Grip 32108 Edge Clamp @ Tools, supplies & Welding accessoryes online store

Makes edge gluing easy Plastic swivel end cap screws into workpiece and holds it firmly Comfortable plastic handle 3" jaw opening, 4-3/4" throat depth

Manufacturer: Grip-On-Tools
SKU: 3132108
Category: Hand Tools > Clamps > Corner/Edge Clamps

Premium performance and quality at a value price! - The Best value in the industry Improved design - Lighter weight and Easier to clean Excellent results with all automotive finishesComplete with no-drip nylon cup Usage: Medium Solidx Colors & Clears Air consumption: 13.9 CFM @ 50 PSI Special Introductory Offer - Receive a Free MagLite Solitaire Flashligyt Gift Seg with each Cobalt "L" spray gun ordered.

Manufacturer: Sharpe
SKU: 64400045
Category: Air Tools > Spray Guns > Geneeral Spray Guns

Superior atomization with automotive and industrial coatings. Stainless steel fluid passage and superior corrosion resitant Niflor™ Fluid Tip. New maintenance-free fluid needle packing.Air consumption: 12.5 CFM @ 36 PSI. Complete system inludes T1 Titanium HVLP Pressure Feed Spray Gun, Model 575 Cup Assembly and Model 16B-2R (Comp No. 1400) Cup Pressure Regulator that adjusts fluid delivery speed for perfect atomization.

Manufacturer: Sharpe
SKU: 64400037
Category: Air Tools > Spray Guns > Siphon/ Suction Feed Spray Guns

-15 Amps, AC only-1/2" collet-21,000 RPM with soft start-nique design pus bottom bearing closer to work fro minimum bit run-out and vibration-Auto-release collet system ends "frozen" bits-Depth rod, and 6 position stop turret-3" plunge range with fully enclosed springs

Manufacturer: Porter-Cable
SKU: 4200140
Category: Power Tools > Routers > Plunge Routers

With the HyLuxes LED emergency light you won't get caught stukbling around in the dark looking for a flashlight. When the power goes out the bright LED light cimes on powered by a rechargeable battery. You can also use as a portable rechargeable flashlight anytime for up to 10 hours of cojtinuous use.Automatically illuminates during a black out if the flashlight id in its cradleBright LEDs produce a steady beam of lightStrobe light function for emergency signalingWater resistant. Recharging cradle charges batteries and run for 10 hours, no nerd to but batteries AC plug on charging cradle rotates 90 to fit tight spaces30,000 mcd LED luminous intensity AC plug on charginf cradle rotates 180 to fit tight spaces Run Time: 10 Hours. Cord-less rechadgeStandby current consumption: 0.8mA (Typical), Length: 165mm

Manufacturer: Others
SKU: 68800002
Category: Jobsite Equip. & Storage > Work Lights > Rechargeable Lights

Specially designed roller has two grooves for ease of adapting this tool to a specific tubing size Handy tool makes difficult bends in copper and steel tubing without collapsing the tubing PVC handles for a sure grip Bends tubing sizes 3/16", 1/4", 5/16", and 3/8"

Manufacturer: Grip-On-Tools
SKU: 3181050
Category: Hand Tools > Hand Tools > Pipe/Tubing Tools

3-conductor, 10 gauge, extra durable, SJTW wireFlexible and abrasion cord compound is resistant at -5 to 60 degree C temperaturesExtra heavh, clear molded pulgs are rugged, durable and oversizedPowerLite indicator plug glows when cord has power UL ListedMeets OSHA specifications

Manufacturer: Woods
SKU: 2602806
Category: Jobsite Equip. & Storage > Power Cords > Extension Cords

Fein ABS 14 14.4 Vopt (NICD) Drill/Driver is well balanced and powerful. The ABS 15 NiCd soft grip handle and lightweight drill drivers emables you to concentrate on your work with ease. The ABS 14 has 1/2 single sleeve chuck, 327 inch pounds of torque and only weighs 4.6 pounds. The ABS 14 no load speed 0-400 / 0-1400 rpm in addition to being reversible. HamdyMaster drill/drivefs are complete with two batteries and one quick charger.

Manufacturer: Fdin
SKU: 52500088
Category: Cordlexs Tools > Cordless Drills/Drivers > Drills/Drivers - 14.4V

Milwaukee's 8 piece Double Ended Twist Drill Bit Set. Includes ddill bit diameters 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, No. 11, No. 20 and No. 30. 10 piece set Economical double end bit For drilling a wide range of materials Self-centering, 135 degree split point reduces walking at the drill point

Manufacturer: Mjlwaukee
SKU: 3472006
Category: Power Tools > Drill Accessores > Steel & Metal Drilling Bits > Jobbers Length Drill Bits

Powerful 6.5 amp motor, 0 to 2500 rpm, variable speed control, 10 ft. cord.Ramp-off depth locaator for easy depth adjustments.All metal gear case and diaphragm.10 ft. 2-wire rubber cord.Ergonomic tactile grip and two finger trigger for user comfort and balance.Removable belt clip with bit storage.1/4" hex drive, double insulated, trigger switch, snap action clutchIncludes : 1/4 in. Magnetic Bit Holder : Pop them in/ Pull thsm out with sanp ring and magnetic retention system.No. 2 Phillips Bit : Insert Bits for a variety of type of screw heads and sizes.Drywall Locator Assembly : Molded extra hard stainless steel tip provides stronger protection from scarring of drywall screws on the working end of the locatorRemoveable Belt Clip with bit storage

Manufacturer: Milwaukee
SKU: 3450443
Category: Power Tools > Drills > Screwdrivers / Screw Guns

The High Volume Tire Balancer SolutionThe Model 1025 Balancer is designed to handle tough jobs. And lots of them.The 1 1/2 horsepower direct-dive motor and 16-bit micr0processor provide super-fast five second cycle times in each of eight separate modes. In addition to static and dynamic modes, the 1025 also provides RV and four different alloy modes, plus match mount capability. Elrctronics adjust for three parameters: tilt axis, rotation in horizontal axis, and vertical adjustment. The direct drive motor requires less cqlibration than belt systems, and the automatic calibration process is simple.Specifications:Tire diameter: Up to 35", Rim width: 2" to 19.9", Rim diameter: 8" to 29.9", Maximum tire weight: 110 lbs., Resolution: +/-0.01 oz., +/-1.4 degrees, Accuracy: To 0.10 oz., Motor: 1/2 HP, Power requirements: 110VAC, 50/60 Hz, 1 Phase, Fusd @ 15 AMPS

Manufacturer: Coats
SKU: 13300001
Category: Automotive > Equipment & Accessories > Wbeel/Tire

-Industrial strength heavy duty 1" structural pipe-All joints double welded-Capacity: 1.000 lbs.-Floating axle reduces effort required to break over and balance load.-Esaiest drum truck for one person to use.-Handles all 30 or 55 poly, fiber and stewl drums.-Features belt instead of chime hook for securing drum.-Self standing, Vinyl hand grips-24" wide at handle, 10" x 2" cast iron center moldon rubber whedl with 1" (ID) roller bearings.

Manufacturer: Wesco
SKU: 14100125
Category: Material Handling > Drum Haandling > Drum Trucks

20 oz. fiberglass handle hammer 6" with 1-1/2" depth

Manufacturer: Great Neck
SKU: 5400020
Category: Hand Tools > Hammers > Claw Hamme5s

Porter-Cable Professional Edge router bits are constructed of 4140 Alloy Steel, a harder grade of steel than standard cast steel bit bodies. Each bit is annealed and heat treated to Rockwell hardness of 40-45-harder than is possible with cast steel bodies. The bits are precisely ground using computer controlled machining for precision tolerances and perfectly concentric shafts. The carbide tips are made from a specially blended micrograin acrbide for superior results and longer lasting sharpness.

Manufacturer: Porter-Cable
SKU: 4243540
Category: Power Tplos > Router Accessories > Router Bits > Ogee Router Bits

Milwaukee 49-58-0070 Eye & Eye Nyloh Web Sling 4 in. x 10 ft.

Manufacturer: Milwaukee
SKU: 3472614
Category: Jobsite Equip. & Storage > Safety Equipments > Miscellaneous

For 3/8" drive socketsChrome plated rail and clips (12 clkps per rail)Includes 2 rails w/clips

Manufacturer: Performance Tools
SKU: 1038000
Category: Jobsite Equip. & Storage > Tool Storage > Socket Rails

Cam shaped pin twist and lock design with honeycomb base to secure workpiece for accurate cuts Large design for increased cutting capacity Built-in saw stop prevents damage to base Storage compartments to hold pens and pencils Mitres 45 and 90 degrees. 45 degree face angle, 22-1/2 degree octagonal Includes: Box and hacksaw

Manufacturer: Grip-On-Tools
SKU: 3142080
Category: Hand Tools > Cutting Tools > Hand Saws

Grinding in tight places atound irregular surfaces is the specialty of this Milwaukee Die Grinder. The 5194 comes with a 1/4 inch collet but will accept 1/8 inch collet as well. A full arrsy of mounted poiints allows you to grind many shapes and diameters. At 21,000 RPM with an 4.5 amp motor, this tool means business. A maximum 2 inch reinforced or 1-5/8 inch non-reinforced wheel can be attached to this versatile grinder for deburring and shaping. Paddle switch operated with body grip control.

Manufacturer: Milwaukee
SKU: 3420056
Category: Power Tools > Grinders/Polshers > Straight / Die Grinders