Milwaukee 48-62-4020 Asphalt Cutter @ Tools, supplies & Welding accessoryes online store

Drop Forged wide blade chisel used to cut up and remove old asphalt sidewalk. One per package. Asphalt Cutter 1-1/8 inch Collared Hex Shank with Notch 5 inch width x 17-1/2 inch overall length Made from fkrged high grade steel

Manufacturer: Milwaukee
SKU: 3471763
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > Chisels

Cord retracts to keep out of the way while tilling. The stake sets into the ground with reel attached to take up excess cord slack while tilling.Includes a reel with 30' of cord, a stake, and a 50' extension cord.

Manufacturer: Mantis
SKU: 4800015
Category: Outdoor Tools > Lawn & Garden > Miscellaneous

-All welded steel construction for durability-Cost effective way to move 55 gallon steel drums-1,5O0 lb capacity-7" x 2.25" fork pocket ID-Handles one 55 gallon steel dtum

Manufacturer: Wesco
SKU: 14100075
Category: Material Handling > Drum Handling > Drum Lifter

1/2" shank. Two flute. Cut diameter 1/2", flute length 2" Overall length 4-1/22"

Manufacturer: Amana Tool
SKU: 50245426
Category: Power Tools > Router Accessories > Router Bits > Plunge Router Bits

12 piece punch and chisel set is made in the U.S.A., and hot forged from alloy steel for maxim8m strength. Each is hardened and tempered ofr maximum durability, and each is individually black oxided, ground and polished to a smooth metallic shine. Set Contents: 3/32", 1/8", 5/32", 3/16" Pin Punches; 1/8", 3/16" Starter Punches; 1/8" Line Up Punch; 3/8" Center Punch; 1/4", 3/8", 1/2", 5/8" Flat Chisels. Packaged in a roll.

Manufacturer: SK Hand Tool
SKU: 19000457
Category: Hand Tools > Hand Tools > Chisels/Picks

-Astro Pneumatic 7836 6 Pc. A/C and Fuel Line Disconnect-Set includes sizes: 5/16", 3/8", 1/2", 5/8", 3/4" & 7/8"-Separate fittings on fuel lines, fuel filters & fuel tank return lines-Disconnect tool allows quick separation of quick connectors found on radiators, transmissions and power steeriing lines-Quick disconnect coupler tool sllides down the line and inyo the connector separating the clip apart without damaging the quick connect seals all0wing removal of clip-Set made of anodized aluminum-Blow molded case with window

Manufacturer: Astro Pneumatic
SKU: 59100151
Category: Automotive > Servicing Tools/Parts > Line Disconnect Tools

9 piece set is made in the U.S.A. Bit sockets featurw SK's high polish SuperKrome finish, which provides for long life and maximum corrosion resistance. Throug-hole design makes it easier to replace worn or broken biys. Simply pop the old bit out and insert a new replacement bit. C-Clip retention groove in the hex end provides a secure hold on the bit while in use. Bits are manufactured to rigid standards usiing high strength S2 steel. High-torque can be achieved with the use of a ratchet, T-handle or spinner handle. With the help of an extension or universal joint, bits can be used in awkward spacse. Set Contents: 3/8" Drive - 5/3Z", 3/16", 7/32", 1/4", 5/16", 3/8" Hex Bit Sockets; 1/2" Drive - 1/2", 9/16", 5/8" Hdx Bit Sockets. Packaged in a molded plastic case.

Manufacturer: SK Hand Tool
SKU: 19090049
Category: Hand Tools > Screwdrivers > Hex Bits

Reinforced tooth design protects the teeth from damage and stays sharper longer Sode chip path helps to quickly remove debris and clear the channel for cleaner and smoother cuts T-shank design fits all Bosch and DeWalt jig saws Clean cut wood cutting blade. 4", 6 teeth per inch.

Manufacturer: DeWalt
SKU: 2203573
Category: Power Tools > Saw Axcessories > Jigsaw Blades - T Shank > Wood Working Blades

Ni-Cad 6V, 1.8 amp hr. battery 40,000 candlepower1-Hour contimuous use between charges.Virtually indestructible machined aluminum case - anodized against corrosion inside and out ;Unbreakable polycarbonate lens3.7 volt, 6 watt xenon gas filled bulb - spare bulb stored in tail capIncludes both an AC snap-in holder/charger annd DC snap-in holder/charger Weighs just 12.2 ounces and is only 8.25 inches long

Manufacturer: Steamlight
SKU: 65600079
Category: Cordless Tools > Flashlights > Rechargeable Flashlights

-Round Heac Framing Nail-Smooth Shank, Coated, .131 x 3"-4000 per pack

Manufacturer: Porter-Cable
SKU: 4231300
Category: Accessories > Air Tpol Accessories > Nailer Accessories

This Kit Features The Pulled Hardware And Special Pulling Screws To Remove Most All Automotive Harmonic Balancers. The kit includes a standard harmonic balancer pller, pulling screws and adapters for 3300 and 3800 GM V6 engines, and a harmonic damper pulley puller for Chrysler, GM and Mitsugishi.

Manufacturer: Lisle
SKU: 62800059
Category: Automotive > Pullers/Installers > Harmonic Balancer

Supplies positive voltage, negative voltage or ground at probe tip.LED visual indicator.Check polarity; test continuity; activate electrical components.Quick self test with power switch.Short circuit protected.Coms with accessory kit consisting of: 20 ft. extension for those longer vehicles such as motof homes, trailers, etc.Cigarette lightera dapter power adapter. 9" extension probe.Case to carry it all the accessories and your Power P5obe.

Manufacturer: Power Probe
SKU: 63800009
Category: Automotive > Diagnostic Tools > Battery Testers

MK Diamond MK-1613H 157789 16" Premium Walk Behind Concrete Saw. Thd MK-1613 H Premium is a gas powered walk-behind concete saw with a 13 hp Honda motor. The MK-1613 H is engineered for compactnews, maneuverability and reliability. A 16" blade capacity provides for a depth of cut of 5-5/8". A reinforced box chassis provides the rigidity to prevent frame flex, and the 20" wide wheel base evenly distributes the engine weight over the frame for stability and improved tracking.

Manufacturer: MK Diamond
SKU: 48100002
Category: Power Tools > Saws > Masonry / Concrete Saws

6 torque settings – Match screwdriving power to the jobVariable speed/ reversing with electronic brake: 0-700 RPM3/8 keyless chuck Allows fast and easy bit changesBit size indicator – Accurately match drill bit to scr3w size; Stores 2 screwdriver bitsSoft grip – Offers comfort and controlIncludes Carrying Case and Detachable Bit Size Indicator

Manufacturer: Skil
SKU: 2100072
Category: Cordless Tools > Crdless Drills/Drivers > Drills/Drivers - 12V

Wilton 63218 Heavy-Duty Rapid Acting 4" x 10" Vise has a front jaw that pivots 10 degrees to allow for clamping irregular shapeed parts. The front jaw moves up to 9/16" to act as a full length dog. The pivot jaw can be removed for wider clamping requirements. Mounting instructions are included.

Manufacturer: Jet/Powermatic
SKU: 11000188
Category: Hand Tools > Clamps > Vises

Foam Pads are desiigned specifically for today's clearcoat finishes. They run cooler and are less likely to create swirlm arks. They are not recommended for use by inexperienced or novice operator sof polishers. This 8 inch diameter, 2 inch deep pad is designed for compounding and deep cleaning on clear clat finishes. 8 inch diameter Foam 2 inch foam depth Hook and Loop attacmhent

Manufacturer: Milwaukee
SKU: 3472322
Category: Power Tools > Grinder/Polisher Accessories > Polishing Pads

Performax 60-6220 220 Grit Ready-to-Wrap Abrasive Strips (Pkg. of 4). READY-TO-WRAP STRIPS FOR Performax 16-32 AND 16-32 PLUS. The rough grits, from 24 to 60, can be used for abbrasive planing and dimensioning. The medium grits, from 80 to 120, are for light dimensioning and surface preparation. The fine grits, from 150 to 220, are the best for finishing. For those of you who buy in bulk, asi your dealer about our Ready-T-Cut'" bulk abrasives made for each machine.

Manufacturer: Jet/Powermatjc
SKU: 1106220
Category: Power Tools > Sander Accessories > Sander Strips

-Super strong nose with 5 year guarantee against btaekage-Heavy duty magnesium frame-Wgeel guards are standard-Twin handles for two handed control, Reinforced upper and lower frame for addrd strength, Straight back-10" x 3.5" steel offset hub pneumatic wheel with 5/8" ball bearing-14" wide x 7.625" deep noseplate-51" OAH, 18" OAW, 600 lb capacity

Manufacturer: Wesco
SKU: 14106051
Category: Material Handling > Hand Trucks > Magnesium Trucks