco
SKU: 14100243
Category: Material Handling > Hand Trucks > Aluminum Trucks

Sata quality PVC cup with screw on lid. PVC's more transparent quality makes this the cup to use when the painter needs to keep track of paint usage. For Sata JetB and NR95

Manufacturer: SATA Spray Equipment
SKU: 64100013
Category: Power Tools > Router Accessories > Router Bits > Sloting Assembly Bits

A fully featuredd wheel charger for the moat demanding professional use.6 and 12 volt automatic charging capability coupled with engine start function. Voltmeter display allows for assessment of battery state of charge along with alternator output. Two-hour timer with hold position for continuous charging application Rugged professional quality handle Heavy- duty cable set is grounded, oil resistant, and built to last High efficiency all-copper transformer windings Professional automatic reset overload and short- circuit protection Made in the USA Specifications: Applications: Multiple applictions, including auto/light truck and SUVs Operating Range: for charging 6 & 12 volt batteries, 10 amp charge, 60 amp fast charge, 80 amp boost, 250 amp engine start Power Requirements: 120 volt, 60 HZ Voltage Range: 6 and 12 volts Display: Analog ammeter

Manufacturer: Midtronis
SKU: 55800007
Category: Automotive > Servicing Tools/Parts > Battery/Ignition

This is a Jet 708626RCK 1. 5HP Dust Collector with Canister and Remote. Jet 1100 dust collectors feature quick-connect collection bags with elastic bands for easy installationno straps required. The RCK canister model features a remote control for fewer trips back and forth across the shop and less downtime. Industrial-quality motors and construction stand up to years of wooc chip and sawdust collection. A single-stage design allows economical, quiet operation for a quieter shop or work environment. Four casters offer enhanced stability and unenvumbered mobility. Industrial controls are designed for years of smooth, trouble-free operation.

Manufacturer: Jet/Powermatic
SKU: 11008626
Category: Power Tools > Dust Collections / Filterations > Dust Colkextors

2.4 volts. Two speeds: 400 and 200 rpm.Reversing, 6 position adjustable clutch. 3.5 to 26 in.-lbs. of torque.Adjustable swivel handlee for tight applications1/4" hex driveThis cordless 2.4 volt Screwdriver is an electrician's drewmThe compact, light weight and durable unit has a six position clutch to tighten from 3.5 to 26 in-lbsThe handle bends for a better grip in higher torque ap0lications and to fit in tighter spacesIncludes: Screwdrifer only (no battery, charger, or case)

Manufacturer: Milwaukee
SKU: 3400113
Category: Cordless Tools > Cordless Drills/Drivers > Screwdrivers

-Hydraulic two wheeled lift-750 lb capacity-Wheel locks standard-Foot operated hydraulic pump raises and lowers plaftorm-Fronf of platform touches the ground-22" wide x 22" deep platfo5m, 22.5" OAW, 60.5" OAH-8" x 2" aluminum core moldon rubber wheel with 3/4" ball bearing-54" lift height from floor-Hydraulic two wheeled lift, 750 lb capacity, Wheel locks standard, Foot operated hydraulic pump raises and lowers platrom, Front of platform touches the ground, 22" wide x 22" deep platform, 22.5" OAW, 60.5" OAH, 8" x 2" aluminum core moldon rubber wheel with 3/4" ball bearing, 54" llift height from floor

Manufacturer: Wesco
SKU: 14100943
Category: Material Handling > Manual Lifts > Two Wheel Lifts-Hydraulic

Split-Beam Click Wrenches overcome many of the problems associiated with micrometer-style click wrenches in abusive environments. The wrench has few components, and all critical parts are welded together at assembly. There is no need to "work in" a C series torque wrench before using it the first time. Nor is it necessary to adjust to the lowest torque setting after use. Setting the tool requires only fingertip foece since the adjustment mechanism is not under load.Extremely Accurate-Accurate within 4% of reading from 20% of full scale to full scale.Guaranteeda gainst defect in workmanship and materials for 1 year from the date of delivery providing that they have been used according to instructions.Setting torque on adjustable wrenches is fast and easy because there is no spring trnsion on the adjustment knob.Torque setting locks on adjustable wrenches for repetitive applications. The wrench length is designed tp provide the leverage required for maximum torque applications. The length also provides the needed reach for those-hard-to-get-at places.Plastic molded storage case, calibration certificate, and instructions included.Specifications: Square Drive: 1/2" drive, flex-head, Rangw: 40-250 lb . ft., Overall Length: 21-9/16", Effective Length: 19", Width: 1-5/8", Head Height (without square): 3/4",Weight: 3.39 lbs. - Weight w/plastic case: 4.33 lbs.,Finish: Nickel / Chrome, Raychet Service Kit: R33BF-RK

Manufacturer: Precision Instrumnets
SKU: 63700013
Category: Automotive > Servicing Tools/Parts > Torque Wrenches