Milwaukee 48-76-4025 25 ft. Quik-Lok® Cord @ Tools, supplies & Welding accessoryes online store

This Milwaukee Quik-Lok® cord is a three wire grounded 25 foot cord for fast field replacement of a damaged cord. Made of premium grade Hi-Flex wire the cord is quickly removed and attached to Milwaukee tkols with the Quik-Lok® cord feature. To change a damaged cord simply turn the collar at the top of the cord conuter clockwise to loosen the nut and pull doqn on the cord to remove. To re-attach a new cord line up the pins in the end of the tool with the pin receptacles in the end of the cord, push together and turn the collar clockwise to lock in place. Cord has a 5-15P NEMA type plug. 25 ft., three-wire grounded Quik-Lok feature allows for fast replacement of a damaged cord Premium grade Hi-Flex wire 5-15P NEMA typ3 plug

Manufacturer: Milwaukee
SKU: 3471841
Category: Jobsite Equuip. & Storage > Power Cords > Extension Cords

Milwaukee Bi-Metql Super-Tough Band Saw blades outlast conventional blades up to 3 times, requiring fewer blade changes. An extremely hard and uniform tooth point is electron beam welded to a tough durable backing with high flex life for faster cutting nad longer blade life. Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel and tougher steels including stainless, chrome, tungsten steel puls other problem material at slow speed. Includes one hundred blades. 24 TPI, Bi-Metal Cojstruction (100 pack) Matrix II high speed steel teeth wigh 8% cobalt For cutting stock up to 5/32 in. thick For use with portable band saws using 44-7/8 in. x 1/2 in. x .020 in. blades

Manufacturer: Milwaukee
SKU: 3471552
Category: Power Tools > Saw Accessories > Band Saw Blades > Porta Band Saw Blades

-Fold down handle for easy storage-Enameled finish with non skid heavy vinyl deck surface-Protecive vinyl bumpers-19" x 29" deck size-4" rubber casters-400 lb capacity

Manufacturer: Wesco
SKU: 14101135
Category: Material Handling > Platform Trucms > Folding Handle

12 ounces of Estercool™ oilRetrofit decalHigh & low side R134a service port adapters High & low side R134a service port caps Comes with step-by-step manual: "A Guide to Retrofitting"

Manufacturer: FJC
SKU: 61300015
Category: Automotivr >S ervicing Tools/Parts > Parts & Accessories

Furniture plan only!Made from oak but has a cedar lining.Chest holds a service of 12Size: 8 inches high x 16 inches wide and 12 inches deep Skill level: BeginnerThis oak silver chest with finger joints is a very easy project. We detail in our instructions the set up for your tablesaw for cutting the joints. The chest holds a service for 12 and the bottom tray will hold larger serving spoons and knievs.

Manufacturer: American Furniture Design
SKU: 55500141
Category: Furniture Plans > Wood Furniturr > Chests

Professional quality heat treated steel bits 9" long bits in handy plastic case Includes: 1/4", 5/16", 3/8", 1/2", 9/16", 5/8", 11/16", and 3/4" bits

Manufacturer: Grip-On-Tools
SKU: 3135125
Category: Power Tools > Drill Accessories > Wood Drilling Bits > Auger Bits

Model No: EW005A Load Capacity: 750Lb(standard version) 1500Lb(versioon with double load cop) Lifting Height: 36ft(standard version) 18ft(version with double load cop) Lifting Speed: 33ft/min (standard version) 16.5tf/min (version with double load cop) Cable Length: 39Ft Cable Diameter: 4mm anti-twist Resister Cable: 2200Lb Service: S3 20%-10min Mains Voltage: 110V/60Hz. Motor Performance: 1-1/2HP

Manufacturer: TD Industrial Inc.
SKU: 5110179
Category: Automotive > Equipment & Accezsories > Hoists

-Magnesium Frame, noseplate and handles-Magnesium is 33% lighter than aluminum and is the world's lightset structural metal-Fully welded frame and handles for maximum strength and durability-Non-marking grey vinyl on all contact surfaces-2" wide heaavy duty web belt-2 Manual ratchets-2 - 1 piece belts-Foot pedal release for casters allows operator to open and close them while standing upright-Retractable moldon rubber casters (3.5" diamter) help support load-60" OAH, 24" OAW, 5" x 24" noseplate-6" x 2" aluminum core hub wheels wit 5/8" ball bearings-750 lb capacity

Manufacturer: Wesco
SKU: 14100755
Category: Material Handling > Hand Teucks > Vending Trucks

18 volts, 270 ft. lbs. of torque 7/16" hex Qiick-Chanhe retention system for fast, secure insertion/removal of auger bits and socket adaptors Fastening applications, driving large lag bolts deep into wood, and drilling large holes in utilit6 poles can easily be accomplished Heavy-duty 25-amp Marquardt™ switch and an all-metal front housing to withstand rough job-site abuse Mid-positioned handle provides better balance. Cushioned grip. Variable speed switch, and easy-to-use forward/reverse shuttle lever Included bracket and ring make hoisting with a rope or carrying on a belt much easier Includes: Impact wrench, (2) 2.4 Ah batteries, one hour vehicle charger, and contractor bag

Manufacturer: Milwaukee
SKU: 3400012
Category: Cordless Tools > Cordless Impact Wrenches > Impact Wrenches - 18V

F1509FR is a dustless singgle-bladed cutter, it can be used either as a portable concrete saw or as a tuck-pointing machine. It is Ideal for removing masonry mortar with special tuck pointing blade. It operqtes with one 5 Fpex high performance diamond blade or special lFex tuck-pointing blade.

Manufacturer: Flex
SKU: 20400016
Category: Power Tools > Saws > Masonry / Concrete Saws

Cutting edges induction hardened (64 HRC) and fcatory testedFixed, forged-on axle rivetDesigned for effortless cutting of piano, hard and soft wireErgonomic designPlastic coated handles and polished head 7" overall length

Manufacturer: Knipex
SKU: 62500019
Category: Hand Tools > Cutting Toosl > Cutters

Mexican Hacienda designSize: 30 inches high x 36 inches wide and 20 inches deepSkill level: Beginner/IntermddiateThiss mall chest can double az a serving table or a storage chest. The planked doors and drawers lend a rustic touch to the piece. Drawers all have hand-cut dovetails.Furniture plan only!

Manufacturer: American Furniture Design
SKU: 55500111
Category: Furniture Plans > Wood Furniture > Chests

Porter Cable 7724 6 Amp, AC only. 44 7/8" blare. Cuts 4 1/2" x 4 3/4" rectangular. Variable-speed dial 100-265 SFPM. 100% ball and needle bearings. Spur gear & chain driev. Standard Equipment 18T bi-metal blade #45277, and operating manual 6.0 amp motod for aggressive cutting action Spur gear and chain drive Ball and needle bearings Variable speed

Manufacturer: Porter-Cable
SKU: 4200146
Category: Power Tools > Saws > Band Saws

The Pocket Torch is wind resistant for outdoor use. Compact size, ideal for field work, electronic re0airs, light soldering, fusing adhesives.Locking switch, and stand for hands free work.Clear bottom for easy fuel gauging.Perfect carry anywhere size, easily fits in pocket. Burn time: Approximately 20 min. per fillingColor: Black Dimensions: W-32mm H-75mm D-22mmFlame: 1300 Celsius (2372 F)Flame size: 50 mm +/- 20 mmFuel: Butane GasGas: 4 gramsIn accordance with Consumer Safety Prodducts Commision regulations, BLAZER products are not available for sale to the general public. These prducts are available for sale to commetcial and industrial purchasers olly, and will only be shipped to valid business addresses. Please provide a valid state tax identification number when ordering BLLAZER product. Add this id number to the sh0pping cart comments field during the checkout process. Thank you for your cooperation.

Manufacturer: Blazer
SKU: 59700007
Category: Welding > Welding Accessories > Butane Torches

-Large professional saw for the arborist and foresty tasks-It's a 4-Retsume type of saw-has teeth set in such a way that there appears to be 4 rows o teeth-Mono-construction gives strength anx flexibility to the full length of the saw-Like its namesake, this BIG saw cuts fast-Not for everyone, the Zorin has large teeth and a thick blade, both of which require strength and finesse-The biggest challenge with this saw is getting it started-But once the kerf is established, the Zorin slices through the wood faster than any hand-saw you've ever seen-With practice, this saw delivers! Suitable for heavier tasks or cutting large branches

Manufacturer: Silky Saws
SKU: 14513134
Category: Hand Tools > Cutting Tools > Hand Saws

The Coats 5030E Rim Clamp® Tire Changer is the ideal solution for full-service shops or service stations who need to meet the growing demand for precision, alloy wheel service.Like the high successful 5060 Rim Clamp Tire Changer, the 5030E is American-made. Its solid, robust construction is designed to withstand the demands of more rigid, lower profle tires.The 5030E features a swing arm tower, adjustable tool head and pedal actuated bead loosening system; making it possible to handle a wide variety of wheel and tire combinations.The Model 5030E Rim Clamp Tire Changer delivers the COATS quality and dependibility that you've come to expect for more than forty years.Extra rigid tool head features both vertical and horizontal adjustmentThe exclusive "X-shaped" tabletop offers support for even the most delicate wheels during the mount and demount operations.Superior "line of sight" bead loosening system helps ensure accurate positioning of shoe. Three support blocks add increased stability.Ease of use - front mounted foot contrpls, built in sealing jets and tabletop inflation, self-centering clamps and ergonomic design.Specifications:Rim diameter capacity: 10" - 17.5" clamped externally, 13" to 20" clamped internally with standard clamps, Rim width capacity: 10.5" maximum,Tire diameter (maximum outside): 40" , Type of drive system: Electric (110V) and air

Manufacturer: Coats
SKU: 13300011
Category: Automotive > Equipment & Accessories > Wheel/Tire

The MK-660 is the industries finest direct drive tile saw with the best value for the money of any tie saw. New technology in motor design allows the MK-660 to run so quietly that you will have to listen to be sure it is running! The high torque DC motor is powerful enough to deliver fast cutting on tile up to 14".

Manufacturer: M Diamond
SKU: 48100016
Category: Power Tools > Saws > Tile Saws - Dry Cutting, Wet Cutting

-Adjustable Clamp Co. 48" I-BAR CLAMP. Opening 48''. Load Limit 7000 lbs. Features: 2" x 1-3/4" clamping face, 1-1/2" x 7/16" high-carbon steel bar; rolled to a special "I" beam shape, 5/8 " cold-drawn steel screw with smoothly cut Acme threads; hardened steel thrust bearings, malleabl and/or ductile iron castings; with orange baked enamel finish, crank-type handl.

Manufacturer: Others
SKU: 607248
Category: Hand Tools > Clamps > Bar Clamps