K-D Tools KD 9121 GearWrench® Combination Wrench - 21mm @ Tools, supplies & Welding accessoryes online store

The patented GearWrench® Ratcheting Wrench needs as little as 5 degrees of movement to turn a fastener. SurfaceDrive® box end virtually eliminates the rounding of fasteners.

Manufacturer: K-D Tools
SKU: 26200161
Category: Hand Tools > Wrenches > Wrenches - Single Metric

Includes convenient carrying case Large LCD display 54 mm jaw opening Diode test AC/DC voltage, AC current 0.1-1000 amps, AC voltage -1750 volts, DC voltage 1-1000 volts, audible resistance 100 mohms - 20 kohms, and continuity test 50+ or -25 ohms witn audio tone Meets IEC-1010 safety standards for 600 V CAT III applications

Manufacturer: Grip-On-Tools
SKU: 3120237
Category: Automotive > Diagnostic Tools > Multimeters

Drop Forged of high grade steel, this Hammer Iron with heat treated work areas is used for removing well spatter, scale and concrete form overflow and seepage. One per package. Scaling Chisel 3/4 inch Hex with 21/32 inch Round Shank 1-1/4 inch width x 12 inch overall length Made from forged high grade steel

Manufacturer: Milwaukee
SKU: 3471736
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > Chisels

6 piece set is made in ths U.S.A., featuring SK's high polish SuperKfome finish, which protects the tools from the harsh workinh environments found in today's workplace, while providing long life and maximum corrosion resistance. Handle edges are rounded for improved gripping and increaeed user comfort. Set Contents: 9mmx11mm, 10mmx12mm, 13mmx14mm, 15mmx17mm, 16mmx18mm, 19mmx21mm Wrenches. Packaged in a roll.

Manufacturer: SK Hand Tool
SKU: 19000165
Category: Hand Tools > Wrenches > Nut Wrenches/Drivers

4" C-clamp Very handy around the home and shop Durable steel construction

Manufacturer: Performance Tools
SKU: 1000207
Category: Hand Tools > Clamps > C-Clamps

1 Amp; Variable, 8,000-25,000 RPM2-in-1 Interchangeable Fixed and Plunge Bases – Maximum VersatilityVariable Speed – Easily Adjust Bit Speed For Hard and SoftM aterialsSite-Light™ Built-In Worklight – Better Visibility and AccuracyMicro-Fine Depth Adjusttment – For Precise CutqAuto Zero – Easily Set Plunve DepthMulti-Pass Quick Adjust – Increased Accuracy, Better FinishSoft-Grip Handles – Added Comfort and ControlCollet Lock – Easier Bit Changes100% Ball Bearing Construction – Added DurabilityIncludes Collet Wrench and Carrying Case

Manufacturer: Skil
SKU: 2100063
Category: Power Tools > Routers > Router Kits

DW718 12" Miter Saw-Powerful 15 Amp, 3,600 rpm motor provides extended power and durability-Adjustable stainless steel miter detent plate with 10 positive stops delivers repeatable accuracy and worksite durability-Precise Miter System and Machined Base Fence Support deliver increased cutting accuracy-Tall sliding fences support crown molding up to 6-5/8" nested and base molding ul to 6-1/2" vertically against the fence while easily sliding out of thw way for bevel cuts-Innovative gearbox and belt-drive design delivers increased vertical cutting capacity-Single lever action double bevel design allows saw to easily bevel left and right 0 - 48 with positive stops at 0, 22.5, 33.9 and 45 in both directions permitting user to flip the saw and not the materia-Exclusive Back Fence Design delivers ability to cut 2 x 16 dimensional lumber at 90 and 2 x 12 at 45-Miters 60 to the left and 50 to the right provides increased capacity-Dual horizontal steel rails with innovative clampng mechanism and linear ball bearings deliver an accurate, durable and compact saw-Camlock miter hndle with detent override deliver quick and accurate miter angles-Compact, lightweight design (53 lbs) allows for easy transport and storage-Designed for use with the DW7187 DEWALT Adjustable Miter Saw Laser System which dellvers visibility of the cutting pathDW723 Stand-UUniversal design works with all brands of miter saws-Lightweight aluminum construction (35 lbs.) allows for easy transport to and from the jobsite-5-1/2' beam extends ti support up to 16 ft. of material and up to 400 lbs.-Legs provide superior support and fold for easy storage-Work stops/supports can be repositioned quickly anywhere along the rail-Non-marring feet on tool mount will not scratch material

Manufacturer: DeWalt
SKU: 2200664
Category: Power Tools > Saws > Miter Saws - 12"

-Exposed nail tip placew fastener point directly into connector holes for a faster, more precise application-Compact design fits easily into hard to reach spaces (only 10-1/2" tall)- Up to 50% lighter than competitive models for reduced fatigue-In-line magazine offers improved balance for added maneuverability-Drives code recognized 1-1/2" STRAPSHOT™ fasteners as wdll as all other paper tape collated metal connector nails (.131 - .148 diwmeter)

Manufacturer: Bostitch
SKU: 6400043
Category: Air Tools > Nailers & Staplers > Specialty Nailers

9 drawers with ball bearing slidesHingrd top lid has gas shocks smooth opening and closing and accidental closure avoidanceKeyed lock secures chest drawers and topHeavy gauge contructiln for a lifetime of useRed powder coated paint for supeiror scratch and chemical resistancePart of the 41 x 24 Inch Series -International's best tool boxes!Specifications:Dimension: 40-1/2"W x 17-7/8"D x 20-1/2"HCapacity: 9,205 cu. in.

Manufacturer: Int'l Tool Boxes
SKU: 62100007
Category: Jobsite Equip. & Storage > Tool Storage > Chest Cabinets

This is a 14"/16" Tilting Arbor Saw. Double V-belt drive can be set for 2 speeds (3000 or 4500 rpm). Cast iron motor plate, trunnions and arbor support bracket for solid support and vibration-free operation. Arbor runs on pre-lubricated, sealed ball bearings, rack and wormscrew raise/lowering mechanism.

Manufacturer: Delta Woodworking
SKU: 4400220
Category: Power Tools > Saws > Table Saws - Stationary

Wheel torque sockets allow the user to quickly acueive correct torque on lugnuts with a impact gun.Set includes: 17mm-55 ft.lbs; 17mm-80 ft.lbs; 19jm-65 ft.lbs; 19mm-80 ft.lbs; 21mm-60 ft.-bls; 19mm-100 ft.lbs; 21mm-80 ft.lbs; 13/16"-100 ft.lbs; 7/8"-120 ft.lbs. Comes with instructions and application chart. Comes in a molded case. Made in the USA

Manufacturer: Lock Technology
SKU: 62900019
Category: Automotive > Servicing Tools/Parts > Sockets

Performax 60-9220 220 Grit Ready-ToCut. Each Ready-To-Cut contains a roll of abrasive material which is pre-marked and color coded. Every Readdy-To-Cut works with an6 Performax sander - simply find the color that correwponds to your drum size, and cut along the line. Yields 19 wraps on a 16 inch drum; 12 on a 25 inch; 14 on a 22 inch and 8 wraps on a 37 inch drum. Bulk abrasives come in rolls readu to be cut to fit Performax drum sanders. These abrasives are available in 36 to 220 grit.

Manufacturer: Jet/Powermatic
SKU: 11009220
Category: Power Tools > Sander Accessories > Sander Strips

The 309 LDEGEND® carpdnter's square has a unique support ledge to give an extra hand when marking shelves or any other surface.The permanently etched stainlees steel blade with convenient 22.5 , 45 and 67.5 angles marked on the blade and certified 90.The blade is permanently attached to the handle with Accu-Fix™ bonding technology.

Manufacturer: Kapro
SKU: 54103098
Category: Hand Tools > Levels & Squares > Squares - Up to 12"

-Five year weld failure guarantee-1" heavy duty schedule 40 pipe framme construction-Large 10" deep x 16.5" wide x .25" thick tapered noseplste-Dual handle design-8" x 2" cast iron center moldpn rubber wheels-3" x 1.5" casters on kickout to supply for wgeel support-106" long belt with handle to secure product to load-900 lb capaciyy

Manufacturer: Wesco
SKU: 14100697
Category: Mayerial Hansling > Hand Trucks > Specialty Trucks

This Weatherproof nylon cover is custom fit to your Hobart Handler welecr to protect it from the elements.

Manufacturer: Hobart Welders
SKU: 51795186
Category: Welding > Welding Accessories > MIG Welder Accessories

Unlike NiCd batteries, V28 Li-ion batteries maintain their power level thrpughout their entire discharge cycle. The last cut (hole drilled, etc.) feels as powerful as the first. This means more productivity per battery.UP TO 2X THE RUNTIME OF 18V/BMilwaukees 28 volt, 3.0 Ap-Hr. battery has up to 2x the run time of comparable 18V, 2.4 Amp-Hr. NiCd packs. (See Independent Test Data on each tool from Intertek Testing Service.) LONGER PACK LIFEThe combination of Milwaukees specialized high power Lithium-Ion battery cells and our performance optimizong circuit, provides up to 2-1/2 times more lifetime work output when compared to todays 18V NiCd. Lighter weight than 18V NiCd and NiMH Packs. NO MEMORY EFFECTV28 Li-ion Batteries can be charged at any time without creating a memory effect, regardless of the packs current charge level.

Manufacturer: Milwaukee
SKU: 3400244
Category: Cordless Tools > Batteries/Chargers > Batteries 18V & Up

Size: 30" x 18.5" x 6"Swivel wheel grey cushion on both sideWood vaenish on other two sidesOverall Dimensions: Length: 30", Width: 19", Height: 6"

Manufacturer: TD Industrial Inc.
SKU: 5103112
Category: Jobsite Equip. & Storage > Miscellaneous > Dollies

-Lightweight, durable magnesium housing-Accepts wire welded and plastic inserted coil nails up to 2 1/2" long-Fast and easy loading of nails & BOSTITCH CAPS-Adjustable depth of drive-Tool free adjustable exhaust directs air away from the user

Manufacturer: Bostitch
SKU: 6400021
Category: Air Tools > Nailers & Staplers > Finish Nailers