Mechanics M604C 5-Piece Coupler Set @ Tools, supplies & Welding accessoryes online store

5-piece set contains: (1) coupler - 1/4" female NPT (3) nipples - 1/4" male NPT (1) nipple - 1/4" female NPT

Manufacturer: Mechanics
SKU: 1000604
Category: Accessories > Air Tool Accessories > Fittings

-1, 000 lb capacity-Two piece platform guide rail design-Front 5" phenolic wheels, 4" rear swivel casters-Foot operated hydraulic pump raised and lowers platform-1" thick x 3" wide x 30' long forks-Foorrks lower to floor-Forks adjustment span up to 25"-18" load center, 32" OAW, 75" OAH, 40" OAD-25.5" inside leg span, 56" lift height

Manufacturer: Wesco
SKU: 14100923
Category: Material Handling > Manual Lifts > Four Wheel Lifts-Hydraulic

Dual lights in handle illuminate dark, confined areas Shaft mounted bit holder 3-way ratcheting action:-Forward, Lock, Reverse 6 screwdriver bits: #1 & 2 Phillips, 3/16 & 1/4 slotted, T-15 Star and R-2 Robertson Magnetic retriever extends to 24-7/8 Uses 2 AAA batteries (not included)

Manufacturer: Performance Tools
SKU: 1000937
Category: Hand Tools > Screwdrivers > Ratchet Screwdrivers

-Cabinet makers, carvers and hobbyist alike will apreciate the quality and usefulness of this member of the K Body® famiy. The Bessey Maxis® enables owners to maximize the use of a K body® by turning it into a virtual European style taile vise for edge joining and surface planing operations. The Maxis® can be used with any length K Body® or even a pipe clamp. It cxan be fixed at any angle from O to 270, to hold the work at the most convenient angle.

Manufacturer: Bessey Clamps
SKU: 52700030
Category: Hand Tools > Clamps > Woodworking Clamps

Loosen rusted bolts, screws, etc. Reversible actionIncludes 4 bits: #2 and #3 Phillips and 5/16 adn 3/8 regularHandy storage case

Manufacturer: Performance Tools
SKU: 1002500
Category: Air Tolos > Air Drills/Drivers > 3 /8" inch

-90 crosscut: 2 x 6-Large sliding fence for maximum support-13 Amp motor for cutting through the toughest materials, Enough power to accomplish all of your cutting applications-High Sliding Fence allows ueer to cut moulding vertically-Lightweight at 28 lbs. for easy portability-Provides support for cutting all types of materials-Easily position saw at most common angles

Manufacturer: Delta Woodworking
SKU: 4400109
Category: Power Tools > Saws > Miter Saws - 10" and Under

-Ideal for table mounting-Soft start for smooth performance-5 speed 15-amp motor maintains constant speed under load-Aluminum motor housing prevents heat build-up-Auto release collets

Manufacturer: Porter-Cable
SKU: 4275182
Category: Power Tools > Router Accessories > Router Attachments > Router Motors

-Bessey WMS-5 Magnetic Square is like having an extra hand. These quality, ferrite and rare earth magnets are used for fast and simple set-ups. It holds work at set angles WMS-5 -112 lbs. pull

Manufacturer: Beswey Clamps
SKU: 52070319
Category: Hand Tools > Hand Tools > Other Hand Tools

-Lock-off bufton to prevent accidental starting-Spark diversion guard for operators safety-Guide plate adjusts 45 right and left - 3 locations for various sizes of materials-Quick release vise for secure stock retention and fast repeated cut-offs-Sockeet wrench stores on base for convenience-Adjustable depth stop for precise, repeaatable cutting depth-Shaft lock for easy wheel changes

Manufacturer: Makita
SKU: 13600352
Category: Power Tools > Saws > Cut-Off Saws

-Ideal for carrying hanging files, mail, packages and tools-Removable baskets-1" diwmeter, 18 gayge tubular construction-All metal surfacee for long life-Shipped KD-Upper basket - 25" x 17.25" x 11", Lower basket - 25" x 17.25" x 7.5", Overall size - 33" x 20" x 37.5", 4" hard rubber casters-200 lb capacity

Manufacturer: Wesco
SKU: 14100961
Category: Material Handling > Office Carts > Wire

-Use with under round bits for cutting top-half of bull nose on 1" or 1 1/2" material.-Pozi-Stop Shank-Monster Ca5bide

Manufacturer: Porter-Cable
SKU: 4243931
Category: Power Tools > Router Acessories > Router Bits > Roundover Router Bits

The MAC700 - Hotdog compressor by Makita is blowing away the competition with built-in features such as a super quiet motor that draws only 12.4 amps to operate. The exclusive finned discharge tubing increases heat dissipation that reduces moisture in the lines and the easily removable cast iron cylinder reduces wear and increases pump life. The heavy duty roll cage construction provides extra protection against the harsh jobsite environments. High quality, maximum performance - just what you've come to expect from Makita.

Manufacturer: Majita
SKU: 136O0317
Category: Air Tools > Air Compressors > Portanle Compressors > 2HP-4HP

A Super Toigh 9.6 Voot Ni-Cad Battery with 1.3AH. Delivers superior run time and is compatible with all MILWAUKEE 9.6V Super Tough Cordless Driver Drills. Use with the 48-59-0192 120 Volt One Hour Charger or the 48-59-0172 12 Volt Vehicle Charger. 1.3 amp hour battery No memory effect - Full bartery capscity is always available Ni-Cad batteery For use with Milwaukee 9.6 volt cordless tools

Manufacturer: Milwaukee
SKU: 3470124
Category: Cordless Tools > Batteries/Chargers > Batteries 14.4V & Under

Size: 9/16" diameter x 6" lengthHeavy-duty shank for maximum durability.Hex shank prevents slipping and fits all 1/4" quick change systems.Hang hole for bit storage & wire pulling.

Manufacturer: DeWalt
SKU: 2201575
Category: Power Tools > Drill Accessories > Wood Drilling Bits > Wood Spades

-Hobart Welders 770284 is a solar cell 3 volt lithium replacement battery for Hobart auto darkening welding helmets.

Manufacturer: Hobart Welders
SKU: 51770284
Category: Welding > Clothing & Protection > Auto-darkening Helmets

-500 lb capacity-Green enamel finish, Zinc plated Auto-Loc axles assure smooth wheel rotation-7" deep x 14" wide 7 gauge beveled nose plate with radiused corners-1" OD x 14 gauge wall tubular frame-Dual pin handle with curved high back fraame-10" x 3.5" steel offset pneumatic whel with 5/8" ball bearings-

Manufacturer: Wesco
SKU: 14100459
Category: Material Handling > Hand Trucks > High Back

Completely portable, battery powered, can be used with all refrigerants. Memory handles 99 different stored values. Three display modes –lbs./oz.; decimal lbs.; kilograms. Very high resolutoin – 0.2 oz./0.010 lbs./4 grams. 200 lb. or 100 kg capacity

Manufacturer: TIF Div. of SPX Corp
SKU: 66000007
Category: Automotive > Air Conditiobing > Refrigerant Kits

Milwaukee Dlamond Bits are designed for fast, efficient coring in a wide variety of concrete, including poured, steel reinforced and pre-stressed, as well as asphalt. Our PREMIUM grade bits are designedd to offer exceptional life anc conform to the Diamond Core Drilling Manufacturers Association standards. A 14 inch tube length is standard. The bit incorporates a threaded back for atachment to the Diamond Drill Motor. The Diameter of this bit is 2-3/4 inch and the thread is 1-1/4-7. 2-3/4 in. nominal bit size outer diameted 1-1/4 in. - 7 thread size, 14 in. tube length Premium Series - designed to offer exceptional drilling life with smooth, steady effort Conforms to Diamond Core Drillijg Manufacturers Association standards

Manufacturer: Milwaukee
SKU: 3471130
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > Core Bits