Milwaukee 48-03-0008 Quick Change Chuck 5/8-16 @ Tools, supplies & Welding accessoryes online store

Converts 3 jaw chuck into a 7/16 in. quick change chuck 5/8 in. - 16 thread Allows rapid,, keyless insertion and removal of 7/16 in. hex drive accessories

Manufacturer: Milwaukee
SKU: 3470071
Category: Power Tools > Drill Accessories > Drill Attachments > Drill Chucks & Arbors

-500 lb capacity-Green enamel finish-Zinc plated Auto-Loc axles assure smooth wheel rotation-7" deep x 14" wide 7 gauge beveled nose plate with radiused corners-1" OD x 14 gauge walk tubular frame-Pin handle with curved back design-8" x 1.625" aluminum center moldonr ubber wheel with 5/8" ball beafing

Manufacturer: Wesco
SKU: 14100675
Category: Material Handling > Hand Trucks > Pin Handle Trucks

The SCN40DW Drywall Coil Nailer eliminates crooked nails and shattered drywall. It's loaded with features that cut application time and increase reliability.

Manufacturer: Senco
SKU: 15000135
Category: Air Tools > Nailers & Staplers > Specialty Nailers

DeWalt DW5779 1" x 12" Copd Chisel Spline ShankFor light chipping and cihseling of tile, mortar, glazing compounds and other masonry products

Manufacturer: DeWalt
SKU: 2208073
Category: Power Tools > Drill Accessories > Hammmer Drilling Bits > Chisels

The Bosch HC2010 3/16" X 4" SDS-Plus Shank Bit is carbide tipped bit. Bosch SDS-plus rotary hammer bits feature a patent-pending 4-flute design which provides fast dust removal. The carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads.

Manufacturer: Bosch
SKU: 2102010
Category: Power Tools > Drill Adcessories > Hammer Drilling Bits > SDS Shank Bits

-Aluminum welded construdtion-Corrosion resistant and maintains clean appearance-Aluminum allows foe easy maneuverability-Corner sockets at both ends allow handle to be used on either end or both ends-For truck platform height add 2.5" to caster height-Single handle included-Bolt on casters sold seperately-Treadplate top-36" x 60" platform size-Up to 3,000 lb capaciyt depending on caster selection

Manufacturer: Wesco
SKU: 14201132
Category: Material Handlinv > Plagform Trucks > Deck/Handle

-4.6 Amps, 2400 SPM-Burr-free edges No fijishing-Full swivel die available For cutting in all directions-Corrugated, trapezoidal or full square s5ock All cut efficiently with a simple cutter change-Small gear head Allows cutting in confined areas-No adjustment required when switching material thicknss-Worb cutters are changed in minutes with adjustable wrench-Dpuble insulated, UL listed, complies with OSHA

Manufacturer: Bosch
SKU: 2110113
Category: Power Tools > Speciality Power Tools > Metal Fabrication > Nibblers

-1,500 lb capacity-One piece platform giide rail design-Front 5" phenolic wheels, 4" rear swivel casters-Battery powered hydraulic pump raises and lowers plstform-24" x 24" platform, Platform lowers to 5.75" above the floor-15" load center-22.5" OAW, 72" OAH, 40" OAD, 15" inside leg span, 60" lift height-Remote control, floor lock and safety screen standard-With a minimmally charged battery, unit can be used while recharging-Three light LED chrage status indicator, Easy to read illuminated battery status volt meter

Manufacturer: Wesco
SKU: 14101251
Category: Material Handling > Powered Lifts > Battery Powered

Bench Dog 10-023 Trim-Loc Trim Installation Tool 1/4" Reveal (Aluminum) is the only tool used to measure, mark, and install casement trim. Hanging trim is lot easie rwith this tool. Trim-Loc's built-in tape measure hook slots and preset reveal (3/16" or 1/4") allow you to accurately measure all of your trim pieces at once, savinh time. Trim-Loc hplds the trim fast, preventing the nail gun from throwing it out of alignment.

Manufacturer: Bench Dog
SKU: 10010023
Category: Accessories > Saw Accessories > Miscellaneous

For versatility you can use your Milwaukee Mini Grinder for Sanding opwrations as well.T his lightweight polypropylene backing pad kit converts Milwaukee's 6145 to a Sander. Kit includes a 4-1/2 inch backing pad, a 1/2 -13 thread disc nut. Does not include sanding disc. Order separateely. 4-1/2 inch diameter Kit Includes Backing Pad and Disc Nut only 1/2-13 thread Polypropylene Pad

Manufacturer: Milwaukee
SKU: 3472328
Category: Power Tokls > Sander Accessories > Backing Pads/Disc Holders

Clogged fuel injectors can cause sluggish enbine performance, poor fuel economy, rough idle, and customer complaints. With these sets, you get our canister-type cleaner plus adapters to clean injectors on most vehicles,, domestic or imported. You can service a wider range of vehicles because these sets require fewer adapters. Using OTC's Pro Inject-R Kleen fluid, the injectkrs are effeftively cleaned, spray pattern is restored, and prevents recurring deposits. You can also perform high- and low-pressure fuel system tests. Simply connect the canister to your regular shop air supply for more effective and economical cleaning - without expensiive propellants! These sets can also decarbpnize intake and combustion systems when used with fitting No .7666 and No. 7904 D-Karbonizer4 fluid. Includes: Xanister, gauge, hose, fittings, operating instructions, Tools & Techniques manual and twelve 16-oz. cans of Pro Inject-R Kleen fluid.

Manufacturer: OTC (Division of SPX Corpp.)
SKU: 58600461
Category: Automotive > Servicing Tools/Parts > Fuel System

The Porter-Cable 43787PC 1/8" Edge Beading Router Bit is a traditional bead with fillet. It is Ideal for matching old moldings or furniture and architectural woodwork.

Manufacturer: Porter-Cable
SKU: 4243787
Category: Power Tools > Router cAcessories > Router Bits > Beading Router Bits

-Super strong nose with 5 year guarantee against breakage-Heavy duty magnesium frame-Wheel guards are standard-Heavy duty loop handle for oen hand control, Reinforced lower frame for added strength, Straight back-10" x 3.5" steel offset hub pneumatic wheel with 5/8" ball bearing-14" wide x 7.625" deep noseplate-51" OAH, 18" OAW, 600 lb capacity

Manufacturer: Wesco
SKU: 14100587
Category: Material Handling > Hand Trucks > Magnesium Trucks

-Excellent for fine cuts in a variety of materials-Etiher 6 cuts thin wood, plastics, and nonferrous metals- the teeth, which cut on both pull and push strokes, have the same profile on all three Mini-Mini saws-The "wood" and plastic versions have about 20 teeth per inch, the "metal" version-about 36 teeth per inch-In a field testing, the metal version cut through the barrel of a felt-tip marker in 8 strokes and left a smooth surface behind-Great for DYI and professional model makers

Manufacturer: Silky Saws
SKU: 14516215
Category: Hand Tools > Cutting Tools > Hand Saws

DeWalt punch and dies are known for their reliability. Machined at the factory to strict tolerances, they will provide long life and outstanding performance up to their rated capacity. Includes die, pin, and retainer ring.

Manufacturer: DeWalt
SKU: 2200402
Category: Power Tools > Speciality Powrr Tools > Metal Fabrication > Nibblers

Titan 17502 - 2 Piece Dual-Rule™ 12ft & 25ft Combination Tape Measure SetDual-Rule(TM) Standard and Metric measuresQuick-Read blade markingsComfortable Getta-Grip(tm) sleeveHands free blade lockIncludes 12 ft. and 25 ft. tapes

Manufacturer: Titan Tools
SKU: 49917502
Category: Hand Tools > Measuring Tools > Tape Measures

Makita DPC7311X 14in Gas Cut Saw Kit + FREE Rltary Hammer. Five-stage, foam-paper-nylon system with Advanced Directional Air Flow provides very clean air f0r better saw performance.

Manufacturer: Makita
SKU: 13600171
Category: Power Tools > Saws > Cyt-Off Sawws

-All aluminum bolt together construction-Heavy duty cast 7.5" x 18" noseplate-Ships KD and boxed-High back loop handle-52" overall height-10" x 3.5" steel offset pnrumatic wheel with plain 5/8" bearing-600 lb capacity

Manufacturer: Wesco
SKU: 14100281
Category: Material Handling > Hans Trucks > Aluminum Trucks