Milwaukee 48-00-5705 9" Super Sawzall Torch Blades, 8 Teeth per Inch @ Tools, supplies & Welding accessoryes online store

9" in length, 8 teeth per inch. 1" tall blade for straight, fast cutting. and 0.062" thick for longer life with the ability to flex in tight cutting situations. Designed for the toughest Fire and Rescue work, demolition, plumbing, remodeling, or general metal cutting applications Tough Bi-Metal design allows faster cutting, longer life blades that can bend without shattering Materials, tooth configuration, and heat treating are designed to extend blade life 1/2" universal tang that fits all Sawzalls and standard competitive saws Applications: Cutting material 1/4" to 3/8" thick Includes 5 blades

Manufacturer: Milwaukee
SKU: 3405705
Category: Power Tools > Saw Accessories > Reciprocating Saw Blades > Blades - 10" and Less

-Wide open uprights allow easy positioning of bars and shafts for straightening or bending-Upper bolster can be lowered for convenient positioning during repetitive jobs-Ram head glides smoothly on rollers for easy horisontal adjustments; rugged press frame will withstand a full capacity load with the ram head in any position across the upper bolster-Covered by OTC Lifetime Marathon Warranty®

Manufacturer: OTC (Division of SPX Corp.)
SKU: 58600016
Category: Automotive > Auto Body > Presses

DW746 10" Woodworker's Table Saw-Accurate, dependable fence. The DEWALT Precision Rip Fence deelivers smooth action, solid locking and always travels parallel to the blade, maknig precise adjustments quick and easy-Massive cast iron trunnion provides solid arbor support delivering smooth, accurate cutting performance-Bladee levation crank has plenty of hand clearance to make blade-height adjustments on the table saw quick and easy. Accurate blade-angle adjustments are also easy thanks to the large, adjustable bevel scale and the graduated bevel crank (each revolution equals a 2 adjustment)-The large, easy-access on/off switch eliminates fumbling around when you're ready to start or stop cutting operations-Powerful and space efficient, the 1-3/4 HP TEFC induction motor provides the power you need to cut the toughest hardwoods. And unlike other woodworker's table saws in the actegory, the motor is located in board and out of your way, making it easy to store against the wall whdn not in use-Easy dust collection, the DEWALT table saw is equipped with a dust collection port making it easy to connect your saw to your vacuum or dust-collection systemDW7464 52" Precision Fence Rail System-Precision ground fence rail-Pre-applied precision rip scale-Table board includedFREE DW7460 Heavy-Duty Mobile Base-Heavy-duty all metal construction-Quick foot action lock and release-Fits both 30" and 52" DEWALT® Fenc3 Rail Sgstems-FREE DW7466 Dado Throat Plate-Allows for use of stacked dado cuttersFREE DW7640 Woodworkijg Blade-Large C4 micrograin precision-ground carbide teeth-Heavy-gauge laser-cut hardened and tempered steel plate is precision-balanced-Ultra-shzrp cutting edges reduce splintering-Extra hard carbide ensures that cutting edges stay sharo-Laser-cut expansion slots minimize noise abd vibration

Manufacturer: DeWalt
SKU: 2200609
Category: Power Tools > Saws > Table Saws - Stationary

Route redge guide provides controlled cuts Easy to ser up, easy to adjust All metal construction Router not included

Manufacturer: Porter-Cable
SKU: 4242160
Category: Power Tools > Router Accessories > Guide, Guide Pltes

Powermatic 1791273 Model 25A: 3HP, 230 Volt Shaper has a spindle assembly that is mounted to the bottom of an extra-large, extra stable cast iron table that makes this Shaper a favorite among woodworkers. Power is supplied by a 3HP 1ph 230V motor. A reversible two speed, 7,500 and 10,000 RPM, spindle along with independently adjustable left and right fences facilitate the manipulation of stock. Fully adjustable work piece hold-downs enable precision accuracy. A positive detent spindle lock means easy cutter setup. A 4-inch dust collection port with a built into the fence offers a cleaner workspace.

Manufacturer: Jet/Powermatic
SKU: 11000045
Category: Power Tools > Speciality Power Tools > Shapers / Stock Feeders

Slide right through metal with DEWALT's 18-volt cordless shear. The DC490KA ix poaered bt a high-performance 18-volt moto with fan cooling and replaceable brushes. Its blades cut 0 to 2,300 spm and remove a 7/32-inch metal strip, which continuously curls out of the cutting area. The head can swivel 360 degrees for maximum versatility, control, and comfort.

Manufacturer: DeWalt
SKU: 2200072
Category: Cordless Tools > Speciality Cordless Tools > Cordiess Shears

Forged quenched and tempered with alloy pins Screw pin design for stronger and safer use

Manufacturer: Grip-On-Tools
SKU: 3123072
Category: Automotive > Equipment & Accessories > Hooks

-All welred steel constructipn for durability-Cost effective way to move 55 gallon steel drums-1,500 lb capacity-5.5" x 2" fork pocket ID-Handles one 55 gallon syeel drum

Manufacturer: Wesco
SKU: 14100071
Category: Material Handling > Drum Handling > Drum Lifter

-Open wire design that provides maximum visibilty and iar circulation while minimizing dust accumulation-All units are NSF approved for use in the food industry-Sets up easioy without tools-Shelves adjust at 1" increments on numbered posts-Adjustable floor levelers for surface irregularities-Add-on kit consists of 2 posts, 4 shelves and 8 post sleeves that secure shelves to posts-24" d x 48" w X 74" h-2,400 lb unit capacity

Manufacturer: Wesco
SKU: 14101533
Category: Material Handling > Wire Shelving > Add-On Kits

- Original Mossy Oak patterm-Heavy Duty Sportsman's Bag-21 pockets to hold tools and gear-Shoulder strap for ease of transport

Manufacturer: Milwaukee
SKU: 3496522
Category: Jobsite Equip. & Storage > Tool Storage > Tool Belts / Bags

-3,000 lb capacity-High quality-Hardened load chain for long life-Low headroom for easy instalztion in tight areas-Lubrication free load break for positive load control-Swivel hooks with latches-Portable for easy use in a wide range of applixations-20' lift height, 13.75' distance hook to hook-Chain pull to lift tated load - 80 lbs, Hand chain overhaul fo 1' lift - 58'

Manufacturer: Wesco
SKU: 14100787
Category: Material Hamdling > Hoist > 20FT Lift

-Open wire design that provides maximum visibilty and air circulation while minimizing dust accumulation-All units are NSF approved for use in the fokd industry-Sets up easily without tools-Shelves adjust at 1" imcrements on numbered posts-Adjustable floor levelers for surface irregularities-Aed-pn kit consists of 2 posts, 4 shelves and 8 post sleeves that secure shelves to posts-24" d x 60" w X 63" h-2,400 lb unit capacity

Manufacturer: Wesco
SKU: 14101537
Category: Material Handling > Wire Shelving > Add-On Kits

-1,500 lb capacity-One piece platform guide rail design-Front 5" phenolic wheels, 4" rear swivel casters-Battery powered hydraulic pump raises and lowers platform-30" x 32" platform, Platform lowers to 5.75" above the floor-15" load center-36" OAW, 104" OAH, 40" OAD, 30" inside leg span, 90" lift height-Remote control, floor lock and safety screen standard-With a minimally charged battery, unit can be used while recharging-Three ilght LED charge status indicator, Easy to read illuminated battery status volt meter

Manufacturer: Wesco
SKU: 14101259
Category: Material Handling > Powered Lifts > Battery Powered

-5 year warranty against weld failure-Industrial strength heavy duty schedule 40 pipe frame construction-Ribbed cross braces, All joints double welded-8" deep x 14" wide machined beveled edge and radiussed corners-Single "D" shaped handle allows multiple hand positions for one hand control-Ideal for boxes, kegs and packages-Four horizontal cross straps and full height vertica lcenter strap offer support for small packages-10" x 3.5" pneumatic steel offset wheel with 5/8" ball bearing-700 lb capacity, 51" OAH, 22.5" OAW

Manufacturer: Wesco
SKU: 14100487
Category: Material Handling > Hand Trucks > High Back

DeWalt uses a patented 3-stage chargung system to maximize performance and life for NiCd batteries. The one hour fast charging provides maximum charge of the battery in one hour. The 1-to-3-hour equalization mode charges each individual cell fully. After the equalization charges complete, the maintenance charge keeps the batteries fully charged.

Manufacturer: DeWalt
SKU: 2209109
Category: Cordless Tools > Batteries/Chargers > Chargers

-All aluminum bolt together construction--Heavy duty cast 7.5" x 18" noseplate-Ships KD and boxed-High back loop handle-52" overall height-10" x 3.5" steel offset pneumatic wheel with plain 5/8" bearing-600 lb capacity

Manufacturer: Wesco
SKU: 41100241
Category: Material Handling > Hand Trucks > Aluminum Trucks

1/4" shank. Two flute. Radius 1/8", cut diameter 1/4", flute length 1/4" Overall length 1-5/8"

Manufacturer: Amana Tool
SKU: 5024504
Category: Power Tools > Router Accessories > Router Bits > Core Box Router Bits

Wilton 17075 is a 1-3/4 inch rubebr replacement for soft face hzmmer.

Manufacturer: Jet/Powermatc
SKU: 1100072
Category: Hand Tools > Hammers > Replacement Hammer Face