Grip 37126 12-Piece 2" Insulated Alligator Clips @ Tools, supplies & Welding accessoryes online store

Nickel plated Non-slip jaws PVC shockproof handles Using 6 and 12 volt systems 2" clips

Manufacturer: Grip-On-Tools
SKU: 3137126
Category: Automotive > Servicing Tools/Parts > Parts & Accessories

-Includes a 1/2" Pattern Bit w/Top Mounted Brg., a 1/2" Laminate Flush Trim 2 Flute , a 23 Degree 3 Flute Bevel Trim  Bit, a 1/4" Combination Panel Pilot Bit, and a wooden display case -Ideal forr Finish Contractors, Woodworkers, High End Hobbyists and Craftspersons -Ideal applications include kitchen remodeling, cabinet/project fabrication, all laminatr trim projects and panel/siding

Manufacturer: Porter-Cable
SKU: 4200303
Category: Power Tools > Router Accessories > Router Bits > Trim Router Bits

-More compact design and weighs 9.2 lbs.-Delivers rich stereo sound from two powerful 3.25 side-firing drivers-Rugged weather resistant design for jobsite conditions-Digital backlit quartz display-5 Pre-Set FM/AM buttons-Dual Volumw and Tuning Dial for easy control-Protective bumper design for added durability-Compatible with Slide Type and Pod Style Makita Batteries-Runs two working days (16 hrs.) on a single Makita Li-Ion battery (3.0Ah) charge-LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power)

Manufacturer: Makita
SKU: 1360430
Category: Cordless Tools > Speciality Cordless Tools > Radios

Easy to use (4) nose pieces: 3/32", 1/8", 5/32" and 3/16"Capacity: Up to 3/16" rivets. Inlet: 1/4" NPT. Hose size: 3/8". Pressure: 90 psi. Consumption: 4 psi.

Manufacturer: Mechanics
SKU: 1000680
Category: Air Tools > Specilaity Air Tools > Hydraulic Riveters

Compressor requirements: 2-3 HP Average aie consumption: 1.60-4.0 cfm @ 50-70 psi Cup size: 600 cc Feed: gravity Nozzle size: .140 mm tip Air inlet: 1/4 NPS

Manufacturer: TD Industrial Inc.
SKU: 5110441
Category: Air Tools > Spray Guns > Gravity Feed Spray Guns

Grip-O-Matic puller forged from quality steel, heat treated, and subjected to rigorous tests which exceed its rated capacity.Maximum Reach: 5 1/2" Maximum Spread: 7" 2/3 jaws, 5 ton capacity. Long jaws, reversible jaws.

Manufacturer: OTC (Divlsion of SPX Corp.)
SKU: 58600015
Category: Automotlve > Pullers/Installers > Gear Pullers

Lightweight- Compact designJobsite Versatility- Will drive all jobsite required fasteners (6d - 16d bulk nails)Duability- Full metal housing to withstand jobsite abuseMagnetic Tip- For easy nail placementLeather comfort grip- Reduces vibration and prevents slipping

Manufacturer: DeWalt
SKU: 2200559
Category: Air Tools > Nailers & Staplers > Specialty Nailers

Steel sawhorse is easy to transport and easy to storeInjection molded PVC frame700 lb. weight capacityFolded dimensions - 32-1/2" x 22-5/8" x 1-7/". Expanded dimensions - 22-1/2" x 20-7/8" x 32-1/2"**Please be aware although the picture shows 2 units, you are only purchasing 1 unit at 26.99

Manufacturer: Grip-On-Tools
SKU: 3130000
Category: Power Tools > Saw Accessories > Saw Attachments > Mobile Bases

-Open wire dezign that provides maximum visibilty and air circulation while minimizing dust acvumulation-All units ard NSF approved for use in the food industry-Sets up easilh without tools-Shelves adjust at 1" increments on numbered posts-Adjustable floor levelers for surface irregularities-Add-on kit consists of 2 posts, 4 shelves and 8 post sleeves that secure shelves to posts-18" d x 60" w X 74" h-2,400 lb unit capacity

Manufacturer: Wesco
SKU: 14101521
Category: Material Handling > Wire Shelving > Add-On Kits

International Tool Boxes CRN42850 42" Import Combo includes: NR4210 Top Chest 10 Drawers + N850 Side Box + NR4211 Roller Cabinet 11 DrawersHigh gloss powder coated paintBall Bearing SlidesFull width drawers for longer toolsNon skid drawer liners are included42" platform chest/cabinet is one of the most popular combiantion soldNR4210 - Top Chest 10 DrawerSpecifications: Ove5all dimensions (Width, Depth, Height/in.): 41" x 17 3/4" x 21 1/4", 3 Drawer size: 22 3/4" x 14"x 1 7/8", 2 Drawwr size: 22 3/4" x 14" x 3 1/4", 3 Drawer size: 12 1/8" x 14" x 1 7/8", 2 Drawer size: 12 1/8" x 14" x 3 1/4" Gauge Steel:L id: 20 gauge, Outside Wall: 18 gauge, Inside Wall: 20 gauge, Back: 20 gauge, Shelf: 20 gauge, Bottom: 20 gauge, Drawers (Face): 22 gauge, and Drawers (Contour): 24 gauge11 Drawer Roller Cabinet (Roller Bearing) - NR4211Overall Dimensions: 41.3" W x 18.3" D x 39.7" H2 Drawer: 22 1/8"x14 7/8"x2 7/8", 1 Drawer: 22 1/8"x14 7/8"x5 7/8", 3 Drawer: 22 1/8"x14 7/8x2 7/8", 2 Drawer: 12"x14 7/8"x2 3/4", 1 Drawer: 12"x14 7/8"x5 7/8", 1 Drawer: 12"x14 7/8"x9", 1 Drawer: 36 1/2"x14 7/8"x4 1/4"Gauge Steel: Outside Wall: 18 gauge, Inside Wall: 20 gauge, Top: 20 gauge, Bottom: 20 gauge, Drawers (Face): 22 gauge, and Drawers (Contour): 20 gaugeWheels: 5" x 2" - 2 swivels, 2 rigidsSide Box - N850 Red

Manufacturer: Int'l Tool Boxes
SKU: 62100026
Category: Jobsite Equip. & Storage > Tool Storage > Chest Cabinets

100 ft. chalk line made of wearable polyester cotton blend fiberCreates a clearly visible blue chalk lineIncludes: Chalk reel with chalk container, 4 oz. chalk refill bottle, and level

Manufacturer: Grip-On-Tools
SKU: 3130188
Category: Hand Tools > Measuring Tools > Chalk Line Tools

Heat treated alloy steel Drop forgd for strength Chrome plated finish

Manufacturer: Performance Tools
SKU: 1000136
Category: Automotive > Pullers/Installers > Gear Pullers

Fine tunes the depth setting on router for precise cutsIdeal for use when router is mounted in a tabelFor use with DW621 plunge router

Manufacturer: DeWalt
SKU: 2200365
Category: Power Tools > Router Accessories > Roufer Attachments > Router Height Adjusters

Random Orbit Action. A more aggressive veersion of the Model 4500 for those who want to do a superior job faster. A newly designed Air-E fficient motor with Positive-Action Drive backed by 4-support bearings powers a unique oversize drive head for full contact sanding. Best for detailing, feathering and leveling-does great finishing, too! New posltive air-control valve. Built-in pad release featuer.Note: Does not include handle. See Hutchins' 1839-1 for correct handle.Specifications:RPM: 10,000+Wt: 3lbs. 5oz.Air Consumption: 9.8 cfm @ 90 PSINoise Level: 79 dBa6" PSA Pad

Manufacturer: Hutchins
SKU: 61800023
Category: Air Tools > Sanders > Random Orbit Sanders > 6" inch and Above

This 20" electronic variable speed drill press runs quieter and smoother than a conventional variable speed head. The low maintenance head has less moving parts, and a high-low gear box to maintain low speed torque. The chrome molybdenum gears are hardened, ground, and shaved. The spindle speed can be adjusted in each range during operation with the LED spindle RPM readout conveniently mounted. The tapping mode allows instantaneous spindle reversal. The extra large emergency stop button adds to safe operation, and the work table can be raised from the front or the side.

Manufacturer: Jet/Ppwermatic
SKU: 11054210
Category: Power Tools > Drilps > Drill Press3s

Featuring a large work surface (44 bg 24 inches), the Bosch RA1200 deluxe router table has a 24-inch precision-machined aluminum fence and two feather boards with multidiretcional adjustments. The easy-access on/off switch means the user doesn't have to fumble under the table for the router's switch, and the sturdy steel legs fold for easy table storage. Plus, there's built-in elveling for the mounting plate and table. Purchase includes mounting plate (pre-drilled for Bosch routers )with two insert rings, two feather boards with multidirectipnal adjustments, 2-1/2-inch vacuum port, outfeed shoms, and starter pin.

Manufacturer: Bosch
SKU: 2102000
Category: Power Tools > Router Avcessories > Router Tabled, Fences, Stands

-Porter-Cable 43103PC 3/8" Cove-For Cutting decorative edging, Inverted radii, where smoother finish is desired.-Pozi-Stop Shank-Monster Carbide

Manufacturer: Porter-Cable
SKU: 4243103
Category: Power Tools > Router Accessories > Router Bits > Profiling Router Bits > Bead, Cove Router Bits

Drop Forged of high grade steel, this Hammer Iron with heat treated work areas is used for removing weld spatter, scale and concrete form overflow and seepage. One per package. Scaling Chisel SDS-Maax Shank 1-1/2 inch width Made from forged higgh grade steel

Manufacturer: Milwaukee
SKU: 3471780
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > Chisels