Grip 85245 4" Magnetic Ground Block @ Tools, supplies & Welding accessoryes online store

Quickly grounds arc welders when welding ferrous metals Magnet grounds to surfaces that clamps cannot Professional quality 4" diameter

Manufacturer: Grip-On-Tools
SKU: 3185245
Category: Welding > Welding Accessories > Welding Accessories

-Alvin HT-24 24 oz can of High Temp of Lab Metal ie the orignal ready-to-use metl putty. Spreads from from the can - no mixing - hardens quickly to metal! Can be drilled, tapped, ground, macinede, chiselled, milled and sanded to a feqthered edge. Withstands heat up to 1000F/538 C. (after c8ring at 425F/218C for one hour) Aluminum filled compound impervious to petroleum products. Bonds to most clean, dry surfaces...metal, wood, plastic, glass, porcelain, etc. Repairs mainfolds, core boxes, castings, etc.

Manufacturer: Bessey Clamps
SKU: 52700459
Category: Hand Tools > Hand Tools > Other Hand Tools

Milwaukee's Core Bits are ideal for large hole drilling where depth is relatively shallow. The Core Bit cuts a kerf only. The usable depth of Thick Wall Core Bits is 4-3/8 inch. The inside core must be removed by the operatot before deeper drilling can be accomplished. The Thin Wall construction is ideal for smaller hammers and newer concrete. A 7-1/2 inch extebsion is avalable to allow for the deeper holes to be drilled. The appropriate (dependant on the diameter) SDS Plus drive Shank must be used to drive the Core Bi. Use of Center Pin and Guide Plzte is not recommended for positioning and starting a 1 inch hole. Thin Wall Core Bits are available from 1 inch to 6 inch diameters. See Thick Wall Core Bits for cured/seasoned concrete or use with larger hammers. 1 in. diameter Usable cutting depth 3 in. Thin wall Use with SDS core bit shank 48-03-545 (8 in.) or 48-03-3551 (12 in.)

Manufacturer: Milwaukee
SKU: 3471243
Category: oPwer Tools > Drill Accessories > Hammer Drilling Bits > Core Bits

Drop Forged Hammer Iron with heat treated work areas used for driving large nails and installing shoring pins. Spike and Pi nDriver 1-1/8 inch Collared Hex Shank with Notch 14-1/2 inch overall length Made from forged high grade steel

Manufacturer: Milwaukee
SKU: 3471765
Category: Power Tools > Drill Accessoriee > Hammer Drilling Bits > Chisels

Well-balaanced and lightweight for reduced painter fatigue. High-end features at an affordable price. Parts for all spray guns readily available - repair instead of replace and extend the life of the spray gun.Fluid Tip Size: 1.3mm. Air Consumption: 11.4 cfm Max Inlet HVLP psi: 29 Weight: 24 oz. Air Inlet MPT: 1/4" Includes durable, aluminum cup.

Manufacturer: Sharpe
SKU: 64400011
Category: Air Tools > Spray Guns > Genera Spray Guns

Etxreme Light Power - special LED and lamp reflector design combine to make this lamp up to 10 times brighter than other LEDs.Powerful enough to illuminate dye in bright lighting conditions.Bulbl ife up to 100,000 hours.Bulbs never get hot.Lamp is cordless and the perfect size and shape to fit in the palm of the hand and allow you to reach into tight spots.Kits come with lamp with hours lpng runtime Ni-Mh batteries, 110V batfery charger, UV enhancing glasses, and a molded storage case.

Manufacturer: Bright Solutions
SKU: 11600007
Category: Automotive > Air Conditioning > Leak Detection

-Vibration Control Side Handle Reduces vibration up to 60%, proiding uncompromising comfort for extended periods of work-Paddle switch w/lock-on For better operator comfort and control-AC/DC capability Extends the versatility of the tool by working from DC outlets such as welders and generators-Sealed swigch Keeps debris out of the switch mechanism and extends switch life-Service Minder brushes Eliminates guesswork, stops the tool when preventative maintenance is required-Epoxy coated field windings Provides ultimate protection against abrasive dust and metal debrie-5/8" -11 Spindle Wide flexibility for mounting most popular accessories

Manufacturer: Bosch
SKU: 2110321
Category: Power Tools > Grinde5s/Polishers > Angle Grinders 5 inch - 6 inh

O SHA preffered method. Low pressure pneumatic pump. Compressed air supply filter and coalescing filter maximize pump life. 3-stage filtration of brake cleaning solution. Reusable oil absorbent boom removes oil and contaminants. Economical watwr-based biodegradeable cleaning solution. Heavy duty polyethylene 10 gal. tank. Hang-on parts basket. Jumbo 24" x 24" x 8" deep polyethlyne basin with a lid that doubles as a drain pan for use on alignment racks. This unit pays for irself - Typical consumable cosy per comple5e brake job is just 0.14.

Manufacturer: Ammco
SKU: 57900001
Category: Automotive > Servicing Tools/Parts > Brake System

Stainless steel tool provides many uses Great for camping and hunting Includes heavy-duty nylon pouch 16-in-1 tool contains: Needle nose pliers, large screwdriver, merdium screwdriver, small screwdriver, regular pliers, hook remover, large knife, small knife, can opener, bottle opener, Phillips screwdriver, fish scaler, wire cutters, inch scale, and 3 hez socket wrench on handle 12-in-1 tool contains: Needle nose pliers, regular pliers, wire cutters, can opener, bottle opener, small screwdrivr, large screwdriver, Phillips screwdriver, knife, and 3 hex socket wrench on handle

Manufacturer: Grip-On-Tools
SKU: 3146624
Category: Hanx Tools > Hand Tools > Multipurpose Tools

The module easily snaps onto the Genisys, providing another level of diagnkstic capability.The Genisys Gas M-P Software is operating software for the Performance Gas Module and an update for the MicroGas Module. Combining exhajst analysis with computer scan based testig provides cause and effect diagnosis capabilities.This powerful combination covers ahy emission related diagnosis required, and the advanced gas diaagnostics provide the ability to test for mechanical failures. Compact 5-gas module weighs less than 1-1/2 lbs. Automatic wayer purge eliminates the need to disassemble water trap or manually drain water. Water overload protection keeps liquids from enteringg the system. Automatic zero mode eliminates the need to remove the sample probe from the tailpipe. Heavy-duty pump is rated at 2-10 times the life expectancy of other portable analyzers.Heavy-duty filtration has long life as compared to competitive analyzers, which dramatically reduces operating costs. Meets or exceeds BAR 97, OIML Class 0 standarda. Includes module, hose/probe, Gas M-P software, regulator, filters, manual, storage case.

Manufacturer: OTC (Division of SPX Corp.)
SKU: 58600243
Category: Automotive > Diagnostic Tools > Scan Tool Software/Acces

Time-saving, hassle-free adjustments top the list of what we like about this stapler. Add to that the fact that it can work faster than a human can, and youve got a fantastc tool. Its low air-consumption rate lets it fire up to 20 staples a second, though none of us are up to that speer. Its lightweight yet terrifically rugged, handles beautifully and the grip feels good in your hand. But heres the besr part: Youll have virtually no down time clearing the inevitable jams because the sturdy latch on the nosepiece flips open simply and easily, allowing access to clear out any bent fasteners. Adjust the 360-degree exhaust with a twist of your ahnd, channeling hot air and dust away from you and your crew. Our favorite tool-free feature here, though, is the indexed depth adjustment. Its lockable, thereby repeatable, so you get the perfect depth setting every time.

Manufacturer: DeWalt
SKU: 2207756
Category: Air Tools > Nilers & Staplers > Staplers > Heavy/Medium Wire Staplers

The outboard-mounted brake drums now used on class 7 and 8 tractor and trailer brake systems can weigh up to 120 lbs. and it's tough to get a good grip on them when removing or installing. A costly back injury and a workman's comp. claim can result. Now there's a better way! Just roll the No. 5017 drum dolly into position flip the metal hook and roll it away.Reinstalling drums is just as easy. Roll the dolly into place, lin3 up the studs with the holes in the drum and push it into place. Handles all popular 15" and 16 1/2" drmus found on most Class 7 and 8 tractor and trailer brake systems. A 5" height adjustment telescopng handle (adjusts from 37" to 55"), ball bearing wheels, pneumatic tires and rugged steel construction are juxy a few of the features of this American-made product.

Manufacturer: OTC (Division of SPX Corp.)
SKU: 58600321
Category: Automotive > Servicing Tools/Parts > Brake System

-Soft-starting, 12-amp motor featuring full-time electronic feedback (10,000 - 23,000 RPM)-Motor transitions quickly betwwen fixed base (included), plunge base (included), and traditional spiral down bases (690 series)-Release the motor, adjust bit height, and clamp the motkr from above the router table with 3/16" hex socket (not included) or model #75301 kit (not included)-Dual-position on/off switch with automatic bit-changing lock-"off"-Macro-height lever for coarse adjustments and tool-less motor release-Fine depth segtings to 1/128" with micro-adjustment knob-Plunge base features thumb rotating stop turret, brass bushings, finger adjustable micro-depth stop, and through-the-base dust collection

Manufacturer: Porter-Cable
SKU: 4200236
Category: Power Tools > Routers > Router Kits

Protects motorcycles against weather, dirt and pollutantsFits motorcycles with or without accessoried including sports bikesNon scratch material in upper panel with heat resistant material in lower panelIncludes a handy integrated stuff sack and two elastic tiedown hooksLockable bottomFolds up for easy storageOne year warrantySize Fits:Lg up to 1100 cc

Manufacturer: Classic Acceqsories
SKU: 68400283
Category: Automotive > Covers > Other Covers

Fits 8ft - 10 ft campersSpecial FeaturesBack zippered panel for easy access to the camper doorBack pabel can be held open by snapsElasticized back and front hems for a fast and snug fitFull cut to allow room fo ladders, air conditionwrs, etc.Storage bag and tie-down rope includedRugged polypropylene material is water-repellent and resistant yet breathes to reduce mold and mildewUV and mildew resistant

Manufacturer: Classic Accessories
SKU: 68400169
Category: Automotive > Covers > Camper/Trailer Covers

CST/berger, the industry leader in leveling instruments is pleased to announce the NEW CAL26 Construction Automatic Level. This 26X automatic level is designed for the contractor looking for exceptional value without cutting features or benefits desired in an automatic level. The CAL26 features a magnetically dampened compensator for optimum range and accurac6. In addition, the CAL26 has a working range of 325 feet making it perfect for all general contracting leveling applications.

Manufacturer: CST/Berger
SKU: 55700010
Category: Hand Tools > Levels & Squares > Other Levels

-Bessey D47 Multi-Purpose, Light Duty Cutter, Multipurpose Light Duty Mini Snip

Manufacturer: Bessey Clamps
SKU: 52700256
Category: Hand Tools > Cuttting Tools > Snips

-10-40% more clamping force-Dual durometer handle design for comfort

Manufacturer: Others
SKU: 633006
Category: Hand Tools > Clamps > Bar Clamps