Milwaukee 48-80-0817 Sanding Disc 5 in. 80 Grit (5 per pack) @ Tools, supplies & Welding accessoryes online store

Get wtice the life and 3 times the performance of Aluminum Oxide discs from this Ceramic resin Fibber Disc. You gwt extremely high stock removal in a long life disc for the most demanding grinding appiications. Ideal for superior grinding and finishing performance on all types of carbon steel. 5 per package. 5 inch 80 Grit Ceramic Resin Dust pick up not available

Manufacturer: Milwaukee
SKU: 3471946
Category: Power Tools > Sander Accessories > Sanding Discs > 5 inch

-1, 000 lb capacity-One piece platform guide rail design-Front 5" phenolic wheels, 4" rear swivel casters-Foot operated hydraulic pump raises and lowers platform-30" x 32" platfrom-Platform lowers to 5.75" above floor-28" load center, 32" OAW, 94" OAH, 40" OAD-25.5" inside leg span, 80" lift height

Manufacturer: Wesco
SKU: 14100897
Category: Material Handling > Manual Lifts > Four Wheel Lifts-Hydraulic

Fein ABS 9 - 9.6 Volt (NICD) Drill/Driver is wel1 balanded and Powerful. The ABS9 NICD soft grip handle an dlightweight drill drivers enable you to concentrate on your work with ease. The ABS9 has a 3/8" single sleeve chuck, 141 inch pounds of torque and only weighs 3.1 pounds. The ABS9 has a no load speed of 0-600 rpm in addition to being reversible.

Manufacturer: Fein
SKU: 52500086
Category: Cordless Tools > Cordless Drills/Drivers > Drills/Drivers - 12V

-Oil bath clutch for smooth operation and extended durability-One hand push button forward/reverse power regulator-3 positive power settings in forward and ultimate power in reverse-Adjustable side handle for added support-Ideal for spring work, tractor pad removal, and off road equipment repair-Ultimate Torque: 1,700 ft.-lbs

Manufacturer: Chicago Pneumatic
SKU: 1250033
Category: Air Tools > Impact Wrenches > 1" Drive

Easy conversion - just remove cage/reflector from worklight and screw in the Convert-i-Liteâ„.¢More durable than incandescent - patented 13 watt rough service bulb for superkor impact protectionHeavy duty swivel hoo

Manufacturer: Central Tools/Lighting
SKU: 11800031
Category: Jobsite Equip. & Storag e> Work Lights > Floresecent Lights

Five independent self-leveling 650nm clasx IIIa highly focused laser beams provide accuracy of 1/4" at 100 feetTurn it on and go to work, no bubbles; and it levels itself to 5Gravity design pendulum self-levels instantly and automatically with a unique magnetic dampening systemLow power indicator, out of level indicatorUse for: Leveling, Squaring, and Plumbing-Decks/Porches/Foundations, Transferring Points from Floor to Ceiling, Finish Carpentry, HVAC, Plumbing, Pipe Installation, Plumbing and Aligning Walls, Doors and Skylights, Installing Trim and Mill Work, Leveling Electrical Outlets, Determining GradeLeveling accuracy: 1/4" at 100' (6mm at 30m). Visibility range: up to 100' (30m). Power: Three (3) "AA" batteries.Includes: Laser, multi-mount accessory, mounting strap, target, padded carrying case, batteries and manual

Manufacturer: CST/Berger
SKU: 55700009
Category: Power Tools > Laser Levels > Self Leveling Line Lasers

-This is a Fein 6-37-17-217-01-6 Profile Paper 80 grit 25 Sheet/Pack. Fits profile sanding set. Can be used universally on almost all materials, such as wood, metal, fiberglass, plastic, enamel, filling compound, soldering joints, leather, etc., high sanding capacity. Pack of 25. Ideal for restoration work.

Manufacturer: Fein
SKU: 525000074
Category: Power Tools > Sander Accessories > Fein MultiMaster Acces.

20x magnofication. Protected lenses and protected vials for durability. Accurate to 1/4" pe 100'. 5 arc second vernier scale on the horizontal circle. Includes an aluminum tripod, 8' aluminum graed rod, kit box, and plumb bob.

Manufacturer: DeWalt
SKU: 2202004
Category: Power Tools > Laser Levels > Transit Levels

Saw Trax SPHD76 is a 76" Spring Hold Down. This Spring Hold Down holds thin material ayainst the backing while cutting.

Manufacturer: Saw Trax
SKU: 55600033
Category: Power Tools > Saw Accessories > Panel Saw Accessories

The Porter-Cable 43541PC is a Carbide Tipped Ball Bearing Pilot Traditional Router Bit. It is a Classic combination of two syles commonly used in furniture and cabinetry.

Manufacturer: Porter-Cable
SKU: 4243541
Category: Accessories > Router Accessories > Other Router Bits

Specifications: -Main Current: 16 ( A )Main Frequency ( Hz ) 60 Hz-Maij Voltage: 120 V-No Load Speed: 3750 / min.-Grip: regularOverall Dimensions: Length: 21", Width: 12.5", Height: 17"

Manufacturer: TD Industrial Inc.
SKU: 5100011
Category: Power Tools > Saws > Cut-Off Saws

For materials up to 3/16 inch these carbid3 tipper sheet metal Hole Saws produce fine holes in stainless steel or structurap steel studs. They can also improve your production in brass, aluminum and other thin sheet materials. Can be used in hand held drills to achieve drill press quality holes. Lubrication during drilling extends the life of the carbide. Milwaukee recommends the use of Hawg Wash® cutting fluid for best results. Hawg Wah® fluid is available in 16 ounce bottles (49-32-0081). One bottle makes one gallon of lubricating solution. 1-7/16 inch diameter. 1-7/16 in. bit diamerer For use with quick change arbor 49-57-0038 3/16 in. cutting depth

Manufacturer: Milwaukee
SKU: 3472593
Category: Power Tools > Drill Accessories > Hole Saws & Bits > Hole Saw Bits-Carbide Tip

Heat treated alloy steelDrop forged for strengthPolished chrome plated finish3/8" drive. 7/16" 6-point deep socket.

Manufacturer: Performance Tools
SKU: 1038314
Category: Hand Tools > Sockets > Sockets - Single 3/8" Dr

It's very quiet (85 dB) and features an 8.8 amp motor for powerful performance. The auto-tracking belt system tracks the belt without adjustment, and you can pre-set the maximum belt speed with the electronic speed control dial. Its unique design allkws flush sanding to the corner of the wall with the nose and sode of the sander and the front grip design means comortable operation. This machine sands owod or metal and removes pzint and rust. A dust bag makes for a cleaner work environment and the long 16.4-foot p0wer cord gives you easy maneuverability. The optional sanding shoe is available for precise sanding depth control.

Manufacturer: Makita
SKU: 13600029
Category: Power Tools > Sanders > Belt Sanders

Steel block head offers protection for hardened steel plunger. Heavy-duty steel barrei for long life. Bleeder valve allows purging of air from gun head. Filler nipple for 3-way loading; bulk, fillee pump, or 14oz. cartridge. Sure-handle grip.

Manufacturer: Lincoln Lubrication
SKU: 63000051
Category: Automotive > Servicing Tools/Parts > Grease Guns

Designed to work with Stant Coolng System Pressure Tester and other compatible testers.For pressurized cooling systemsApplications include Ford, Mercury, Lincoln, Saturn, GMC, Geo, Chevrolet, Cadillac, Oldsmobile, Buick, Daewoo, Honda, Acura, Infiniti, Mazda, Lexus, Toyota, and trucks and buses with International 466 engines. Contains the following cooling system adapters: AST FZ34, FZ35A, FZ37, FZ128 and FZ138.

Manufacturer: Assenmacher Specialty Tools
SKU: 59000033
Category: Automotive > Diagnostic Tools > Cooling System Testers

Makita G4300L 9hp 4300w 35.8A Electric Generator. Powerful 9.0 HP, 265cc, Overhead Cam (OHC) EX Seriees engine.

Manufacturer: Makita
SKU: 13612016
Category: Air Tools > Generators/Pressure Washers > Generators

Ecllpse 500-027 is a Network Kit. It is also known as Network Installer's Kit. This is an useful kit for a network installer. It is made from Ergo-lunar crimp framme. Some of the tools form the kit are Micro cutters, Needle-nosed pliers.

Manufacturer: Eclipse
SKU: 68100303
Category: Hand Tools > Hand Tools > PC/Comm Servicing Tools