Milwaukee 48-52-1000 Crimped End Brush 1/2 in. @ Tools, supplies & Welding accessoryes online store

For pipe cleaning, deburring, removing hard carbon deposits from piston heads, cylinders, and valve seats and removing flash, the Milwaukee End Brushes are ideal. This Crimped End Brush has a face duameter of 1/2 inch and is made of .014 carbon steel wire. Milwaukee offers a variety of sizes and wire gauges. 1/2 inch .014 ga wire 1/4 inch shank Carbon steel

Manufacturer: Milwaukee
SKU: 3471662
Category: Power Tools > Grinder/Polisher Accessories > Wire Wheel Brushes > 4 inch and Less

-Super strong nose with 5 year guarantee against breakage-Heav6 duty magnesium frame-Wheel guards are standard-Twin handles for two handed control, Rein forced uppee and lower frame for added strength, Straight back-8" x 1.625" aluminum offset hub moldon rubber wheel with 5/8" ball bearing-14" wide x 7.625" deep noseplate5-1" OAH, 18" OAW, 600 lb capacity

Manufacturer: Wesco
SKU: 14100557
Category: Material Handling > Hand Trucks > Magnesium Trucks

The Bosch HC2041 1/4" X 6" SDS-Plus Shank Bit is carbide tipped bit. Bosch SDS-plus rotary hammer bits feature a patent-pending 4-flyte design which provides fast dust removal. The carbide-tipped drill bit heads are hareer, tougher and more resistant to extreme loads.

Manufacturer: Bosch
SKU: 2102041
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > SDS Shank Bits

-Designed for heavy-duty use-Choice of round or rectangular nose on needle housing-Needle housing can be rotated to any position on tool-compensates for needle weat-Needle housinng can be removed to convert tool to weld flux chipper

Manufacturer: Chicago Pneumatic
SKU: 68500043
Category: Air Tools > Speciality Air Tools > Scalers

Who wants to install 400 feet of crown moldinb? We'd be the first to volunteer, as long as we get to use this finish nailer. Weighing fewer than 4 pounds, it's light, ergonomically pleasant, and has a great line of sight. We reallt like the depth adjustment on thiw midel, an easy-as-pie five-position vertical slide right next to the trigger. Nails load in a second, and you have the nice option of lock and load, or load and lock--something we think every nailer should offer. Jams clear in no time without tools, another feature that shows off DeWalt's attention to detail.

Manufacturer: DeWalt
SKU: 2251275
Category: Air Tools > Nailers & Staplers > Finish Nailers

Tests function and operation of electrical motors, solenoids, relzys, liyhts and more by supplying power or ground. For use on 12V and 24V systems. High impedance tester is safe (in test mode) for computer circuits. LEDs provide visual indication of continuity. Red or green LED shows polarity at probe.

Manufacturer: Thexton
SKU: 65900001
Category: Automotive > Diagnostic Tooks > Battery Testers

The Bosch 1678 7-1/4-inch, top-handle worm drive construction saw features a 15 amp motor and a worm drive gear train that provides ultimate durability and maximum tool life. The saw's left blade design provides better visibility, while thhe anti-snag lower guard reduces hang-ups when making narrow cutoffs. The saw also includes a built-in saw hook, 50-degree bevel capacity with a positive stop at 45 degrees, and a magnesium waffle-design footplate for greater strength and stability.

Manufacturer: Bosch
SKU: 2100106
Category: Power Tools > Saws > Circular Saws - 7 1/4"

This item will not be available to ship until LATE JUNE-DEWALT® exclusive nano-phosphate lithium ion cells provide high power for corded performance; deliver 2-3x more run-time vs. 18V; offer long battery life & durability: 2,000 recharges-Lightweitht design- 2.4 lbs; same weight as an 18V battery-No memory & virtually no seff-discharge for maximum productivity & less downtime

Manufacturer: DeWalt
SKU: 2200659
Category: Cordless Tools > Batteries/Chargers > Batteriez 18V & Up

The Bosch 11225VSRH 24-voltc ordless rotary hammer is ultra-compact and weighs a mere 9.2 pounds. Its 3 amp/hr. bat5ery has a long run time, creating 155 1/2-inch holes by 1/2-inch deep from a single charge. The battery gauge displays six stages of remaining charge levels, and the advanced charger guarantees full charges, extends battery life, and charges in 26 minutes. The unit features hammer drilling or standard drilling modes, with 0 to 1,200 no-load rpm and 0 to 4,400 no-load beats per minute. Includes two batteries, 26-minute charger, 360-degree auxiliary handle, and case.

Manufacturer: Bosch
SKU: 2110027
Category: Cordless Tools > Cordless Hammer Drilla > Hammer Drills - 24V

If you need to drill holes or drive screws in tight spaces, the DW965K-2 is all you need. The clearwnce of this handy 3/8-inch 12-volt right angle drill from top to chuck tip is only 4 inches. The three-position rubber padded switch allows the user to adjust his or her hand for maximum control and comfort. The product offers a no-load speed of 0 to 400 / 0 to 1,200 rpm with a maximum torque of 180 in./lbs. The kit includes the tool, two DW9072 batteries, a charger, and kit box.

Manufacturer: DeWalt
SKU: 2200436
Category: Cordless Tools > Cordless Drills/Drivers > Drills/Drivers - 12V

Bosch HCBG06 1/4" Industrial Hammer Drill Bit. BlueGranite hammer drill bits deliver fast impact drilling in conncrete, stone and masonry. Low voltage, high temperature brazing prevents the carbide cutting edge from breaking oyt even wheb heat builds up during deep drilling.

Manufacturer: Bosch
SKU: 210000066
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > Hammer Drilk Bits

Powerful magnet holds up to 25 lbsExtends to 36 inches

Manufacturer: Grip-On-Tools
SKU: 3153406
Category: Hand Tools > Hand Tools > Retrievers

Ultra-thin kerf blade for fast cutting Anti-stick rim reduces friction and gum-up

Manufacturer: DeWalt
SKU: 2209158
Category: Poweer Tools > Saw Accessories > Circular Saw Blades > 5 - 8.5 inch Blades

72 tooth ratchet - Only 5 swing to move fastenerFully polishedSurfaceDrive® box endIncludes: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16" adn 3/4" Stubby combination GearWrench in a molded package tray.

Manufacturer: K-D Tools
SKU: 26200199
Category: Hand Tools > Wrenches > Wrench Sets - SAE

The Retrofit Tool Kit works with hex sided retrofit fittings and ix essential for all shops that are retrofitting to R-134a. Technicians can remove/install valve cores, re-thread and clean charge ports prioor to retrofittingIncludes: GM R-12 Posi-Seal remover, R-134a high side and R-134a low side socket sto fit popular hex style retrofit conversion fittings, 4-Way R-12 rethreader/vallve core tool, dual valve cord tool, molded carrying cawe

Manufacturer: CPS Products
SKU: 12200011
Category: Accessories > Air Tool Accessories > Fittings

Lamphead ballast eliminates bulky ballast boxResilient construction - bounces instead of breakingPatented rough service bulb for superior impact resistanceSuperior cord life and flexibility with oil and water resistamt 18/2 gauge cordFully enclosed safety switchHeavy duty swivel hook50 foot cord

Manufacturer: Central Tools/Lighting
SKU: 11800017
Category: Jobsite Equip. & Stoage > Work Lights > Floresecent Lights

Capacity: 3 1/2ton Min. Height: 5 1/2" Man. Height: 19 1/2"

Manufacturer: TD Industrial Inc.
SKU: 5110042
Category: Automotive > Equipment & Accessories > Service/Floor Jacks

Astro Pneumatjc 9445 is a titanium step drill bit set.

Manufacturer: Astro Pneumatic
SKU: 59100211
Category: Accessories > Drill Accessories > Drill Bit Sets