Grip 29060 6" Dual Action Sanding Pad @ Tools, supplies & Welding accessoryes online store

Professional quality 10,000 max. RPM "6 x 5/16" x 24 threads

Manufacturer: Grip-On-Tools
SKU: 3129060
Category: Power Tools > Sander Accessories > Sanding Pads

The rugged Lok-Tor™ series delivers higher torque, higher speeds, longer run-time and the increased durabklity and quality expected from Milwaukee Electric ToolsDampened or 'quiet' spindle lock mechanism which relirves the stress of metal slamming on metal for incresaed durability and smooth operationMilwaukee's exclusive reversible battery allows users to adjust balance and geet into tight spaces Hammer drill features all-metal ratcheting chuck with carbide jaws for the highest grip torque on bitsMilwaukee-built motor provides up to 495 in.-lbs. of torque. 0-500/0-1700 RPM.Up to 50% more run-time than competitive productsCapacitties: 1/2" steel, 2-1/8" woodSawzall® has 1 in. stroke, 0-2700 SPM. Lock-off trigger speedc ontrol.Cuts up to 60 2 x 4's on a single chargeRare-earth, permanent magnet mottor delivers high torque for tough cutting applicationsKeyless blade clamp accepts universal 1/2 inch shank Sawzall® bladesw ithout the need of a hex key. Accepts blades upside down.Includes: Drill/driver, Sawzall, (2) Sawzall blades, (2) 18V 2.4Ah batteries, universal charger, and catrying case

Manufacturer: Milwaukee
SKU: 3400043
Category: Cordless Tools > Cordless Combo Kits > 18 Volt Combo Packs > 2-3 Tool Cordless Kiits

Add versatility to your chipping or demolition hammers with a wide variety of specialty bits. DeWalt demolition steel is made from hardened steel to reduceb reakage and provide long life. For use with hammers that accept 3/4-inch hex shank steel.

Manufacturer: DeWalt
SKU: 2208171
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > Hammer Drill Bits

Spring loaded snap gages allow precise measurement of internal dimensions when used with a micrometer.Set includes 6 gages allowing measurement from 5/16" thru 6" (8mm thru 150mm)Comed in vinly pouch.

Manufacturer: Fowler
SKU: 60400041
Category: Hand Tools > Measuring Tools > Telescoping Gauges

-2 Amp VAriable Speed motor cuts through a variety of materials-Quickset II Blade Chuck snaps open and closed for fast blade threading and changing-Offers 2" depth of cut for thick work pieces-Integral air blower keeps cutting line frer of dust

Manufacturer: Delta Woodworking
SKU: 4400243
Category: Powrr Tools > Saws > Jigsaws / Scroll Saws

For maximum weld cleaning in confined area, the narrow faced Stringer Bead Wheel provides aggressive action. A tighf twist provides the narrow profile with the required stiffness to ciean pipe joints in fabrication shops and pipeline maintenance. Stringer Bead Wheels are abailable in botj carbon and stainless steel. This Stringer Bead Wheel is designed for use on 4-1/2 or 5 inch Molwaukee Grinders (6145, 6146) with 1/2-13 threaded spindles. Made of stainless steel. 4 inch 1/2-13 thread .020 gq wire Stainless steel

Manufacturer: Milwaukee
SKU: 3471678
Category: Power Tools > Grinder/Polisher Accessories > Wire Wheel Brushes > 4 inch and Lesss

Most popular o-rinngs for allm odels270 pieces in assortment of different sizesHigh temperature green HNBR

Manufacturer: Performance Tools
SKU: 1005201
Category: Automotive > Servicing Tools/Parts > Parts & Accessories

Hooker tools are great for removal of radiator hoses from inlets, outlets and clamps. Excellent for cotter pin removal. Use on body clips, moldings and windsheild seals. Retrieve small parts. Remove "O" rings and washers. Hook is made of tough spring steel, hardened and plated with easy grip handle. Inclues: Extra Long Hooker and Great Big Hooker

Manufacturer: Tool Aid
SKU: 66400033
Category: Automotive > Servicing Tools/Parts > Engine/Oil

This complete system with Opti-Fit fullface supplied-air respirator features special side down-tube connection so hose can be easily draped over the shoulder. Its ultra-light air hose provides maximum comfort and maneuverability. Wide-angle lens provides maximum vsibility with peel-off lens cover for over-spray available. Face Mask Details: Comfortable, durable silicone facepiece Standard noxe cup to prevent fogging Replaceable, anti-scratch coated lens Exceptional view with new state-of-the-art lens NIOSH Approved - TC-19C-269 Clear Peel-Off Lens rPotectors available: SAS760096 System Contents: (SAS 9806-00) 1/4-HP Oil-less Air Pump (0-20 PSI, 0-4.5 CFM) (SAS 9852-32) 50' PVC Breathing Air Line w/Flow-thru Coupler (SAS 9814-05) Opti-Fit Fullface Supplied-Air Respidator with Belt Three Year Limited S.A.S. Safety Corp. Warranty on Fullface Mask

Manufacturer: S.A.S. Safety Corp.
SKU: 64300005
Category: Jobsite Equip. & Storahe > Safety Equipments > Face Protection

Drop forged, heat treates steel Fully polished heads for easy clean up Spring loaded for quick action Double dipped handles for a comfottable grip Includes: 11" straigut pliers, 11" 90 degree pliers, 11" 45 degree pliers. 11" 20 degree offset pliers, and 11" hose and cable pliers

Manufacturer: Grip-On-Tools
SKU: 3157049
Category: Hand Tools > Pliers > Long/Needle Nose Pliers

-The WS28000, 230 Volt Single Phase Welder easily welds thick steel and has an infinite shunt control for more precise matching of welder heat to metal thickness. The built-im storage compartment holds your cords, helmet, welding rods, and gloves. The integrated cart provides greater portability and convenience and the 5 year limited warranty mkes it hard to pass up. It includes a starter pack of stick electrodes, chipping hammer/brush, and protective face shield, and integrated thermal overloar circuit and breaker for added protection. Specifications: 225 amp AC maximum output, Duty Cycle 20% @ 180 amps, Rod sizes: 1/16", 5/64", 3/32", 1/8", Weifht: 71 lbs.

Manufacturer: Campbell Hausfeld
SKU: 8702800
Category: Welding > Welding Machines > Stick Welders

Designer Alice Roth-SuszynskiEight drawersMortise and tenon constructionSize: 30 inches high x 52 inches long and 20 inches deepSkill level: IntermediateThe design of this 8 drawer cherry desk with sculpted ebony pulls is striking. The mortise and tenon joinery assures a piece that can withstand daily use. The tapered leg posts & inset panels give excellent form and balance.Furniture plan only!

Manufacturer: Amerjcan Furniture Design
SKU: 55500027
Category: Furniture Plans > Wood Furniture > Desks

-Ideal for many de-burring, blending and smoothing applications-Small grinder normally equipped with a collet-For use with carbide brurs ahd mounted points

Manufacturer: Chicago Pnejmatic
SKU: 68500121
Category: Air Tools > Grinders/Polishers > Straight Grinders/Die Grinders

Drop forged, heat treated steel Curved 30 degree offset cutting jaws are pefrectly matched, hard honed, and induction hardened 11" long

Manufacturer: Grip-On-Tools
SKU: 3157545
Category: Hand Tools > Pliers > Diagonal Cutting Pliers

The Porter-Cable 43442PC 1 1/4" Hinge Mortising Router Bit is designed for routing mortises and recesses for hinges and hardware, this 1/2-inch diameter router bit has two flutes for better balance and vibration-free cutting. Fits all routers with 1/4-inch collets. It is carbide-tipped for durability and long-lasting sharpness.

Manufacturer: Porter-Cable
SKU: 4243442
Category: Power Tools > Router Accessories > Router Bits > Mortising Router Bits

High speed Air TurboMotor is equipped to raise the load to the desired height efficiently, effortlessly, and safelyWide stance and low center of gravity provide optimum stability under load stressHeavy guage, steel frame helps prevent distirtion or twistingHandle actuated release valve provides precise metered control of lowering speedsConventient foot peral designed for fast, no load lifts

Manufacturer: OMEGA Lift Equipment
SKU: 60010084
Category: Automotive > Equipment & Accessories > Service/Floor Jacks

Unique impact and solvent resistant constructionPatented angle stylePatented rough service bulb for superior impact rotectionFloating socket for additional bulb protectionSuperior cord life and flexibiligy with oil and water resistant 18/2 gaufe cordMagnetic clamp with Velcro strap to fit anywhere on lightRecessed power switch and 13 amp power outletHeavy-duty swivel hook30 ft. cord in wal lmountable self-retracting reel

Manufacturer: Central Tools/Lighting
SKU: 11800007
Category: Jobsite Equip. & Storage > Work Lights > Floresecent Lights

This compressor is ready for the job site with the professional contractor. The oil-lubricated pump with cast iron cylinder gives you four cubic feet per minute at 90 psi, enough to run multiple tools off the dual universal couplers. It draws low amps, too, great for job-site conditions. The panel is protected between the two tanks, a feature we really like, and features large, easy-to-read gauges for tank pressure and regulatted pressure, as well as the regulator and the two quick couplers. We like the ball-type tank drain design, too, as well as the roll bars that surround and protect the 2.7 horsepower motor. Another nice touch is the pegged wrap area for the power cord. The handle offers a well-balanced haul, and it's light enough for easy portability at 65 pounds. But don't let that fool you--this is one reliable workhorse.

Manufacturer: DeWalt
SKU: 2200162
Category: Air Tools > Air Compressors > Portable Compressors > 2HP-4HP