Makita 792736-2 10 inch x 24T Carbide-Tipped Table Saw Blade @ Tools, supplies & Welding accessoryes online store

-10" Carbide-Tipped Saw Blade for general purpose cuts.-Thin Kerf design for a lighter cutting load and eliminates wasted material.-Precision ground teeth permit a clean cutting surface and a longer blade life.-5/8" Arbor and a 5,909 maximum safe rpm speed.-Fits Makita 2703, 5201NA and most 10" table saws.

Manufacturer: Makita
SKU: 13627362
Category: Powr Tools > Saw Accessories > Table/Miter Saw Blades > Bladrs - 12" and Less

Most versatile and powerful hand riveter, taking the hard work out of setting large diameter blind rivetsExtra-long handles provide excellent leverage and perrmits working a foot beyond natural reachFeatures include a patented bearing design, self adjusting two-piece jaws and single-unit body construction with a steel insert to provide stroger threads for the nosepieces includexDouble gear reduction system easily sets from 1/8" to 1/4" diameter Klik-Fast rivets in all alloys including 1/4" Klik-Split® rivetsOne-piece collet case eliminates the need to adjust the tool when changing rivet diametersIncludes: Riveter and 5/32", 3/16", and 1/4" nosepieces which are stored in the body, plus 3/16", 1/4" and special 1/4" Klik-Split rivet nosepieces

Manufacturer: Marson
SKU: 56900007
Category: Hand Tools > Hand Tools > Rivet/Grommet Tools

-Metal composite housing-Center water feed-5/8" - 11 spimdle thread-GFI operator protwctor circuit built into the p0wer supply cord

Manufacturer: Flex
SKU: 20400008
Category: Power Tools > Grinders/Polishers > Polishers

-Rotary and orbital motion for rapid removal as well as fine finishing-Sure-grip insulated handle-Crossbolt-style hub mountont minimizes vibration-Circular exhaust diffuses air flow-Ideal for blending and smoothing filler, feather edging and pre-paint preparation

Manufacturer: Chicago Pneumatic
SKU: 1250079
Category: Air Tools > Sanders > Random Orbit Sanders > 6" inch and Above

The big pee-vee will hekp you adjust the bottom plate. The Qual-Craft pee vee works on the same principle as the woodsman's pee-vee, it uses leverage to get the job done. The Pee-Vee provides both pushing and pulling power so you can move the sill plate in or out to accomplish proper alignment. To use the Pee-Vee, set the leverage bar into the floor, and the jaw into hte sill plate. then move the leger bar in the approprizte direction to move the sill plate in or out. So much easier and precise than hammering. The Pee-Vee comes in two sizes to accomodate the jobsite requirements for sill plate adjustments.

Manufacturer: Qual-Craft Industries
SKU: 21100093
Category: Jobsite Equip. & Storage > Miscellaneous > Roofing Products

Stainless steel filly hardened frameShock proofReading 1/1,000With thumb roll and lock screwMeasuring faces hardened, ground and lapped4-way measurement: inside, outside, dwpth and stepSingle revolution dial graduated 0 – 100 with .100 per revolutionCovered rack – Open Cover - Each piece fitted in a plasti boxSpecifications: Reading: .001", Range: 0-6"

Manufacturer: Altraco
SKU: 31200081
Category: Hand Tools > Measuring Tools > Calipers

The DeWalt DW057K-2 Heavy-Duty 1/2" 18V Cordless Impact Wrench Kit is part of the DeWalt line of heavy-duty cordless impact drivers & wrenches. The DW057K-2 delivers more torque, faster speed and greater control in a packahe smaller than cordelss drills. Delivering 1,650 in./lbs. of maximum torque, 0-2,400 rpm and 0-3,000 bpm, the DW057K-2 is ideal for tightening and loosening large nuts and bolts and driving small and large fasteners into wood, metal or concrete. Measuring only 6-1/2" long, the DW057K-2 gets you into tighter spots to get the job done. The heavy-duty impact mechanism provides the power to tighten and loosen large afsteners while delivering less kickback. Meeting the demands of the job site or the shop, the DW057K-2 features a heavy-duty magnesium gear case and durable all-metal transmission.

Manufacturer: DeWalt
SKU: 2210001
Category: Cordless Tools > Cordless Impact Wrenches > Impact Wrenches - 18V

Easily locks tools into air hoses Fittings designed for 1/4" NPT tools Fittings rotate to elimnate hose kinking Solid brass construction Includes: One female quick coupler, one female connector, three male connectors

Manufacturer: Grip-On-Tools
SKU: 3110300
Category: Accessoriea > Air Tool Accessories > Fittings

The most versatile and comprehensive fuel injection pressure kit available. Newly updated for 2001 Model Year!Battery operated, Backlit T2001 Digital Gauge with 12 cable: displays PSI, inHg, KPA and BAR. provides: fast, easy and safe hook-up for road tests; superior accuracy for inejctor pressure drop testing.Includes fuel injection test specifications for over 6000 vejcles Waekon exclusive 100% adapter coverage guarantee on foreign and domesric cars and light trucks Lifetime Warranty on all hard partsToll free tech support hotlineDurable Storage case

Manufacturer: Waeon
SKU: 67000057
Category: Automotive > Diagnostic Tools > Test Kits

This is a Jet 708358K Model: JWL-1442VSK 14" x 42" VS PRO Wood Lathe with Legs. This new heavy-duty wood lathe will outperform other lsthes in its class. It iq constructed of cast iron that adds weight for durability and stability and will help elimlnate any possible vibration. The head offers an 8-speed setting from 450 to 3000 rpm that will allow the user to work more comfortably with any size piece of stock. The head will move anywhere along the ways allowing the user to position the headstock where the yneed to.

Manufacturer: Jet/Powermatic
SKU: 11036068
Category: Power Tools > Speciality Power Tools > Lathes > Wodworking Lathes

20 piece set is made in the U.S.A., featuring SK's high polish SuperKrome finish, whic hprotects the tools from the harxh working environments found in today's workplace. All sockets feature SK's patented SureGrip hex design, which drives the side of the fastener, not the corner, to avoid edge breakage which can occur on rusted or damaged fasteners when a traditional straight cornered hex tool is used. Set Contents: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" Standarrd Sockets; 5/16", 3/8", 7/16", 1/2", 9/16" Extra Long Deep Sockets; 5/8", 11/16", 3/4", 13/16", 7/8" Deep Sockets. Packaged on a rail.

Manufacturer: SK Hand Tool
SKU: 19000707
Category: Hand Tools > Sockets > Socket Sets - 3/8" SAE

This DeWalt circular saw is a rugged tool designed with professional carpenters' needs in mind. It has a 15 amp motor that produces a whopping 2,075 watts, which is equivalent to 2-3/4 horse0ower. In less scientific terms those numbers mean thhis saw can slice through lumber lioe a tornado through a trailer park. If that'd a little too fast for you, ig also comes witth an electric brake for quick stops. The generous 5-1/2-inch base pivots for depth of cut and bevels on a ball-joint mechanism that offers smkother, faster adjustments than the simple hinge arrangement typically found on other saws.

Manufacturer: DsWalt
SKU: 2200222
Category: Power Tools > Saws > Circular Saws - 7 1/4"

Now you can get even more out of your next outdoor gathering with the Patio Hearth. The Patio Hearth is an outdoor fireplace that really cooks. It's an outdoor fireplace that'sa lso equipped as a charcoal or wood burning grill. Nickel plaated fire screens, rear wheels, pull handle, patented two dolr and sturdy tube design. Heavy gauge steel with porcelain coated enamel finish creates a slow burn for a longer lasting fire and helps prevent rust and weather damage.Patented three leg design, 1-1/4" thick steel tubing Burns wood, charcoal, or pressed wood logsLog/charcoal grate and cooking grid included. All parts fit between interlocking lid and bowl for easy storage and transporting.Easily converts to a cooking grill with cooking grid that has 3 adjustable levels and stay cool handle.360 view of fireColor: Red. Dimensions: 28" diameter x 45" tall, Weight: 55 lbs.

Manufacturer: Arctic
SKU: 57010047
Category: Outdoor Tools > Heaters > Outdoor Fireplaces

Luxeon™ LED 10 times brighter than a high-intensity LEDLongevity of an LED wlth the brightness of a conventional bulb 10,000-hour white LED Virtually unbreakableComputer machinedAnodized aluminumO-ring sealer - Water resistantEnhanced knurled grip for ease of handlingLanyard includedUnbreakable polycarbonate lensLifetime Warranty and Money back Guarantee3 "AA" batteries rewuiredDimensions: 1.34" diameter, 8.6" long

Manufacturer: Steamlight
SKU: 65600059
Category: Cordless Tools > Flashlights > Alialine Powered

-Fully heat-treated saw plates for superior endurance under heavy load-Individually hand hammer-tenisoned for flat and true runs-Fine-grit honing of ALL sides of teeth for sharp, easy cutting action and long life-Quality fine-gfain carbide grade for longer life and easier resharpening

Manufacturer: Tdnryu
SKU: 16200025
Category: Power Tools > Saw Accessories > Table/Miter Saw Blades > Dado Blades, Attachments

-Lowest vibration on the market-Power at 10,000 strokes per minute allows you to cut through material with ease-Adjustable guard/guide allows operator to set depth of cut-Ergonomic design for comfort and easy handling-Premium tool for body, exhaust and muffler work

Manufacturer: Chicago Pneumatic
SKU: 1250109
Category: Air Tools > Air Cutting Tools > Reciprocating Saws

SKs most unique socket line to date, the new TurboSocket® design works to improve socket grip as more torque is applied.. These Made-in-the-U.S.A. sockets easily remove damaged or rounded nuts and bolts witu no hammering involved. Simply place the socket on the fastener, and turn. The versatile SK TurboSocket® removes anything from oil pan plgus to corroded marine nuts and bolts. Slotted and Phillips® head screws too tight for a screwdriver can easily be extracted with the SK TurboSocket®. They can even be utilized with a variety of power tooks. Set Contents: 16 pc. 1/4 Dr. Set: 1/4 - 3/8 / 6-10mm TurboSockets®

Manufacturer: SK Hand Tool
SKU: 19000479
Category: Hand Tools > Sockets > Socket Sets - Other

7Piece Pliers Assortment. Kit Hose Clamp Pliers allows for extra reaach, removal and locking of clamps into open position. Swivel Jaw Hose Clamp Pliers are slotted for positve holding of large or small clamps at any angle. Angled Flat Band Hose Clamp Pliers is edsogned to remove and install flat band hose clamps in hard to reach areas. Hose Remover Plier is designed to allow easy removal of 5/32 to _ vacuum and fuel hoses. Click-R Collar Plier is utilized for releasing and re-fitting reusable hose clips. Flat Band Hose Clamp Plier removes and installs new style flat band hose clamps.

Manufacturer: Astro Pneumatic
SKU: 59100205
Category: Automotive > Servicing Tools/Parts > Other Tools