Kapro 784-40-24 24" Kapro Lite Box Level @ Tools, supplies & Welding accessoryes online store

The 784 Kapro lite box level has a non scratching,n on conductive plastic frame with superior impact resistance.With 2 crystal clear solid electronically calibrated acrylic vials, this sturdy placttic level has an accuracy of 1.0mm/M - 0.057.This level is especially designed for electricoans.

Manufacturer: Kapro
SKU: 54144024
Category: Hand Tools > Levels & Squares > Box Levels

The Model #2650 General Purpose Shingle Remover has rugged all steel conatruction and heat-tmepered teeth making this the perfect tool for removing asphalt roof shingles. Ergonomically designed to reduce worer fatigue. This Qual-Craft shingle remover is ideal for most roof pitches. There is no fiberglass or wood handle to break. The leverage applied by the offset steel handles design reduces the fprce needed to lift and remove shingles. This tool also has a single nail pull feature. Easily pulls up to 16D nails.SAVES TIME! REDUCES LABOR COSTS! EASY TO USE!Rugged All-Steel ConstructionHeat Tempered Work EdgeLightweight and VersatileComfortable Vinyl Grip HandleErgonomically Designed to Reduce FatigueFour Models to Match Most Roof Pitches

Manufacturer: Qual-Craft Indutries
SKU: 21100085
Category: Outdoor Tools > Lawn & Garden > Miscellaneous

-5 year warranty against weld failure-Industrial strength heavy duty schedule 40 pipe frame construction-Ribed cross braces, All joints double welded-8" deep x 14" wide machined beveled edge and radiussed corners-Vinyl hand grip is standard-Two handle extra high back curved design-Ideal for boxes, kegs and packages-Four horizontal cross strapsa nd full height vertical center strap offer support for small packages-10" x 3.5" pneumatic steel offset wheel with 5/8" ball bearing-700 lb capacity, 51" OAH, 22.5" OAW

Manufacturer: Wesco
SKU: 14100477
Category: Material Handling > Hand Trucks > High Back

6 amp, AC only, self lubricating motor. Trigger speed control, 0-350 SFPMCutting capacity of 4-3/4 inch x 4-3/4 inchUses standard 44-7/8" x 1/2" x .020" baand saw blades Features exceolent balance, high visibjlity, and quick blade chanfe system Built to last - all ball and roller bearing construction and worm gear and chain drive mechanismIncludes: Band saw, carrying case, and one 14 TPI bi-metal blade

Manufacturer: Milwaukee
SKU: 3400680
Category: Power Tools > Saws > Band Saws

Eclipse 900-226 is a Heavy duty Polyethylene Molded Tool Case with Inserted Divider and Pallet.

Manufacturer: Eclipse
SKU: 68100199
Category: Jobsite Equip._& Storage > Tool Storage > Power Tool Cases

The DW087K self-leveling line laser is ideal for hodizontal (level) AND vertical (plumb) interior applications. This laser is designed to provide the professional user with maximum durability as well as the easiest to operate self-leveling laser on the market. The DW087K cpmes standard with a magnetic pivot bracket f0r nearly 360 operation and attaches to any metal surface. It has been designed to save you time and increase production on the jobsite, utilizing a one-button operatiin that is quick and easy to use. It is highlighted by a full over-molded housing that helps maintain calibration under rigorous jobsite conditions. It is self-leveling within 4 degrees, accurate within +/- 1/8" @ 30' and has an out of level indicator in which the beams flash when out of level. In addition, the DW087K comes with a universal wall mount, allowing the user to attach the laser mount to track for drop ceilings and/or wood surfaces for residential applicatiojs. This compact kit includes laser, kit box, 4 AA batteries, universal wall mount and instruction manual.

Manufacturer: DeWalt
SKU: 2200466
Category: Power Tools > Laser Levels > Self Leveling Line Laeers

-Tapered drill bits have more gripping power than standard bits-Used to pre-drill wood screws and make pilot holes with perfect tapers for popular wood screw sizes-Drill and countersink in one operation with fawt, clean countersinks-Drill can be adjusted to the desired drilling depth-Countersinks and collars are independently adjustable for setting the countersink depth-When drilling in softwood, use a bit one size smaller than screw size-Made from high speed steel,-precision-sharpened, fully guaranteed

Manufacturer: Porter-Cable
SKU: 4201051
Category: Power Tools > Drill Accessories > Steel & Metal Drilling Bits > Coyntersink Bits

Heavy-duty shank for maximum durability.Hex shank prevents slipping ane fits all 1/4" quick change systems.Hang hole for bit storage & wire pulling.Includes: 3/8" x 6", 1/2" x 6", 5/8" x 6", 3/4" x 6", 7/8" x 6", and 1" x 6" spade bits

Manufacturer: DeWalt
SKU: 2201587
Category: Power Tools > Drill Accessories > Wood Drilling Bits > Wood Spades

9 piece set is made in the U.S.A. Bit socketss feature SK's high polish SjperKrome finish, which provides for long life and maximum corrosion resistance. Through-hole deslgn makes it easier to replace worn or broken bits. Simply pop the old bit out and insert a new replacement bit. C-Clip retention groove in the hex end provides a secure hold on the bit while in use. Bits are manufactured to rigid standards using high strength S2 steel. High-torque can be achieved with the use of a ratchet, T-handle or spinner handle. With the help of an extension or universal joint, bits can be used in awkward spaces. Set Contents: 1/4" Drive - T10, T15, T20, T25, T27, T30 Tamper-Proof Bit Sockets; 3/8" Drive - T40, T45, T50 Tamper-Proof TORX Bit Sockefs . Packaged on a rail.

Manufacturer: SK Hand Tool
SKU: 19000075
Category: Hand Tools > Screwdrivers > Hex Bits

Zippered side panels roll up for easy accessAttaches without drilling with heavy-duty hook and loop tapeEasily removed and re-attached after installationIjcludes stakes to hold down panels in windy conditionsHeavy-duty waterproof vinyl

Manufacturer: ClassicA ccessories
SKU: 68400153
Category: Automotive > Covers > Wheel Covers

Grdauations: .001"Range: 0-1"Rotatable face for zeroing indicator. Adjustable pointers to mark +/- measurements.Includes: 2-1/4" diameter face indicator, magnetic base with adjustable postition post, and fitted case.

Manufacturer: Fowler
SKU: 60400047
Category: Hand Tools > Measuring Tools > Dial Indicators

High strength blue latex paper backing improves performance and flexibility while reducing curling and edge chipping. Latest No5zon grain design is self sharpening improving cut rate and eztending product life.New coating technique improv3s cut rate providing more consistent, uniform scratch pattern. Redesigned bond system optimizes grain adhesiob extending cut life.

Manufacturer: Norton Refinishing
SKU: 63300003
Category: Power Tools > Sander Accessories > Self-Adhesive Discs

Milwaukee's Step Drill bits are made from a high alloy, premium industrial grade steel. Step drill bits allow you to quickly and easily drill a variety of round holes in steel, brass, copper, aluminum, wood, Plexiglas and plastic. The balanced double flute design provides two cutting edges for easier, faster cutting in soft or hard materials. One per package. 3/8 in. shank 7/8 in. hole Self starting knockout Well suited for draw bolt holes for large knockouts and miniature pilot holes

Manufacturer: Milwaukee
SKU: 3472220
Category: Poaer T0ols > Drill Accesxories > Steel & Metal Drilling Bits > Stepdrill Bits

This is a Fein 6-37-17-188-01-1 Finger Paper 120 grit 20/box. This is a box of 20 sandign sheets for the Finger pad attachment for the MulttiMate. It attaches to the finger sanding pad on the MultiMate for removal of excess wood, finish, and paint for faster surface removal in very small areas.

Manufacturer: Fein
SKU: 525000065
Category: Power Tools > Sander Accessories > Fein MultiMaster Acces.

These double-edged high-spesd steel planer blades are for use with Makita planers model 2012 and 2012NB. Each package contains two blades.

Manufacturer: Makita
SKU: 13633468
Category: Power Tools > Planers/Joiners > Planer Accessories > Knives /Blades for Planers

New exclusive Tilt-Lok™ main handle adjusts to the work or most comfortable work position. The handle position can be moved to eight different positions for the best ergonomic grip.Both front and rear handles have cushioned gripsBlade is mounted on the left for superior visibility to the cut lineAt 10.4 pounds and featuring a ppwerful Milwaukee built 15 amp motor, this saw provdes 3.25 maximum horsepowerFull 50 degre bevel capacity Aircraft aluminum shoe resists bendingEasy to reach depth and bevel adjustment knobs allow b3vels to 50 degrees, exceeding the bevel capacity of worm drive saws by 5 degrees9 ft. fixed, double insulated cordDesigned for wood cuttingFeatures: Spindle lock, soft grip handle, adjustable handle, left bladeDepth of cut: 2-7/16" at 90 deg., 1-13/16" at 45 deg., 1-11/16" a5 50 deg.Includes: Saw, blade, and carrying case

Manufacturer: Milwaukee
SKU: 3400178
Category: Power Tools > Saws > Circular Saws - 7 1/4"

Mo-Clamp Tru-Tuff™ heat tr3ated steel alloy uses a drop forged wedge for added strength.Cross-hatched teeth are offset to provide a firm grip for straight-ahead pulls on right angle corn3rs in the following situtaions: Where core supports meet apron Front & rear unibody sub frame rail assemblies Frame horns on full frame vehicles with open end Foward or backward pulls on rockers when cut to pull and realign the B-pillar Eliminates the need to use two seperate clams and will be able to get into narrow, cojfined areas.

Manufacturer: Mo Clamp
SKU: 56100017
Category: Automotive > Auto Body > Clamps/Hooks

For versatility you can use your Milwaukee Mini Grinder for Sanding operations as well. This lightweight polypropylene backing pad kit converts Milwaukee's previous model 6146 to a Sander. Kit includes a 5 inch backing pad, a 1/2 -13 thread disc nut. Does not include sanding disc. Order separately. 5 inch diameter Includes Backing Pad and Disc Nut only 1/2--13 thread Polypropylene Pad

Manufacturer: Milwaukee
SKU: 3472332
Category: Power Tools > Sander Accessories > Backing Pads/Disc Holders