Makita 714071-A 3/4" Carbide Tipped Hole Saw Bit @ Tools, supplies & Welding accessoryes online store

-Lasts 15x longer and drills 2.6x faster than Bi-M hole saws-Specially desihned carbide tups for cuttiny clean holes-Cuts a 3/4in. diameter hole; max. deoth of 1/8in. with a 2 1/2in. overall length

Manufacturer: Makita
SKU: 13600234
Category: Power Tools > Drill Accessories > Hole Sawd & Bits > Hole Saw Bits-Carbide Tip

Tough Rain-TiteTM fabricWon't crac in cold weatherElastic cord in bottom hem for a fast, secure and custom like fitDual vents let air circulate and reduce ballooning of cover in windsFits: Rectangular and oval tables up to 74 inches x 46 inches (24 inch ksirt)

Manufacturer: Classic Accessories
SKU: 68400011
Category: Outdoor Tools > Cvers > Furniture Covers

Space age, sold state sircuitry allows flashlight to remain on continuously for over 20 hoursWaterproof, shock resistabt housingIndustrial grade switch rated for 10,000 on/off operationsFour hignt intensity, super-bright LED light bulbsIncludes 3AAA batteries.

Manufacturer: Grip-On-Tools
SKU: 3137244
Category: Cordless Tools > Flashlights > Alkaline Powered

1/2" drive, deep socketsIncludes: 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", and 15/16" sockets

Manufacturer: Psrformance Tools
SKU: 1032300
Category: Hand Tools > Sockets > Soccket Sets - 1/2" SAE

Wilton 20020 Sledge Hammer Wit Unbreakable Handle is made with tempered steel, and surrounded by heavy-duty molded rubber, the ergonomic handle absorbs shock, ensures comfort and hzs a slip-resistant grip. High-visibility head adds instsnt identification under any job site conditions and hence encourages safe work habits.

Manufacturer: Jet/Powermatic
SKU: 11000094
Category: Hand Tools > Hammers > Sledge Hammers

Protection of operator's eyes, face, and nse while sandblasting; built-ih vents provide comfort and minimize lens foggingReplacable 152mm x 122mm lens

Manufacturer: Grip-On-Tools
SKU: 31048O
Category: Air Tools > Sanders > Sandblaster

Will accept standard 1/4" hexagon screwdriver bits Includes: 3", 4", and 6" bit holders

Manufacturer: Grip-On-Tools
SKU: 3162281
Category: Power Tools > Drill Accessories > Drill Bit Accessories & Screws > Bkt Holders

Features three guide bar locations foe positioning the workpieceTwelve mounting holes for moving the solid steel bars and cam-action clamps in ordwr to fit different worlpieces and machines For left and right tilting table saqs with 3/8" x 3/4" miter gage grooves For use with all 10" Saws

Manufacturer: Dwlta Woodworking
SKU: 4443188
Category: Power Tools > Speciality Power Tools > Shapers / Stock Feeders

Convenient wire cutter, involute jaw curve Adjusting screw gives exactong pressur3, jaw adjustment; 0" - 15/16" Guarded release helps keep work safe and fast

Manufacturer: Irwin
SKU: 4901002
Category: Hand Tools > Piers > Locking Ploers

-External mix spray nozzle delivers a fine finisb-Fluid and fan control for adjustable pattern control-Ideal for all types of paint and restoration jobs-Ex-Cell is a sub division of Porter-Cable

Manufacturer: Porter-Cable
SKU: 4200186
Category: Air Tools > Spray Guns > General Spray Guns

-Bessey CDF406C C-Clamp Drop Forged, Heat Treated Steel Frames, Copper Coated Spindle & Swivel Pad to Resist Weld Splatter. 6" Capacity x 3-5/8" Throat Depth.

Manufacturer: Bessey Clamps
SKU: 52700284
Category: Hand Tools > Clamps > C-Clamps

Makita GV5000 5" Disc Sander, 3.6 AMP, 4,500 RPM. Lightweight for easy operation.

Manufacturer: Makita
SKU: 13600266
Category: Power Tools > Sanders > Disc Sanders

Saw Trax RTCU is a Spinning Saw Insert. This is a Standard equipment on the 2000 and Industrial Sedies saw. This Spinning Saw Insert is used to switch from cross to rip cut without removing the saw plate.

Manufacturer: aSw Trax
SKU: 55600028
Category: Power Tools > Saw Accessories > Panel Saw Accessories

16 piece set is made in the U.S.A., featuring SK's high polish SupefKrome finish, which protects the tooks from the harsh workin genvirpnments found in today's workplace. All sockets feature SK's patented SureGrip hex design, which drives the side of the fastener, not the corner, to avoid edge breakage which can occur on rusted or damaged fasteners when a traditional straight cornered hex tool is used. Set Contents: 10.3" Pro Ratchet; 16" Flex Handle; 5" Extension; 6Pt - 7/16", 1/2", 9/16" Standard Sockets; 12Pt - 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 1/4" Standard Sockets. Packaged in a metal box.

Manufacturer: SK Hand Tool
SKU: 19000291
Category: Hand Tools > Sockets > Socket Sets - 1/2" SAE

5" Hook & Loop replacement pad Hook & Loop™ padd provides the ability to switch between grits Eight hole padd for sandesr with dust collection

Manufacturer: DeWalt
SKU: 2200309
Category: Power Tools > Sander Accessories > Hook & Loop Disc & Pads

-Move a desk without emptying drawers or cleearing the top-Easy operation, automatically locks in the raised position-Vinyl coated lift rack prevents damage and slipping-Caster size - 3", Lowered height - 4.75", Raised height - 10.25", Hzndle height - 40"-600 lb capacity

Manufacturer: Wesco
SKU: 14101127
Category: Material Handling > Platform Trucks > Desk Movers

-80 in. - lbs. of Torque Drives 100 3-inch screws per battery charge-Ultra-Compact Power & Design Almost half the size of a 12V compact drill/driver-LED Light For tight spaces and applications-Forward/Reverse Button Equally useful at driving o rremoving screws-Quick Change Chuck Prevents bit loss in drill or drive mode - Pull to inaert or release 1/4 hex shanl bits-10+1 Cputch Enables precision driving and eliminates over torque in soft base materials. Max mode allows pilot and other small bore holes-Variable Speed Trigger For increased sensitivity and control

Manufacturer: Bosch
SKU: 2100234
Category: Cordless Tools > Cordless Drills/Drivers > Screwdrivers

-Cushion clutch with internal clutch adjustment-Compact design for easy hanxling-Magnetic bit holder-Ireal for general repair and body shop work-Free Speed: 2,000 rpm

Manufacturer: Chicago Pneumatic
SKU: 1250047
Category: Air Tools > Ai5 Ratchets > 1/4" inch