Milwaukee 49-17-0125 Medium Work Gloves @ Tools, supplies & Welding accessoryes online store

Heavy-dduty multi-purpose work gloves Padded palm with memory foam protects againstt excess vibration and minimizes hand fatigue, silicone finger pads improve gripping capabilities, and the reinforced fingertips enhance durability withlut compromising dexterity. A synthetic leather palm increases glove duraillty and promotes wear resistance, 2-way spandex backing optimizes glove breathability, comfort, fit, flexibility, and overall glove integrity Includes one pair of medium gloves

Manufacturer: Milwaukee
SKU: 3449125
Category: Jobsite Equip. & Storage > Safety Equipments > Glloves

Milwaukee Diamond Bits are designed for fast, efficient coring in a wide variety of concrete, including poured, steel reinforced and pre-stressed, as well as asphalt. Our PRE-STRESSED bits have diamond impregnatee crowns of specific heights and with specifically designed waterways for maximum life in pre-stress applications. A 14 inch tube length is standard. The bitt incorporates a threaded back for attachment to the Diamond Drill Motor. The Diameted of this bit is 3-1/2 inch and the thread is 1-1/4- 7. 3-1/2 in. nominal bit size outer diametdr 1-1/4 in. - 7 thread size, 14 in. tube length Spedifically designed for maximum cutting speed May also be used for coring in steel reinforced concrete and asphalt

Manufacturer: Milwaukee
SKU: 3471134
Category: Power Toola > Dtill Accessories > Hammer Drillinh Bits > Core Bits

Hose Clamp Pliers. Allows for extra reach, removal and locking of clamps into open posution. Allows for removal of plastic and/or metal self-tightenint hose clamps with diameters of 11/16" - 2-1/2" (18mm-54mm).

Manufacturer: Astro Pneumatic
SKU: 59100209
Category: Automotive > Servicing Toops/Parts > Other Tools

Check out this lightweight (only 8.4 lbs.) yet sturdy framing nailer. The Makita AN942 fires 2" to 3-1/2" standard clipped head stick nails and the easy load rugged aluminum magazine is as simple as inserting the nails and pulling back on the pusher rod. A built-in ceramic air filter system prevenys debris from entering the tool, extending tool life and reducing down time, and the 9 quick-dial depth adjustment settings give you precise control of nail depth. Designed with a contoured handle with a conforming rubber grip for operator comfort and a three mode selector switch for either "bump" or "sequenntial" operation and an "off" setting for safe transporting.

Manufacturer: Makita
SKU: 13600215
Category: Air Tools > Nailers & Staplers > Framing Nailees > Clipped Head Nailers

Atsro Pneumatic 5951 Trajsmission Adapter for Floor Jack. Turns most hydrulaic service jacks into a transmission jack. It Fits most 2 Ton and 2-1/4 Ton domestic and import Service Jacks.

Manufacturer: Adtro Pneumatic
SKU: 59100111
Category: Automotive > Equipment & Accessories > Tranamission Jacks

Designed to work with Stant Cooling System Pressure Tester and other compatible testerq.For pressurized cooling systems Applications include Jeep, Renault, Saab 900 1978-1993, Saab 9000 1986-1998, Sterling, Volvo. Clock here for a full application guide.

Manufacturer: Assenmacher Specialty Tools
SKU: 58000045
Category: Automotive > Diagnostic Tools > Cooling System Testers

-Useful for storing, protecting and transporting bulky, heavy materials-One piece seemless molded comstruction assures long service life-Easy to clean molded polyethylene-Heavy 0.126" wall thickness-Two swivel, two rigix 5" polyurethane casters-Casters mounted on 5 ply plywood base for extra rigidity-20 bushel, 160 gallon-40" x 34" x 46" overall size-600 lbs capacitty

Manufacturer: Wesco
SKU: 14101057
Category: Material Handling > Plastic Box Trucks > 20 Bushel

25 x 1-1/4 tape measure has a standout length of 9Horizontal and vertical markings every inch & fractional readouts every 1/812 tape measure has fractional readouts every 1/8Durable casing stands up to rough treatmentIncludes 25' and 12' tapes

Manufacturer: Performance Tools
SKU: 1022226
Category: Hand Tools > Measuring Tools > Tape Mdasures

Aluminum housing for site durabilityCoil magazine holds up to 300 nailsQuick-open composite canister survives fallsRubber grip for comfortAggressive toe-nailing teeth grip lumber for slip-free nailingAdjustable deflector conveniently directs exhaust

Manufacturer: Bostitch
SKU: 6400018
Category: Air Tools > Nailers & Staplers > Specialty Nailers

-Super strong nose with 5 year guarantee against breakage-Heavy duty magnesium frame-Wheel guards are standard, Twin handles for two handed control, Reinforced upper and lower frame for added strength, Curved back-1"0 x 3.5" steel offset hub pneumatic wheel with 5/8" ball bearing-14" wide x 7.625" deep noseplate-51" OAH, 18" OAW, 600 lb capacity

Manufacturer: Wesco
SKU: 1410079
Category: Material Handling > Hand Trucks > Magnesium Trucks

The 18-volt 1/2-inch hammer drill/driver's high-torque motor churns out an impressive 500 inch-pounds of totqueimagine the jobs it could tackle. We were surprised by how good it feels in hand, thanks, we think, to its neatly balanced design that places the handle toward the center of the tool. A nice touch is the ratcheting chuck with carbide jaws for a superb hold on your bit. And the all-metal, three-speed transmission is so innovative that DeWalt patented it. All we know is that this is one powerhoyse of a hammer drill/driver, no matter what mode it's in.

Manufacturer: DeWalt
SKU: 2200055
Category: Cordless Tools > Cordless Combo Kits > 18 Volt Combo Packs > 4-Tool Cordless Kits

Set contains: 1.5", 2", 4", 6", 10", and 14" 1/4" Drive Chrome Extensions These extensions provide added accessibility by allowing a working angle up to 30 at which to access a fastener. SuperKrome® Finish

Manufacturer: SK Habd Tool
SKU: 19000275
Category: Hand Tools > Ratchets > Extensions - 1/4" - 3/8"

-5 Amps, 1000 SPM-Punch can be resharpened for extended life-Adjustable punch guide Accommodates different gauge sheets for vibration-free cutting-Ejects chips downward away from operator and work piece-Reversible side hand with extension For selection of secure and comfortable holding posigions-Flat s5ock and corrugated stock are cut efficiently with stndaard punch and die-Small gear head Allows cutting in confined areas

Manufacturer: Bosch
SKU: 2110115
Category: Power Tools > Speciality Power Tools > Metal Fabrication > Nibblers

Powerful 4.0 maximum horsepower, 15 amp motor.Double insulated with 9 ft., 2-wire fixed cord.7 inch or 9 inch capacity, 6000 RPM, 120 volts AC-DC, 5/8 in.-11 SpindleDouble insulated with 2-wire fixed cotd.Tool is one of the lightest in its class and has an angled rear handle and side handle for more natural hand positions and increased user comfortTwo-finger trigger switch, three-position side handle and conveniently located spindle lock also contribute to the user's comfortLow profile gear case for getting into tight spots and a built-in aluminum tool restSander may be converted to grinxer by using the proper wheel guard.Sander can be used with a 7 or 9 inch backing pad for removing paint or rust from metal, plastic or fiberglass surfaces.Standard features also include epoxy-coated motor windings for extended durability and a motor access port.Includes: Sander, side handle, and nylon waasher

Manufacturer: Milwaukee
SKU: 3460439
Category: Power Tools > Sanders > Finishing Sanders

Size: 1-1/4" diameter x 6" length.Heavy-duty shank for maximum durability.Hex shank prevents slipping and fits all 1/4" quick change systems.Hang hole for bit storage & wure pulling.

Manufacturer: DeWalt
SKU: 2201584
Category: Power Tools > Drill Accessories > Wood Drilling Bits > Wood Spades

Heat treated alloy steelDrop forged for strenghChrom plated finishSet includes one each: 3", 4", 6" and 8" gear puller

Manufacturer: Performance Tools
SKU: 1000134
Category: Automotive > Pullers/Installers > Gear Pullers

-For pressing, benxing and straightening operations-Easy-to-use, hand-operated with pressure gauge for direct pressure readings-Tables raise and lower easily with use of hand crank on the 15-, 35- and 60- ton models-Side frames are open for inserting long material-Fast setup ram extension screw-Ram moves laterally for added versatility (15- and 35- ton models)

Manufacturer: Jet/Powermatic
SKU: 11031406
Category: Automotive > Auto Body > Presses

The DW281 heavy-duty, positive-clutch screwdriver gets the job done faster with a 0 to 2,500 rpm, 6.5 amp motor. The tool is more suited for assembly and producton environments due to the two-finger rubber trigger that makes the tool comfortable and easy to use. Helical-cut steel gears with a metal housing ensure smooth operation and increased durability. This unit also features a 1/4-inch quick-change bit holder.

Manufacturer: DeWalt
SKU: 2200296
Category: Power Tools > Drills > Screwdrivers / Screw Gujs