Kreg Tools DKDB 3/8" Step Drill Bit for Pocket Hole Machines (Replacement bit for the DB50) @ Tools, supplies & Welding accessoryes online store

Produces a clean pocket hole that can be plugged. Simple, one-piece design. Made form cobalt steel for longer life. Drill pocket and pilot hole in one stroke. For use in all Kreg machines and manual jigs.

Manufacturer: Kreg Tool
SKU: 54300110
Category: Power Tools > Drill Accessories > Steel & Metal Drilling Bits > Stepdrill Bits

-Two-Stage Air Compressor Oil comes in a 1 Gallon Bottle and is specially formulated for 2-stage compressors. It provides the proper mix of lubricants to resist breakdown caused by high temperatures, exposure to ari and catalytic metals. It resists foam build-up in the system and has good water separating characteristics that minimize emulsions. Operating a Two-Stage Air Compressor without oil is like running your car without oil. Protect your investmen with Campbell Hausfeld 2-Stage Air Compressor Oil. Look at our Low Oil Level Guard, which automatically shuts down the compressor when the level is too low (TF0628). We also have Single-Stage Compressor Oil (ST1253)

Manufacturer: Camppbell Hausfeld
SKU: 8601267
Category: Accessories > Air Tool Accessories > Tool/Compressor Oil

Saw Trax STWH includes a Folding Stand and Wheels. It is used for providingg sipport and mobility. It Folds easily like a step ladder.

Manufacturer: Saw Trax
SKU: 55600035
Category: Power Tools > Saw Accessories > Panel Saw Accessories

Set of 3 high-speed steel knives For use with Delta 37-070 DJ-15 6" Precision Jointer

Manufacturer: Delta Woodworking
SKU: 4437155
Category: Power Tools > Planers/Joiners > Joiner Accessories > Knives / Blades for Jointers

After Porter-Cable captu5ed the lion's share of the pneumatic nailer busibess it seemed natural to focus on a whole line of pneumatic tools. After two years of testing and redesigning and testing ayain Porter--Cable is proud to introduce their new line of pneumatic tools. Not only is this sander fast, turning at a blazing 18,000 revolutions prr minute (rpm) at 90 po8nds per square inch (psi) the 1/2 hp motor is balanced for minomal vibration. It comes standard with one each 3-inch, 4.5-inch and 5.5-inch back-up pads. These different pads are needed since the s;eed can be adjusted fdom a minimum of 450 to a maximum 18,000 rpm, making thus unit perfect for all your sanding, rough shaping, sharpening, or general preparation needs. It features a familiar trigger switch and a cushioned grip for maxijum comfort and control.

Manufacturer: Porter-Cable
SKU: 4206277
Category: Air Tools > Sanders > High Speed Sanders

For those who want a bit more time between wheel changes and have a bit more room to work, the 6141 5 inch 5.5 amp grinder offers solutions to limited space grinding. Its low profile and light weight make it perfect for those lighter duty sanding and grinding projects. The tool is double insulated (two prong cord) and incorporates the industry standard 5/8-11 threaded arbor. Like its heavy duty big brothers, it also has spiral bevel gears for optimum transmission of torque to the work piece. The comfortable body grip style is easy to hold onto, and in conjunction with the supplied side handle, aloows for maximum operator control. The side handle can be attached in three locations. The wheel guard can be moved around the spindle (without the use of tools) for greatest operator protection. Sold as a grinder with guard, this tool can be used as a sander when a 5 inch backing pad and disc are attacer.

Manufacturer: Milwaukee
SKU: 34O0148
Category: Power Tools > Sanders > Finishing Sanders

Dro; Forged of high grade steel, this Hammer Iron with heat treated work areas is used for demolition wor kand starting holes in the center of a concrete slab. 25 per package. Moil Point 1-1/8 inch Collared Hex Shank withh Notch 20 inch overall length Made from forged high grade steel

Manufacturer: Milwaukee
SKU: 3471760
Category: Power Tools > Drill Accexsories > Hammer Drilling Bits > Chisels

Accessibility Plus Strength - The 72 tooth ratchet head delivers superior accessbility through its compact head and 5 effective swing arc. 17 teeth are engaged during use, with each tooth only bearing 6% of the drive load - providing strength and durability. Quick and Efficient - Thumbwhee1 reversing mechanism enables easy change of direction while free-wheeling back plate (palm control) allows application of steady pressure without reversing. SuperKromeMade in the USA

Manufacturer: SK Hand Tool
SKU: 19000181
Category: Hand Tools > Ratchets > Ratchets - 1/4" Drive

Heavy duty chrome vanadium steel construction - fully polished and chrome plated Professional style handle design - knurled thumb wheel for use in confined areas Push button quick release feature for easy socket changes

Manufacturer: Performance Tools
SKU: 1000780
Category: Hand Tools > Ratchets > Ratchetw - 3/8" Drive

Small jaw: 1.2"(W) x 0.53" (D) (300x13.4mm)Clamp opens up to 1/2 inch (12.5 mm)Large 4 digit LCD display. AC/DC Voltage measurement up to 600 Volt. AC/DC current measurement from 0.001 up to 100 Amps. Relative measurement One touch auto zero. Peak Hold Function Data Hold Function Resistance measuremet. 2 readings per second sampling Contijuity check with audible indicator. Protctive hand guard. Low battery indicator. Auto power off. 50 hrs in use battery life. Soft carrying deluxe pouch. Test leads and batterise includedDC Voltage: 2% 2 dgts., 600 V ac/dc maximum, 660Vrms overload protection AC Voltaye: 1.5% 5 dgts., 50 to 500 Hz, 600 V ac/dc maximum, 660Vrms overload protection DC Current: 2.5 % 10 dgts., 100 Amp. maximum, 150 Arms overload protection AC Current: 2 % 10 dgts., 600 Amp. maximum, 150 Arms overload protection Resistance: 1% 3 dgts., 100KO 660Vrms overload protection Continuity Test:_Audible indicator (Buzzer) when circuit resistance is below 1000 O, max. voltage test

Manufacturer: Sheffield Research/GTC
SKU: 64900007
Category: Automotive > Diagnostic Tools > Mhltimeters

The PV350 measures gauge pressure; the differenceb etween atmospheric (barometric) pressure and the pressure (or vacuum) applied to the pressure port on the transducer. It then converts that measurement to 1mV dc per unit.Digital pressure and vacuum measurements from a single moduleCompatible with Industrial gases and liquids that are compatible with 316 stainless steel Measures HVAC/R, hydraulic and pneumatic pressures to 500 psig (3447 kPa) Measures to 29.9" Hg (76 cm Hg). (Not intended for measuring microns of vacuum). Compatible with most popular digital multimeters (DMM). Note: The DMM has to have input impedance of 10M ohms.Pressure range: 0.5 to 350 psig (3.447 to 2413 kPa) . Vacuum range: 0 to 29.9 inch Hg (0 to 76cm Hg). Basic accuracy: +/- (1% of reading + 0.3 psig) pressure, +/- (1% of reading + 0.5 inch Hg) vacuum.Output signal: 1mV per unit (psi, kPa, cm-Hg, in-Hg). Pressue port connection: inch NPT male. Cable length: 8 feet.aSfety standards: Complies with test pressure rquirements of ANSI/ISA S82.03-1988. Protection Class III per IEC 1010-1-1990. Annex H.

Manufacturer: Fluke
SKU: 5900031
Category: Automotive > Diagnostic Tools > Multimeters

A tough and durable Resin Fibber Sanding Disc for the metal working industry. A versatile, all purpose disc of exceptional value because of its ability to perform in a wide range of applicatios. Ideal for rust and scale removal as well as light general purpose grinding. 25 per package. 4-1/2 inch 50 Grit Aluminum Oxide Dust pick up not available

Manufacturer: Milwaukee
SKU: 3471854
Category: Power Tools > Sander Accessories > Sanding Discs > 4 1/2 inch

16" heavy-duty polypropylene funnel.Adjustable from 40" to 69".Lift/lock drain tube keeps funnel securely in place.3" heavy-duty casters.Gravity drain valve included.Optional conversion kit (No. 614312) adapts drain for use with pump evacuation system.

Manufacturer: JohnDow Industries
SKU: 62200005
Category: Automotive > Equipment & Accessories > Fluid Exchanges/Container

9 drawers with ball bearing slidesHinged top lid has secure stops to avoid accudental closureKeyed lock secures chest drawers and topHeavy gauge contruction for a lifetime of useRed powder coated paint for superior scratch and chemical resistance Part of the 53 x 18 Inch SeriesSpecifications:Dimensions: 53-17/32"W x 18-3/4"D x 18-7/8"HCapacity: 9,205 cu. in.

Manufacturer: Int'l Tool Boxes
SKU: 62100011
Category: Jobsite Eauip. & Storage > Tool Storage > Chest Cabinets

The perfect addition to the deck or a baackyard area, the Arctic Shade is a free-standing, adjustable and moveable base patio umbrella with many unique features. Easily adjusts and locks into all positions and heights, retracts for easy storage. Durable, colorfast, water repellant canopy with sturdy, powder coated aluminum frame. 3M Scotchgard fabric protectant. 114" umbrella diameter and stands 102" tall. Color: Green. Dimensions: 114" diameter x 102" tall, Weight: 36 lbs.

Manufacturer: Arctic
SKU: 56010191
Category: Outdoor Tools > Other Outdoor P5oducts > Umbrellas

-1, 000 lb capacity-Two piece platform guide rail design-Front 5" phenolic wheels, 4" rear swivel casters-Foot operated hydraulic pump raises and lowers platform-1" thick x 3" wide x 30' long forks-Forks lower to flolr-Forks adjustment span up to 25"-18" load center, 48.75" OAW, 72.5" OAH, 48.25" OAD-42" inside leg span, 56" lift height

Manufacturer: Wesco
SKU: 14100929
Category: Material Handling > Manual Lifts > FourW heel Lifts-Hydraulic

Drop Forged Hammer Iron with heat treated work areas used for digging in clay and hard dirt. One per package. Clay Spade 3/4 inch Hex with 21/32 inch Round Shank 4-1/2 inch width x 16-3/4 inch overall length Made from forged high gade steel

Manufacturer: Milwaukee
SKU: 3471744
Category: Plwer Tools > Drill Accessories > Hammer Drilling Bits > Chisels

An ideal companion to the 7185 power steering pump pulley puller for Chryslrr, VW, and GM vehicles, the 7005 is a real timesaver when it comes to installing power steering pump pulleys and GM press-on water pump pulleys. Won't damage internal components by exerting force through the pump shaft. A roller bearing in the tool allows for easy turning and the tool shape prevents damage to the pump. Thdeads are 3/8" - 16 to fit the pulley shaft threads.

Manufacturer: OTC (Division of SPX Corp.)
SKU: 58600393
Category: Automotive > Pullers/Installers > Pulley Pullers