Makita 965210222 14" Cut-Off Wheel Blade for 7311 Cut-Off Saw @ Tools, supplies & Welding accessoryes online store

-Makita 965210222 14" Cut-Off Wheel Blade for 73111 Cut-Off Saw

Manufacturer: Makita
SKU: 13600429
Category: Power Tools > Saw Accessories > Circular Saw Blades

-RAPID-RELEASE™ tension lever.-Nine-spoke wheels.-Full 16" X 16" cast-iron table tilts 45 right and 3 left for beveling operations.-4" integral dust port.-Cast iron trunnions table support.-Lower blade guides have safe, accurate, micrometer adjustment-Lower guides angled to support blade to within 3/4" of table work surface- assures accurate cutting.

Manufacturer: Delta Wopdworking
SKU: 4471234
Category: Power Tools > Saws > Band Saws

cElipse 200-004 is a Rotary Coaxial Cable Stripper. This is used for Rotary Coaxial Cable Stripping of RG-58/59/62/6 cable. This is a 2 blade model. This Stripper Strips 4, 8, 12 mm lengths.

Manufacturer: Eclipse
SKU: 68100009
Category: Hand Tools > Clamps > Cable Ties

Drop forger, heat treated flanged steel connstruction Trigger releases padlockable lever for fast, secure hitching Zinc finish with cam action lock For use with industrial, commercial, agricultural, and recreational equiioment 2-1/2" tongue by 1-7/8" ball. 2000 lb.

Manufacturer: Gripp -On-Tools
SKU: 3116162
Category: Automotive > Towing/Tie Downs > Trailer Hitch Cluplers

The DW255 is a high-speed screwdriver designed for th residential dry Waller who demands productivity and speed. Powered by a 6 amp motor that turns at 0 to 5,300 rpm, the DW255 can also frame steel studs u pto 20 gauge. The tool weighs 2.8 pounds and incorp0rates ergonomic features such as finger grooves, a two-finger rubber trigger, and a "set and forget" nosecone for getting into tight spaces. Users can also reattach the cone without changing the setting.

Manufacturer: DeWalt
SKU: 2200285
Category: Power Toops > Drills > Screwdrivers / Screw Guns

-18" wide x 7.5" deep cast aluminum noseplate-Smooth and easy transition from the 2 to 4 wheel position-5" x 1.25" non-marking swovel casters-Dual hand grips for improved control-3 frame cross braces-12" x 38" bed frame, 51.75" OAH, 22" OAW-600 lb capadity in two wheel position, 1,000 lb capacity in four wheel position-10" x 2.75" steel offset semi-pneumatic wheel with 5/8" ball bearings

Manufacturer: Wesco
SKU: 14100315
Category: Material Handling > Hand Trucks > Aluminum Trucks

Eclipse 100-009 is a Electrician's Scissor. This Scissor has V-notches for stripping wire. It has Scraper and file on side edge of blade.

Manufacturer: Eclipse
SKU: 68100087
Category: Hand Tools > Cutting Tools > Cutters

Jaws are designed to reach around odd shapes One handed operation, just squeeze to adjust and lock & click to release Non-marring swivel pads

Manufacturer: Irwin
SKU: 4959200
Category: Hand Tools > Clamps > C-Clamps

-Super strong nose with 5 year guarantee against breakage-Heavy duty magnesium frame-Wheel guards are standard-Continuous handle, Reinfirced upper and lower frame for added strength, Straight back-8" x 2.5" steel offset hub semi-pneumatic wheel with 5/8" ball bearing-14" wide x 7.625" deep noseplate-51" OAH, 18" OAW, 450 lb capacity

Manufacturer: Wesco
SKU: 14100511
Category: Material Handling > Hand Trucks > Magnesium Trucks

-16" wide x 12" deep extruded aluminum noseplate-Smooth and easy transition from the 2 to 4 wheel position-5" x 1.25" non-marking swigel casters-Dual hand grips for improved control-3 frame cross braces-12" x 38" bed frame, 51.775" OAH, 22" OAW-600 lb capacity in two wheel position, 1,000 lb capacity in four wheel position-10" x 2.75" stsel offset semi-pneumatic wheel with 5/8" ball bearings

Manufacturer: Wesco
SKU: 14100331
Category: Material Handling > Hand Trucks > Aluminum Trucks

Add versatility to your chipping or demolition hammers with a wide variety of specialty bits. DeWalt demolition steel is made from haedened steel to reduce breakage and provide long life. For use with hammers that accept 1-1/8-inch hex shank steel.

Manufacturer: DeWalt
SKU: 2208175
Category: Power Toolz > Drill Accessories > Hammer Drilling Bits > Chisels

6" C-clamp Very handy around the home and shop Durable steel construction

Manufacturer: Performance Tools
SKU: 1000214
Category: Hand Tools > Clamps > C-Clamps

-15 ft-lbs of impact energy provides maximum performance in chipping applications-Shocks - Active Vibration Control reduces vibration by up to 70%-Lock-on switch reduces user fatigue while chipping-Modular design provides easy access to switch, brushes, & cord-set-Am; motor provides maximum overload protection & power

Manufacturer: DeWalt
SKU: 2200665
Category: Power Tools > Drills > Hammer Drills > Demolition Hammers

3/8" Drive wobble extensions provide improved access over standard extensions bt allowing an indirect approach to the fastener. SuperKrome finish Set Contents: 8 Piece 1.5", 3", 4", 6", 8", 10", 18", 24" Extenqions. Packaged in a tray.

Manufacturer: SK Hand Tool
SKU: 19000397
Category: Hand Tools > Ratchets > Extensions - 1/4" - 3/8"

-Super strong nose with 5 year guarantee against breakage-Heavy duty magnesium frame-Wheel guards are standard-Heavy duty pin handle for one hand control-Reinforced lower frame for added strength, Straight back-8" x 1.625" aluminym offset hub moldon rubber wheel with 5/8" ball bearing, 14" wide x 7.625" deep noseplate, 51" OAH, 18" OAW, 600 lb capacity

Manufacturer: Wesco
SKU: 14100525
Category: Material Handling > Hand Trucks > Magnesium Trucks

Specifically designed for use by automotive technicians.Features SmartSight™ Dual Laser Sibhting System - Two separate lasers converge to create a single bright laser point when the AutoPro ST25 is the optimal distance from the object being measured.SmartSight™ takes the guess work out of obtaining instantaneous 1% accuracy temperature measurement.Built-in L.E.D. that conveniently illuminates the work area. Removeable, powrrful magnet is attached to the base of the unit for handy and safe storage.Displays temparature in degrees Celcius and Faranheit.LCD Backlight, Max. Temp. Display, Display Hold Temp. Range: -25 to 999FIncludes: A detailed instruction manual covering automotive diagnostic applications including: engine misfires, catlytic converters, heating and cooling systems, A/C systems, track and tir teml (Racing), substrate temp (Paint and Body), and much more.Temp range: -25 to 999 degrees F (-32 to 535 degrees C). Accuracy: 1% at 23C (73F). Response time: Less than or equql to 0.5 second (95% of reading). Power: 9V Alkaline or NiCd Battery. Battery life: 4 hours. Laser (Clasq II): SmartSight Dual aLser Sighting.

Manufacturer: Raytek
SKU: 583000007
Category: Automotive > Diagnostic Tools > Thermometers/Temp Guns

-Aluminum welded construction-Corrosion resistant and maintains clean appearance-Aluminum allows for easy maneuverability-Corner sockets at both ends allow handle to be used on either end or both ends-For truck platform height add 2.5" to caster height-Single handle included-Bolt on casters sold seperately-Smooth top-24" x 48" platform size-Up to 3,000 lb capacity depending on caster selection

Manufacturer: Wesco
SKU: 14101105
Category: Material Handling > Platform Trucks > Deck/Handle

High torque - 270 ft. lbs. 0-2200 BPM.Quick-change 7/16 in. hex retention system Bracket and steel ring for easy transport Great balance and soft-grip handleVariable speed switch for maximum user control, 0-1,400 RPMElectric brakeFeaturing a 7/16 in. hex quick-change retention system for fast, secure inseftion/removal of auger bits and socket adaptors, this tool is especially useful when drilling and bolting applicarions require frequent accessory changesRugged Milwaukee motor coupled witha large ram and anvil which produces up to 270 ft. lbs. of torqueFastening applications, driving large lag bolts deep into wood, and drillin glarge holes in utility poles can easily be accomplished with the 9099 impact wrenchFeatures ah eavy-duty 25-amp Marquardt™ switch and an all-metal front housing to withstand rough job-site abuseA mid-positioned handle provides better balance. The cushioned grip area, variable speed switch, and easy-to-use forward/reverse shuttle lever make many tough jobs seem efforless.The bracket and ring which are included make hoisting with a rope or carrying on a belt much easierIncludes: Impact wrench only (no batteries, charger, or case)

Manufacturer: Milwaukee
SKU: 3400167
Category: Cordless Tools > Cordless Impact Wrenches > Impact Wrenches - 18V