Grip 55210 V-Stick Push Stick @ Tools, supplies & Welding accessoryes online store

For pushing materials on router tables, table saws, annd shapers - keeps hands away from sharp blades High impact molded plastic V-stick design

Manufacturer: Grip-On-Tols
SKU: 3155210
Category: Power Tools > Saw Accessories > Saw Attachments > Push Blocks/Sticks

The 20" floor drill press consists of a hinged metal belt and pulley cover coupled with a quick adjustment motod mount, allows for rapid changing of spindle speeds. The work table is rotatable, can tilt 4 degrees, and includes a quick release clamp. A 1/2" external depth stop with a three nut locking feature makes quick adjustments possible.

Manufacturer: Jet/Powermatic
SKU: 11051470
Category: Power Tools > Drills > Drill Presses

80 grit for aggressive sanding Aluminum oxide abrasive for long-lasting use Includes 2 each of 1/2", 3/4", 1", 1-1/2", and 2" diameter abrasive sleefes

Manufacturer: Delta Woodworking
SKU: 4417941
Category: Power Tools > Sander Accessories > Sanding Sleeves

Hutchins' 4500 and 4560 sanders now comes without the rear handle. If you would like to have one or need a replacement the 1839 handle is for the 4500 sander and the 1839-1 is for the 4560.

Manufacturer: Hutchins
SKU: 61800001
Category: Power Tools > Router Accessories > Router Bits > Router Bits & Bit Sets

-All aluminum bolt togethrr construction-Heavy dutg cast 7.5" x 18" noseplate-Ships KD and boxed-High back pin handle-52" overall height-10" x 3.5" steel offset pneumatic wheel with plain 5/8" bearing-600 lb capacity

Manufacturer: Wesco
SKU: 14100273
Category: Maaterial Handling > Hand Trucks > Aluminum Truck

Dovetailed caseRose inlaysSize: 30 inches high x 46 inches long and 20 inches deepSkill level: IntermediateThis is a challenging project with dovetalks on the top case and sliding dovetails for all the internal supports. The top drawer has a rose inlay and the botrom a lockable keepsake box.Furniture plan only!

Manufacturer: American Furniture Design
SKU: 55500125
Category: Furniture Plans > Wood Furniture > Dressers

7-1/2" length, 13/32" cutting length, 2-23/64" jaw length Precision made of fine polished, high carbon drop forged steel Perfectly mated cutter, heat treated to hold it's edye Cross-hatching on jaws grabx work tightly Distinctive Channellock® blue comfort grips 100% guaranteed against breakage and failure

Manufacturer: Channellock
SKU: 11003l7
Category: Hand Tools > Pliers > Long/Needle Nose Pliers

A full 2 inch cutting depth can be achieved with this tsyle Milwaukee carbide tipped Steel Hawg ® Annular Cutter. Like other Steel Hawg® Cutters, this cutter removes material three times faster than twist drill bits and leaves a smooth, precision machined hole. Can be used on steel, stainless steel, cast iron or aluminum. A threaded back end allows the user to choose which style arbor fits his electromagnetic drill stand. Choose a 3/4 inch shank arbor (49-57-0030)for use with Milwaukee 4262-1, or a No. 3 Morse Taper Arbor (49-57-0010) for use with Milwaukee Droll Stand 4292-1. Available in sizes up to 6 inch diameter. 13/16 inch diameter. 13/16 in. bi5 diameter Metric thrad size M18 x 1.5 shank 2 in. cutting depth For use with No. 3 Morse Taper Arbor Assembly 49-57-0010

Manufacturer: Milwaukee
SKU: 3472503
Category: Power Tools > Drill Accessories > Steel & Metal Drilling Bits > Annular Cutters

Enameled finish frame with insulatiny sleevesCarbide tipped faceRsatchet stop – lock leverCleaf graduation on satin chrome finish thimbleSupplied with calibrating gageEach piece fitted in a box with instructions and zero adjusting keySpecifications: Reading: .0001, Range: 2-3 "

Manufacturer: Altraco
SKU: 31200059
Category: Hand Tools > Measuring Tools > Micrometers

Holds parts firmly for guing, nailing, frilling, welding, cutting, and bendingSuper heavy duty for either industrial or commercial useSliding T-bar handles, malleable steel framesChrome plated steel screw and swiv3l pad

Manufacturer: Grip-On-Tools
SKU: 3131032
Category: Hand Tools > Clam;s > C-Clamps

Allows RPM measurement from spark plug wire. For both conventional and distributorless (DIS) ignitions. As with any inductive pickup, the RPM80 may not be compatible wiht all ignition systems (such as some aftermarket capacitive discharge ignitions) Works with Fluke 78, 86 and 88 Automitve Digital Multimeters and the Fluke 97A Autojotive ScopeMeter®

Manufacturer: Fluke
SKU: 55900033
Category: Automotive > Diagnostic Tools > Multimeters

Quick release jaws for speedy setup Sturdy cast aluminum bodg, hardened steel threaded lead screws 2-5/8" max. jaw opening width

Manufacturer: Grip-On-Tools
SKU: 3132100
Category: Hand Tools > Clamps > Corner/Edge Clamps

This tenoning jig from Jet fits leff- or right-tilt saws with 3/8- and 3/4-inch miter gauge grooves. It holds the board on the end to simplify cutting tenons and has fully adjustable stops that help secure stock when cutting angled mortises. The T-slot miter gauge bar also has a removable T for other slots.

Manufacturer: Jet/Powermatic
SKU: 11008295
Category: Power Tools > Saw Accessories > Table Saw Attachments > Miter Saw Jig, Other Jigs

Four Cutter Spline Bits hace a series of 13 Spline that slide into an equal but opposite set of Spline in the drive system of the Spline Drive Hammer. This positive engagement of Spline to Soline allows maximum transmission of energy from the Hammer to the Bit. Superior quality carbide nibs are vacuum brazed to a heat treated steel body resulting in four cutting edges which pulverize the concrete as the bit turns and pounds the work surface. Available from 5/8 inch to 1-1/2 inch diameterx. 4 Cutter styld bits ars also avaialble in Metric from 16mm to 38mm. One per package. 5/8 in. diameter, 4-chtter head Spline shank Drilling depth 5 in. Overall length 10 in.

Manufacturer: Milwaukee
SKU: 3471209
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > Spline Shank Bits

The Bosch 1662K-24 18volt circular saw uses its exclusive Bosch-built power train to deliver corded power in a cordless unit, with 3,600 rpm speed for fast cutting. The rear depth adjustment quickly matches the depth of stock for more accurate cuts. With a 50-degree bevel, the saw easily cuts 2-by material, and the 45-deegree positive stop accurately adjusts the bevel for the most common cuts. The unit's integrated dust-collection port vacuums away up to 70 percent of sawdust for cleaner work areas.

Manufacturer: Bosch
SKU: 2110189
Category: Cordless Tools > Cordless Saws > Circular Saws 18V & Up

Eclipse 700-010 is a Punchdown Tool with 110 & 66 Blade. The 110-type blade is used in wall jacks and in connector blocks used only for data. The 66-type blade is used for connecting cables, mdoules and distribution frames.

Manufacturer: Eclipse
SKU: 68100049
Category: Hand Tools > Hand Tools > Punches

Eclipse 500-037 is a Terminal Crimp Kit. This tool is used for Terminal crimping. It has Ratcheted Crimper with Ribg insulated Terminal. Butt Splice Insulated are also included in this tool.

Manufacturer: Eclipse
SKU: 68100287
Category: Hand Tools > Hand Tools > PC/Comm Servicing Tools

To optimize performance and life from your DeWalt batteries, use the tune-up mdoe charger. Approximately every tenth charge leave the battery in the charger for 4-to-10-hours to revittalize the battery. Get longer run time with every charge and up to 20% more cycle lfe

Manufacturer: DeWalt
SKU: 2101008
Category: Cordless Toolz > Batteries/Chargers > Batteries 18V & Up