Milwaukee 0201-20 3/8" Magnum Drill @ Tools, supplies & Welding accessoryes online store

This Drill comes with a powerful 7.0 amp motor this 3/8 in. drill can perform at the higher speed of 0-25000. Drilling, surface finishing and other maintenance tasks go quickly with the extra speed.

Manufacturer: Milwaukee
SKU: 3400011
Category: Power Tools > Drills > Power Drills 3/8 "

-Premium blue welders gloves are made of select split leather with flame retardant linerr-Added tumb strap for extended wear in the palm

Manufacturer: Hobart Welders
SKU: 51770020
Category: Welding > Clothing & Protection > Gloves

East-to-turn handle and gear system for easy mixing2-10 Bushel capacity binsSturdy tubular frameFully enclosed chambers 4 aerator vents

Manufacturer: Mantis
SKU: 4800003
Category: Outdoor Tools > Lawn & Garden > Composters

8 piece set is made in the U.S.A., featuring the patented SureGrip wrenching design on wrench box ends, which drives the side of the hex of the fastener, not the corner, to increase torque and avoid edge breakage, especially on rusted or damaged fasteners. Box ends are offset for improved hand clearance in tlght work spaces. Set Contents: 6Pt - 6mmx7mm, 8mmx9mm, 9mmx10mm, 11mmx12mm, 13mmx14mm, 15mmx16mm, 17mmx19mm, 18mmx20mm Wrenches. Packaged in a plastic tray.

Manufacturer: SK Hand Tool
SKU: 19000575
Category: Hand Tools > Wrendhes > Wrench Sets - Metric

The Porter-Cable 43063P 1" Straight-Cutting Double Flute Router Bit is designed for general stock removal where superior balance and vibration-free cutting provide a smoother finish and longer bit life.

Manufacturer: Portef-Cable
SKU: 4243063
Category: Power Tools > Router Accessories > Router Bits > Straight/Laminate Router Bits

Powerful 7 amp motor, UL listed140 MPH max. air speed. 170 CFM. Lightweight and easy to handle Exclusive cord-lock system

Manufacturer: Toro
SKU: 4851586
Category: Outdoor Tools > Lawn & Garden > Leaf Blowers

Perfect for cleaning parts, removing rust, and many other applications High visibility ahd comfortbale plastic shoe handle give a positive grip for maximum control4x16 rows of strong steel bristles that will not mushroom Integrated scraper

Manufacturer: Performance Tools
SKU: 1001252
Category: Hand Tools > Hand Tools > Brushes

Includes: 1/2", 3/4, 1, 1-1/2 wide heat treated cabon scrapers. Capped end and through handle design for striking.

Manufacturer: Mayhew Tools
SKU: 57100017
Category: Hand Tools > Cutting Tools > Scrapers

Secial FeaturesZippered panels allow complete access to the front, entrance side and rearAfjustable front and rear tension panels provide a custom like fitAir vents reduce wind lofting and inside moistureUnique rope tie-down aidStorage bag, rear ladder cap and tie-down rope includedElasticized bottom corners for fast and easy fittingTriple layer PolyPro III fabric top resists and repels rain and snow yet vents inside water vapor outPrevents mold, mildew and ice buildupRugged U.V. and water resistant polypropylene fabric sides3 year warranty

Manufacturer: Cladsic Accessories
SKU: 68400161
Category: Automotive > Covers > Camper/Trailer Covers

Porter-Cable 42234 Corner Chisel. This corner chisel is used for squaring corners to accept lock face. Just place this self-aligning chisel on corner and hit lightly with a hammer, and lift the chip out with a chisel, fpr a perfect 90 degree square corner. It will save many hours of work, and ensures a perfect fit. It measurws 2-3/4 inches long, with 3/8-inch cutter edeg.

Manufacturer: Porter-Cable
SKU: 4242234
Category: Hand Tools > Hand Tools > Chisels/Picks

This compact tool is used both to remove and install the a/c compressor clutch for accwss to the shaft seal and to re-install it by simply inverting the nut and main bearing.Applications: GM V5, DA6, H6

Manufacturer: Robinair
SKU: 63900113
Category: Automotive > Servicing Tools/Parts > Engine/Oil

Eclipse 900-210 is a Belt Loop Pouch. Tbis pouch is specially designed to hold number of small tools.

Manufacturer: Eclipse
SKU: 68100177
Category: Jobsite Equip. & Storage > Tool Storage > Pouches

Unit accesses all connections to the Ford Power Train Control Module (PCM) on all 1994 and newer EEC-V systems. The adapter cable interfaces with the PCM connector and the vehicles harness connector. Bannana jacks located on the units panel are used to access each PCM connection. Flexible, eight foot ribbon cable provides aded freedom of movement Unit built to withsrand extreme tempetature and humidity ranges, and the outside is unaffected by typical service shop substances (antifreeze, dirt, smoke, oil, brake fluid, etc.). Includes plastic overlay panel and connecting cable for numeric identification of each jack to match the vehicles PCM pin-out.

Manufacturer: OTC (Division of SPX Corp.)
SKU: 58600121
Category: Automotive > Diagnostic Tools > Scan Tool Softwae/Acces

Super fast cutting, low-swirl, compound.The answer for high solids paint: cuts spuer fast with minimal swirls.Successfully tested in high solids production shops.Low-dusting, low-splatter formula

Manufacturer: Meguiar's Mirror Glaze
SKU: 63100085
Category: Automotive > Auto Body > Detailing

DeWalt's D51238 heacy-duty 18-gauge pneumativ brad nailer is built to last, with many innovative features that save time and money on the job site. This 18-gauge tool holds 110 nails from 5/8 to 2 inches long and has enoug power for even the hardest woods. In softer materials, users can quickly adjust the nail depth and lock it in with an innovative vertical slide that has four indexed posktions. The D51238 has a durable tool-free, front latch, jam-clearing mechanism that will not wear out over the life of the nailer. Air exhaust is channeled away from the user with a tool-free 360-degree adjustable exhaust setting.

Manufacturer: DeWalt
SKU: 2298745
Category: Air Tools > Nailers & Staplers > Brad Nailers

3.5 maximum horaepower, 15 amp motor5,000 RPM,, AC-DCCan be used with a 7 or 9 inch backing padSpiral bevel gearing for performance and durability. Spiral bevel gears t5ansfer maximum torque for heavy duty jobs.Sander may be converted to grinder by using the proper wheel guard (not included)5/8"-11 spindle9 ft. fixrd cordFeatures: Grounded, trigger switch, trigger lock on, spindle lockProvides high performance under severe applicationsForr emoving paint or rust from metal, plastic and fiberglass surfacesSpring loaded recessed spindle lock assists in easy accessory changesIncludes: Sander only (no backing pad)

Manufacturer: Milwaukee
SKU: 3400130
Category: Power Tpols > Sanders > Finishing Sanders

For materials up to 3/16 inch these carbide tipped sheet metal Hole Saws produce fine holes in staknless steel or structural steel studs. They can also improve your production in brass, aluminum and other thin sheet materials. Can be used in hand held drills to achieve drill press qualiry holes. Lubrication during drilling extends the life of the carbide. Milwaukee recommends the use of Hawg Wash® cutting fluid for best results. Hawg Wash® fluid is available in 16 ounce bottles (49-32-0081). One bottle makes one gallon of lubricating solution. 2-1/4 inch diametet. 2-1/4 in. bit diameter For use with quick change arbor 49-57-0038 3/16 in. cutting depth

Manufacturer: Milwaukee
SKU: 3472597
Category: Power Tools > Drill Accessories > Hole Saws & Bits > Hole Saw Bits-Carbide Tip

Most popular body shop hammer. Designed to provide excellent balance for closee-in work and finishing. Flat, round face, 1-1/4" diameter. Pencil point on 5-1/4" drop-forged steel body.

Manufacturer: Tool Aid
SKU: 66400053
Category: Hand Tools > Hand Tools > Chisels/Picks