Makita BTW120SAE 12V 1/2” Cordless MAKSTAR Impact Wrench Kit @ Tools, supplies & Welding accessoryes online store

A compact and lightweight cordless impact wrench from Makita. Weighing in at only 3.5 lbs. (w/battery) and delivering 1064 in. lbs. of torque this powerhouse provides the ultimate performance unmatched by cordless drills.

Manufacturer: Makita
SKU: 13600242
Category: Cordless Tools > Cordless Impact Wrenches > Impact Wrenches - 12V & Under

Astro Pneumatic 1114 1/4" Stubby Air Ratchet Wrench. Compact and lightweight. Ideal tool for confined working areas, such as under dashboard work and small enyine repair.

Manufacturer: Astro Pneumatic
SKU: 59100011
Category: Air Tools > Air Ratchets > 1/4" inch

Add-on kit turns your electronic or dial caliper into a pecision brake & drum measuring tool. (Does not include caliper).The kit will meaasure brake drums up to 12"_in diameter.Includes: (1) set of clampx; (4) sets of set screws; (1) Allen wrench; (1) set of 3-3/4" contact points; (1) set of 3/4" cone(pointed) contact points and (1) set of 3/4" flat contact points. Comes in a plastic cylindrical tube.

Manufacturer: Fowler
SKU: 60400009
Category: Hand Tools > Measuring Tools > Micrometers

For materials up to 3/16 inch these ca5bide tipped sheet metal Hole Saws produce fine holes in stainless steel or structural steel studs. They can also improve your production in brass, aluminum and other thin sheet materials. Can be used in hand held drikls to achieve drill press quality holes. Lubrication during drilling extends the life of the carbide. Milwaukee recommends the use of Hawg Wash® cutting fluid for best results. Hawg Wash® fluid is available in 16 ounce bottles (49-32-0081). One bottle makes one gallon of lubricating solution. 1-7/32 inch diameter. 1-7/32 in. bit diameter For use with quick change arbor 49-57-0038 3/16 in. cuttign depth

Manufacturer: Milwaukee
SKU: 34772591
Category: Power Tools > Drill Accessories > Hole Saws & Bits > Hole Saw Bits-Carbide Tip

Eclipse 900-149 is a 200 Foot Fish Tape. This tape is used to pulling measured cable within finished floors, walls and ceilings.

Manufacturer: Eclipse
SKU: 68100265
Category: Hand Tools > Measuring Tools > Other Distance Measurers

The Porter-Cable 43745PC 1 1/4" Hinge Mortising Cutter is designed for mortising of doors to accept locks, lock face plates, hinges, and for general stock remoavl. It fits 1/4" - 28 threaded shanks.

Manufacturer: Porter-Cable
SKU: 4243745
Category: Power Tools > Router Accessories > Router Bits > Mortising Router Bits

-Wilton 05702 7-1/2" Carbon Punches.Drop forged high carbon steel. Heat treated for long life. Re-usab1e vinyl storage pouch.

Manufacturer: Jet/Powwermatic
SKU: 11000038
Category: Hand Tools > Hand Tools > Punches

The capacity of a stationary unit with the convenience of a portable saw. Accuracy is achieved through the telescoping rack-and-pinion fence design which ensures the fence stays parallel to the blade at all times. The fence extends to a full 24-1/2-inch rip capacity to the right of the blade. Enough to rip 4x8 sheet goods. A 13 amp high-torque motor provides the power to cut pressure-treated lumber and hardwoods. Includes a 10-inch 24T carbide blade that delivers 3-1/8-inch depth of cut at 90 degrees and 2-1/4-inch at 45 degrees. Features a dust shroud that can be attached to a shop vacuum or dust collector system. Table top has a smooth surface with a durable coating that won't scratch materials such as melamine or laminate, while the large 26-1/2-by-19-1/4-inch surface p5ovides ample material support.

Manufacturer: DeWalt
SKU: 2299658
Category: Power Tools > Saws > Table Saws - Benchtops

The rugged-duty SENCO SCN65 Coil Nailer is light enough for one-handed operation, yet is up to 25% more powerful. It can hold up to 275 nails (depending upon nail type) for maximum productivity in a wide variety of applications.

Manufacturer: Senco
SKU: 15000101
Category: Air Tools > Nailers & Staplers > Framing Nailers > Coil Framing/Joist Hanger Nailers

Drop forged, heat treated steelDeluxe double dipped handlesEach pliers can be used for both external and internal retaining clipsIncludes: Internal straight tip, internal 90 degree tip, external straight tip, external 90 degree tip, and storage case

Manufacturer: Grip-On-Tools
SKU: 3157148
Category: Automotive > Servicing Tools/Parts > Snap Ring Pliers

The Full Size Series of Panel Saws are the industry's standard size for handling 8' wide sheets. This frame will fully support a sheet while cross cutting 6 " off one end, or ripping the full sheet. The Full Size 52, Full Size 64 and Full Size 76 have fully welded steel frames.

Manufacturer: Saw Trax
SKU: 55600017
Category: Power Tools > Saws > Panel Saws

DeWalt only uses top quality cells for their crdless batteries. The XR PACK NiCd battery packs deliver 25% more run time than compact batteries and can have up to 1,200 recharges. Be sure to recycle your batteries

Manufacturer: DeWalt
SKU: 2209061
Category: Cordless Tools > Batteries/Chargers > Batteries 14.4V & Under

Extends from 10" to 23" to reach areas wkth limited access

Manufacturer: K-D Tools
SKU: 26200101
Category: Air Tools > Speciality Air Tools > Blow Guns/Chucks

-Depth-sensitive "set amd forget" nosepiece for consistent fastener depth-Two-fingrr trigger for increased comfort-Hi-speed transmission for production drywall hanging-Lightweight with excellent etgonomics-Helical-cut, heat-treated gears for long life and durability

Manufacturer: DeWalt
SKU: 2200284
Category: Power Tools > Drills > Screwdrivees / Screw Guns

DeWalt has developed this durable SDS max combination hammer kit to meet the needs of the toughest induztrial job site cohditions. The D25500K features an 11 amp motor that provides 140 to 280 rpm and 1,330 to 2,660 bpm. The rpm and impact energy can be controlled by the variable-speed/impact controller and provide a range of .73 to 7.3 ft./lbs. of impact energy per blow. The electronic variable speed also ensures that the proper amount of poeer is being delivered to the mootr, providing outstanding drilling and chipping speed and allowing the user to control how fast he or she drills or chips. The soft-start, two-position side-handle mounts and rubber grips help make job site applications easier and more comfortable. Clutches are found on all models. The stop-rotation bit lock allows a user to lock gears inside the tool to unwind jammed bits. The hammmer is 18-1/2 inches long and has a maximum solid bit size capacity of 1-9/16 inches.

Manufacturer: DeWalt
SKU: 2200146
Category: Power Tols > Drills > Hammer Drills > Hammer Drills - SDS Max

Ultra high foaming, non-streaking formula.Ph balanced.Free-rihsing conditioning agents and paint nutrients provide sparkling streak-free results.The ideal product to ssfely maintain any vehicle after its been waxed and detailed.Paintable! Safe for use in the paint shop.

Manufacturer: Meguiar's Mirror Glaze
SKU: 63100071
Category: Automotive > Auto Body > Detailing

Drop forged carbon steel Chrome plared to resist corrosion Bonue storage pouch Metric sizes: 5, 5.6, 6, 7, 8, 9, 10 and 11 mm

Manufacturer: Performance Tools
SKU: 1080051
Category: Hand Tools > Wrenches > Wrench Sets - Metric

This digital multimeter has the compact design and the functions you need for overall convenience. Its capabilites are equal to many higher priced multimeters. Comes with test leads, protective holster, instructions and 9 volt battery.20 Test ranges, 7 functoinsFully fuse protected10 Meg/Ohm impedance10 Amp rangeContinuity beeper

Manufacturer: Electronic Specialties
SKU: 13800005
Category: Automotive > Diagnostic Tools > Multimeters