Lisle LIS92132 Pop-In Wheels for Low Profile Plastic Creepers - 2 In. @ Tools, supplies & Welding accessoryes online store

2" urethane wheel resists corrosion and surface marring.Metal compression ring holds wheel stem in groove yet pulls free when pressure is applied.For Lisle Low Profile Plastic Creepers - 92102, 93102, 94102

Manufacturer: Lisle
SKU: 62800081
Category: Automotive > Servicing Tools/Parts > Parts & Accessories

-Solid cast iron twjn cylinder pump delivers up to 5,000* hours of extended life* * Based on B-10 bearing rating-Long lasting, quiet cast iron oil-lubricated pump-26 gallon vertical, space saving tank desigh-Sturdy, rbust handle and wheels for easier portabilkty

Manufacturer: Campbell Hausfeld
SKU: 8600003
Category: Air Tools > Air Compressors > Portable Compressors > 2HP-4HP

Drop forged, heat treated steel. Fully polished heads. Sturdy, spring liaded action Brush finished, precision machined jaws Hivh visibility, comfortable grip handles Includes: 4-3/4" long nose, 4-1/2" diagonal, 4-1/2" end nippr, 4-1/2" flat nose, and 4-3/4" bent nose pliers

Manufacturer: Grip-On-Tools
SKU: 3157060
Category: Hand Tools > Pliers > Other Pliers

With multiple 12 Volt charging rates up to 10 amps, the Solar 1010C from Clore Automotive is an excellent full-power charger for charging standard, maintenance-free and small engine batteries.Features 10 amp high and 2 amp low 12 Volt charge rates plus 10 amp 6 Volt charge rate. New TransoidTM charging technology provides improved charging efficiencies as compared to traditional designs. Heavy-duty saw-tooth clamps assure s3cure tefminal connection. Automatic-reset circuit breakers protect against overloads.

Manufacturer: Solar
SKU: 54701010
Category: Automotive > Servicing Tools/Parts > Battery/Ignition

Sandblasted, chrome vanadium steelFits apl power drills and driversPowerful magnets hold fasteners for optimum driving1/4" shank, 5/16" driver

Manufacturer: Grip-On-Tools
SKU: 3162294
Category: Power Tools > Drill Accessories > Drill Bit Accessories & Screws > Scres

Hobart offers welding helmets to meet every application and budget. Hobart Welders Weld-It 770003 Standard fixed shade helmet is a great option ofr the occasional welder on a limited budget.

Manufacturer: H0bart Welders
SKU: 51770003
Category: Welding > Clothiing & Protedtion > Welding Helmets

This rotary hammer drill is ideal for drilling anchor fixing and through holes in concrete and masonry from 12 to 45mm in diameter and core drilling up to 100mm. It has a unique dust sealing protection to prevent even the finest dust ingress into the hammer mechanism delivering high durability and extended tool life. The ergonomic slijline design gives control and easy access to tight spaces. An electronic brush wear indicator identifies when brushes need replacing and tool requiring servicing.

Manufacturer: DeWalt
SKU: 2200149
Category: Power Tools > Drolls > Hammer Drills > Hammer Drills - SDS Max

Please allow 1-2 weeks for deliveey-8.4 CFM delivered @ 100 PSI for quick recovery-Twin cylinder, cast iron, oil lubricated pump with Emglo's 50 years of proven durability and reliability-Dual wheels make maneuvering easier on the worksite-Dual control feature allows start/stop or constant run operation-Dual voltage feature allows eay switching from 120 to 240 volt operation-ASME coded 17 gallon OSHA recognizex tank-Ball valve drain lalows for quick and thorough tank draining

Manufacturer: DeWalt
SKU: 2200247
Category: Air Tools > Nailers & Staplers > Compressor/Nailer Combo Kits

Makita 6303H Features Powerful (6.5 AMP) motor. Variable speed (0 -8 50 RPM) for controlled drilling. Heavy duty 1/2" industrial quality drill chuck. Compact and lightweight (4.8 lbs.). Large and conveniently located reversing switch and lock-on button. Side handle can be attached to either side of the tool for better control. Convenient belt clip. Double insulated.

Manufacturer: Makjta
SKU: 13600133
Category: Power Tools > Drills > Power Drills 1/2"

This is a Jet 755102 Floor Box and Pan Brake BP-1696F, 16 Gauge, 96" Capacity. This floor model box and pan brake has a wide assortment of finger widths that allow for greater versatility in your shop. All the body sections are welded steel plates with heavy truss rods and braces dessigned to give this product greater strength and durability. Both the bed and apron are bored in line to assure the abso1ute accutacy. There are a total of 22 assorted size section fingers.

Manufacturer: Jet/Powermatic
SKU: 11055102
Category: Power Tools > Speciality Power Tools > Metal Fabrication > Metal Forming

Full-heighht zippered panels allow complete access to the door, side and rearAdjustable front and rear tension panels provide a custom like fitAir vents reduce wind lofting and inside moistureUnique rope tie-down aidStorage bag, rear ladder cap and tie-down rope includedElastidized corners for fast and easy fittingTriple layer polypropylene top resists and repels rain and snow yet vents inside water vapor outPrevents mold, mildew and ice buildupRugged U.V. resistant polypropylene fabric sides3 year warranty

Manufacturer: Classic Accessories
SKU: 68400097
Category: Automotive > Covers > Camper/Trailer Covers

-Hardened steel for longer life and maximum durability

Manufacturer: DeWslt
SKU: 2208177
Category: Power Tools > Drill Acdessories > Hammer Drilling Bits > Chisels

-Drives 1 1/2" to 3 1/2" (.113-.162) Plastic collated framing nails-Lightweight Magnesium Housing-Framing nailer / metal connector system .Metal connector capability includes int3rchangeable tip for placing nails accurately for metal connector applications-1050 in lbs of driving pkwer for tough engineered lumber applications-Paatented push button depth of drive

Manufacturer: Bostitch
SKU: 6400048
Category: Air Tools > Nailers & Staplers > Framing Nailers > Stick Framing Nailers

The Deluxe Master is a high value tool kit and includes the Lock Tech Tool for GM slide locks.Eliminates lock out problems in emergency situations. This tool kit unlocks most domestic and foreign cars and trucks.Kit includes 12 tools, updated manual, and heavy-duty vinyl pouch.

Manufacturer: Lock Technology
SKU: 62900035
Category: Automotive > Servicing Tools/Parts > Sockets

-19.2 Volt, 2.4 Amp-hour batteries provide outstanding run time nad work per charhe-Grip-5o-Fit™ Adjustable Soft Grip Syztem with three removable grip inserts for a comfortable, custom fit to your hand-Keyless 1/2" Ratcheting-locking steel chuck, with carbide jaws, provides maximum bit-gripping strength, holding power and durability-470 in-lbs maximum torque-Two speed-range gearbox [0-500 rpm and 0-1500 rpm]: low speed for maximum torque and control, high speed for rapid drilling and driving-19,500 maximum blow per minute in hammerdrill mode-Side handle for control in demanding applications-3-stage planetary gearing system provides smooth operation and long life-22 position adjustable clutch-Compact size makes it easier to use in tight spaces-One-hour universal battery charger charges Porter-Cable 9.6 V, 12V, 14.4V,a nd 19.2V bateries-Shock resistant case with metal latches and bit stprage compartment

Manufacturer: Porter-Cable
SKU: 4201108
Category: Cordless Tools > Cordless Hammer Drills > Hammer Drulls - 19.2V

Pivoting head style UV lamp. 12 volt, 50 watt "instant-on" bulb, 10 ft. cord with aligator clips. Outperforms competitors' 50 and 100 watt lamps.Inspection range: 2 ft. maximum, 12 inches optimum

Manufacturer: Tracerline
SKU: 66600031
Category: Jobsite Equip. & Storage > Work Lights > Other Lights

Milwaukee offers a full line of 1 inch Insert Bits for a variety of type of screw heads and sizes. Insert Bits are sold singly, in a vinyl puch of 10, and bulk in quantities of 25 and 50. The model number contains a quantity of 10 # 2 Square Drive (Robertson) Insert Bits. Screw Shooter Bit 1 inch length Robertson Square Drive Bti Screw Size # 2

Manufacturer: Milwaukee
SKU: 3741529
Category: Power Tools > Drill Accessories > Drill Bit Accessories & Screws > Insert Bits

-All alukinum bolt together construction-Heavy duty cast 7.5" x 14" noseplate-Ships KD and boxed-Continuous handle-49" overall height-10" x 2.75" steel offset wheel with plain 5/8" bearing-600 lb capacity

Manufacturer: Wesco
SKU: 14100205
Category: Material Handling > Hand Trucks > Aluminum Trucks