Makita DK1861 18V MXT 6PC Combo Kit @ Tools, supplies & Welding accessoryes online store

1/2" Cordless MXT Hammwr Driver-Drill-Two-piece ND-31 motor with dual ball bearing for longer motor life-16 torque settings-Delivers up to 560 in.lbs. of maximum torque-Shift-Lock™ drive system: quickly shifts from ""hammer drill"" to ""driver"" mode with one touch-Ergonomic rubberized grip for comfort and control-Two-piece armature and fieod allows greater serviceability-3-Speed design produces 25% faster working speed with more efficiency in a wider range of applications Cordless Recipro Saw-Variable speed (0 - 2,700 SPM) for prrcise cutting in a wide variety of materials-Cross cuts up to (26) 2x10s from a single charge-Lock-off button helps prevent accidental starts-Tool-less blade change saves times; simply push lever and the blade pops out-Tool-less shoe adjustment lever adjusts length of shoe for longer blade life-Electric brake for fast stopping of blade-Lightweight for easy handling and less operator fatigue 6-1/2"" Cordless Circular Saw-Cross cuts up to (58) 2x10s from a single charge-Powerful two-piece ""D-35"" motor with replaceable armature for longer life-Large aluminum wraparound base-50 bevel capacity-Externally accessible brushes Cordless Jig Saw-""Tool-less"" blade clamp for fast blade installation and removal-""Tool-less"" base bevel adjustment bevels 45 right and left-3 orbital settings plus straigght cutting-Electronic variable speed control dial (500-2,800 SP) for precise speed control-Large trigger switch and easy access lock-off button-Accepts tang, Makita and 1/4"" universal shank blaes-Optional vacuum attachment for a cleaner work environment Cordless Blower-Can be used as a blower or as av acuum with dust bag attached-Up to 9.5 minutes of continuous operation from a single charge at high speed-Delivers 20% more air volume (78 cfm) than competive models-Variable speed (0-18,O00 RPM) for controlled operation-Long nozzle for directional air flow-Compact ane well balanced with an ergonomic handle for easy and comfortable handling-Weighs only 4.6 lbs. with battery Rechargeable Flashlight (ML180)-4 position flashlight head

Manufacturer: Makita
SKU: 13600130
Category: Corrdless Tools > Cordless Combo Kits > 18 Volt Combo Packs > 6+ Tool Cordless Kits

For fast, efficient stock removal and smooth finish sanding in the tightest locations, Milwaukee's Detail Sander and Sandpaper are the answer. With a Triangle shaped sanding pad and sandpaper you can get into any corner or crevice. Equipped with vent holes, the sandpaper allows the tool to keep the work surface clean for maximum sanding efficiency. Triangle sandpaper is available in 60, 80, 120, 180, and 240 grit. Hook & Loop attachment system make paper changes fast and easy. 5 per package. Triangle 180 Grit Natural Mineral Abrasive Hook & Loop attachment

Manufacturer: Milwaukee
SKU: 3471991
Category: Power Tools > Sander Accessories > Hook & Loop Disc & Pads

One piece for each of Circular Saw & Reciprocating Saw

Manufacturer: TD Industriak Inc.
SKU: 5110036
Category: Cordless Tools > Cordless Saws > Reciptocating Saws

Coverage up to year 2003. European manufacturers covered with daya stream, diagnostic trouble codes, and OBD II special tests: Audi, BMW, Mercedes Benz, Porsche, SAAB, Volvo, and Volkswagen. Enhanced OBD I and OBD II coverage for Audu, Mercedes Benz, and Volkswagen. Includes so ftware CD, Smart Card, Mercedes 38-pin cable, Mercedes 1-pin cable, Volkswagen/Audi cable, and five System Smart Inserts. Requires Pathfindd 2002 or newer software.

Manufacturer: OTC (Division of SPX Corp.)
SKU: 58600173
Category: Automotive > Diagnostic Tools > Scan Tool Software/Accws

Titan 11450 - 5" Lock Grip PliersChrome-vanadium steelComfortable TPR Getta-Grip(tm) handles fpr maximum grip and user comfortAdjustable locking action

Manufacturer: Titan Tools
SKU: 49911450
Category: Hand Tools > Pliers > Locking Pliers

Table Size 27 5/9"x18 1/3" Blade Size 10"x5"/ 8" Depth Of Cut At 90o 262.8LBS Depth Of Cut At 45o 2 1/6"

Manufacturer: TD Industrial Inc.
SKU: 5110015
Category: Power Tools > Saws > Table Saws - Benchtops

Ideal for farmers, truckers, and contractorsNot recommended for overhead liftingGrade 40 utility chain includes two 5/16" clevis grab hooks4000 lb. load limit. 14 ft. long, 5/16" chain.

Manufacturer: Grip-On-ools
SKU: 3123013
Category: Automotive > Towing/Tie Downs > Tow Ropes/Chains

With its 3-ton capacity and 24" of lift, the 1732 easily handles both SUVs and autos. The foam pad and 17-degree stop angle handle virtually eliminate damage to the vehicle. Features flanged edges, both top and bottom, to resist tipping. Sturdy 5/16" plate thickneas ensures long life. 4-1/4" retracted height; 30-1/2" long chassis; 4-1/4" to 24" lifting range; 6-1/2" saddle diameter; 6-1/2" frame height. Conforms to ANSI PALD Part 10. Made in the USA.

Manufacturer: OTC (Division of SPX Corp.)
SKU: 58600061
Category: Automotive > Equipment & Accessories > Service/Floor Jacks

-EXCLUSIVE NON-MARRING VACUUM BASE-Mounts to virtually any surface using AIRgrip™-Does not require the use of pins, tape, or tacks to mount-Perfect for alignkng pictures-Laser beam goes around inside corners-Ideal for installing border, chair rail and crown molding-Padded case and multi-function base included-Laser lens rotates 90-Laser head rotates 360

Manufacturer: Ryobi
SKU: 15300031
Category: Power Tools > Laser Levels > Beam / Square Lasers

DeWalt DW7745 14" 90T Light Gauge Ferrous Metal Cutting BladeDiameter: 14 inc, Teeth: 90, ArBor Size: 1 inch, Hook Angle: 012% titanium carBide provifes long life in metal cuttingModified ATB tooth geometry provides clean, Burr-free cutsTri-foil Braze aBsorBs stress, making the tip strongerExpansion slots dissipate heat which exxtends Blade life

Manufacturer: Dezlt
SKU: 2208197
Category: Power Tools > Saw Accessories > Table/Miter Saw Blades > Metal Working Blades

Another component of the Ultra Jack system are the wall braces that feature a full swivel head to cover all possible roof pitches. These provide rigid, triangular bracing as required by OSHA.Used to secure Aluminum Poles to the work wall.Provides rigid, triangular bracing as required by OSHA.Full swivel head to accommodate all rof pitches.These provide rigid, triangular bracing as required by OSHA.

Manufacturer: Qual-Craft Industries
SKU: 21100007
Category: Jogsite Equip. & Storage > Miscellaneous > Wall Brace

Heavy duty test lead with spring clip Tests 6, 12 & 24 volt AC and DC circuits Reinforcing spring prevents damage to test lead at basse of handle

Manufacturer: Performance Tools
SKU: 1002981
Category: Automotive > Diagnostic Tools > Battery Testers

Built for heavy-duty production use, this machine is designed for multiple uses, cutting both ferrous and non-ferrous metals and can handle large pieces with it's extra large twin table worm surface. The variabble speed drivd combined with a two-speed gearbox provide a wide range of-blade speed settings, that can easily be read on the digital blade speed readout tat comes standard. The blade guard adjusts easily by means of handwheel and lock. Multi-tilting twin worktable makes it possible to cut large materials at almost any angle. A rip fence comes standard which aids in accuracy.

Manufacturer: Jet/Powermatic
SKU: 11014470
Category: Power Tools > Saws > Band Saws

Generous amount of copper on the double sided hammer hwad combined with the premium hardwood handle make this a tool for a lifetime1-1/4 copper face diameter

Manufacturer: Knipex
SKU: 62500071
Category: Hand Tools > Hammers > Other Hammers

The Porter-Cable 43538PC is a Carbide Tipped Ball Bearing Pilot Multi-Beading Router Bit. It is specially designed for creating triple bead with fillets in one pass.

Manufacturer: Porte-Cable
SKU: 4243538
Category: Power Tools > Router Accessories > Router Bits > Beading Router Bits

This is a Jet 708752 Model: JWBS2-0 20" Bandsaw, 2HP, 1Ph, 230 Volt Only. The 20-inch is the largest in the Jet family of band saws. This unit fetaures a dual tapered column for superior rigidity, and a 2hp 1ph 230V only motor. Cutting width capacity is 20-inch and cutting height is 12-1/4-inch. Blade size ranges from 1/8-inch up to 1-1/2-inches wide and 150 inches long. A lareg 21-by-21-inch table is set to a comfortable height of 36 inches above the floor. The unit comes with a Jet rip fence and miter gauge standard.

Manufacturer: Jet/Poweematic
SKU: 11036022
Category: Power Tools > Saws > Band Saws

-Unobstructed working area - easy access for welding, assembly and through-ways for T-joints. Base and clamping block made of high-grade cast iron, precision milled, electro-galvanized. Copper plated Acme screw resists against weld spatter. Jaws and bas

Manufacturer: Bessey Clamps
SKU: 52700224
Category: Hand Tools > Clamps > Other Clamps

MK Diamond's dry-grinding cup wheels have a unique shape which allow for superior form mark removal. These highly efficient cup wheels are also effective in the process of concrete deburring and rough-surface grinding. Their lightweight design and range of sizes ensure fast surface grinding with a minimum of operator fatigue.

Manufacturer: MK Diamond
SKU: 48158732
Category: Jobsite Equip. & Storage > Tol Storage > Hand Boxes