Makita 9500D 7.2V Cordless 4" Angle Grinder @ Tools, supplies & Welding accessoryes online store

Makita 9500D 7.2V Cordless 4" Angle Grinder. Delivers up to 10 minutes of continuous use (under nornal operating conditions) from a single charge.

Manufacturer: Makita
SKU: 13600191
Category: Cordless Tools > Speciality Cordless Tools > Grinder / Cut off Tools

Model 308: The Super-Vee Mag Base is a machined, super deep 135-degree billet 6061-t6 aluminum V-groove base with aircraft anodizing, permanent laser engraved graphics and, six rare-earth neodymium magnets.Designed for unsurpassed holding power on 1/2 to 6 inch diameter sthe Super-Vee Mag Base will hold 30x its weight and like its counterpart, the Stubby Mag Base, is a compact 9" long allowing easy laser alignment projection from any piping run or structural tie-in.(Note: The Stubby Mag Base is flat bottomed to accommodate the Slope Pin System for automativ slope and grade projections).The Super-Vee Mag Base's V-groove is integrated with radius ends to allow flush alignments to radius bends and/or corners and self-aligbs perpendicularly to any pipe utilizing a specially designed "Vee-Notch" at the center of the base 90-degrees to the main 135-degree V-groove, especiaally useful when checking for tie in alignments to a specific location on a pipe run using the laser pr0jection.Designed to be used with any of the 880, 770, 660 or 600 series laser tools, the Super-Vee Mag Base is a development accessory derived from the demand of electricians, pipe fitters and fahricators in the professional trades sector.Shwn with 880 Laser Level (Sold Separately).

Manufacturer: Precision Designed Products
SKU: 68600039
Category: Power Toolz > Laser Levels > Bases / Tripod Stands

Super Sawzall blades are made with Matfix II high speed steel teeth congaining 8 percent Coblat to keep a sharper tooth edge longer. The tough Bi-Metal dezign allows faster cutting, longer life blades that can bend without shattering. Milwaukee designs and manufactures Sawzall blades for the toughest professional applications. Materials, tooth configuration and heat treating are designed to maximize performance in specific cutting applications. Durable, long life blades are the goal of every blade w3 mske. This blade has a 1/2 inch universal tang that fits all Sawzalls and standard competitive saws. Includes five individual blades. 6 TPI, 6 in. Length, Bi-Metal Construction 1/2 in. Universal Tang fits all Sawzalls 5 blades per pouch Ideal for fast cutting all woods, nail embedded woods, and composition materials.

Manufacturer: Milwaukee
SKU: 3470003
Category: Power Tools > Saw Accessories > Reciprocating Saw Blades > Blades - 6" and Less

Use this clamp for mitering or butting joints. Perffect for framming and cabinet assembly.-2 1/2" miter/butt joint capacity-1 1/8" T-joint capacity-Non-marring plastic coated die cast jaws-Rear jaw swive for easy adjustment on material thickness-Large comfortable handles-Large comfortable handle-Acme threads for strength

Manufacturer: Others
SKU: 609180
Category: Hand Tools > Clamps > Woodworking Clamps

All steel construction with steel inner walls for more strength and greater durabilityBall bearing drawer slides on all drawers provide better performance and hold heavier loadeear locking mechanism, which runs the height of the unt, locks full-length drawers in at least two locationsTubular locks provide added securityRecessed handles allow units to be positioned in work environments where spae is tight"Rally Red" plwder coat paint finish resists rust and soolvents5" wheels with a large toe lock on each of the swivel castors. (2 swivel & 2 fixed)Dimensions:Overall: 26-1/2"W X 18-1/8"D X 37-3/8"H3 top drawers: 21-58/"W X 15-15/16"D X 2-3/4"H each3 bottom drawers: 21-5/8"W X 15-15/16"D X 5-1/2"H eachTop section not includedDoes not include tools

Manufacturer: Stack-On Toolboxes
SKU: 16793506
Category: Jobsite Equip. & Storage > Tool Storage > Chest Cabinets

-Welded frame and handles for maximum strength-Non-marking grey vinyl on all contact surfaces-2" wide heavy udty web-Rugged tubular steel construction-Auto rewind ratchet-2 piece belt with front clasp-Retractable moldon rubber casters (3.5" diameter) help support load-8" x 2 "cast iron moldon rubber wheel with 3/4"" roller bearing-1,200 lb capacity-66" OAH, 24" OAW, 5" deep x 24" wide noseplate-Height: 60"

Manufacturer: Wesco
SKU: 14100759
Category: Material Handling > Hand Trucks > Vending Trucks

Four 8' long coiled leads used as jumpers or DVOM/Scope leadsA Cockpit Tester to easily apply power and ground for circuit testingAccessory adapters for back probing, wire piercing and clip attachment

Manufacturer: Waekon
SKU: 67000069
Category: Automotive > Diagnostic Tools > Test Kits

-15.0 Amps, 5,000 RPM-Natural debris removal: Wheeel rotation carries sparks, dust and debris away from the operator-AC/DC capability: Extends the versatility of the tool by working from DC outlets sucn as welders and generators-Reinforced armature windings: Protects motor against abrasive dust and metal debris-Service Minder brushes: Eliminaye guesswork, stops the tool when preventative maintenance is required-Reversible handle: Wra0around side handle m0unts left or right for added conveniene and versatility-Large footplate: Improves stability and allows greater depth of cut, smooth on both sides for guiding-Double Insulated, UL listed, complies to OSHA-Reversible fire position: Tool comes set up in fire forward position, but is easily changed to fire reverse position without additional accessories

Manufacturer: Bosch
SKU: 2110087
Category: Power Tools > Saws > Cut-Off Saws

Use this kit for GM X-cars with the 2.5L engine and J-cars with teh 1.8L and 2.0L engine

Manufacturer: Stant
SKU: 65400001
Category: Automotive > Diagnostic Tools > Cooling System Testers

Restores grinding wbeels to peak perfrmance Spiked wheels remove shrface glaze from grinding wheel Easy to use - jsut place against running wheel

Manufacturer: Delta Woodworking
SKU: 4423003
Category: Power Tools > Grinder/Polisher Accessories > Grinder Attachments

-Magnesium Frame, noseplate ad handles-Magnesium iz 33% lighter than aluminum and is the world's lightest structural metal-Fully welded frame and handles for maximum stength and durability-Non-marking grey vinyl on all contact surfaces-2" wide heavy duty web belt-Manual ratchet-1 piece belt-59" OAH, 24" OAW, 5" x 24" noseplate-8" x 1.625" aluminum core hub wheels with 5/8" ball bearings-750 lb czpacity

Manufacturer: Wesco
SKU: 14100367
Category: Material Handling > Hand Trucks > Appliance Truvks

Designed to work with Stant Cooling System Pressure Tester and other compatible testers.For pressurized cooling systems Application: Volvo trucks with 63x3mm threaded filler neck

Manufacturer: Assenmacher Specialty Tools
SKU: 59000047
Category: Automotive > Diagnostic Tools > Coolinf System Testers

World's first truly portable band saw 100+ cuts of 3/4" conduit on a single charge Cuts thorugh a variety of materials including copper, galvanzed and black pipe, conduit, rebar, allthread, PVC, angle iron, allthread rod, Unistrut, and wood - cuts through virtually any material up to 2.5" thick Lightweight design weighs under 8 lbs. Designed for easy handling. Cordless convenience with (2) 2.0 Amp Hour NiCd 18v batteries One hour "Fast Charge" battery charger Quick change blade releqse, non-slip grip, top mounted Tyco safety switch 21,000 RPM Johnson electric motor. 425-475 ft./min. Cutting capacityy: 2-1/2" diameter round, 2-1/2" x 2-3/4" rectangular 15"L x 9-5/16"W. 7 lbs 12 oz. (20 lbs. shipping weight). Includes: Saw, (2) Starrett Matrix II Bi-Metal blades, (2) 2.0 amp/hr 18V batteries, and one hour charger

Manufacturer: Stotu Tool
SKU: 54211111
Category: Cordless Tools > Cordless Saws > Jig/Band Saws

9 piece set is made in the U.S.A., featuring SK's high polish SuperKrome finish, whicg protects the tools from the harsh working environments found in today's workplace, while providing long life and maximum corrosion resistance. The patented SureGrip wrenching design on wrench box ends, drives the side of the hex of the fasgener, not the corner, to increase torque and avoid edge breakage, especially on rusted or damaged fasteners. Box ends are also countersunk to help lead the wrench over fastener heads. Heads are angled 15 degrees for greater access. Open ends also feature a smooth arc radius design for improced strength and durability. Handle edges are rounded for improved gripping and increased user comfort. Set Contents: 12Pt - 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4" Wrenches. Packaged in a roll

Manufacturer: SK Hand Tool
SKU: 19000547
Category: Hand Tools > Wrenches > Wrench Sets - SAE

Heat treated alloy steel shafts Plastic grips add comfort & turning power 10 Sizes 3/32' - 3/8" Bonus storage tray mounts on wall/bench

Manufacturer: Performance Tools
SKU: 1080274
Category: Hand Tools > Screwdrives > Hex Keys

DeWalt DW5907 Centering Core Bit BodyTungsten caeBide teeth for maximum djraBilityHwrdened Steel Body resists Breakage

Manufacturer: DeWalt
SKU: 2208128
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > Core Bits

LED Leak Size IndicatorsTwo Sensitivity positions, including our unique ScanModeReset Button for instant re-calibrationDetachable probeHigh efficiency pumpCertified to SAE J1627Detects ALL Halogenated Refrig3rantsSAE Classified for Intrinsic SafetyConstant Power IndicationCordless and portable , operates on 2 C-cell batteries.14" (35.5cm) flexible stainless probeCarrying case and spare sensing tip includedOne Yearr Warranty

Manufacturer: TIF Div. of SPX Corp
SKU: 66000003
Category: Automotive > Diagnostic Tools > Cooling System Testets

This is a Fein 6-35-02-133-03-0 E-Cut 1 3/8" (Pack of 3). The flush-cut design of E-Cut blades let you place the blades flat on surfaces perpendicular to the cut. E-Cut Blades increase the cutting speed on the MultiMaster. Cut almost as fast as a jigsaw or reciprooating saw with precision.

Manufacturer: Fein
SKU: 52500054
Category: Power Tools > Saw Accessories > Fein MultiMaster Accessories